BOYA BY-BM6060L Super Cardioid Condenser Shotgun Microphone User Manual
- June 17, 2024
- Boya
Table of Contents
BOYA BY-BM6060L Super Cardioid Condenser Shotgun Microphone
Instruction
Thanks for purchasing BOVA!
The BY-BM6060L is an improved super-cardioid shotgun microphone, features an extended length that offers extreme directionality and narrows the pick-up area, it’s perfect for interviews, indie films, and also be used in ENG (News Gathering), sound design applications, etc.
Its wide frequency range of 40Hz-20 KHz and selectable high-pass filter at 1 S0Hz delivers nature and clear sound, and increases the ability to endure loud sound sources before distortion.
Its 3-pin XLR output is in compliance with 24-48V phantom power supply or powered by one AA battery.
In addition, the BY-BM6060L includes a fur windshield and foam windscreen for an intelligible sound effect and secure protection.
Package Contents
- BY-BM6060L Microphone
- Shock mount
- Foam windscreen
- Fur windshield
- Zipper bag
- User Manual
- Warranty card
Product Structure
-
Microphone boom
-
Power indicator
-
High-pass filter switch
r Low cut – ON o OFF -
3-pin XLR output
-
Shock mount
-
Foam windscreen
-
Fur windshield
Installing the battery
- Unscrew the microphone by rotating the base clockwise and pull out the cover properly to reveal the battery compartment.
- Insert one AA battery into the compartment aligning as the right polarity.
- Close the compartment and rotate it anticlockwise to tighten it.
Features
- Ideal for indie films, lV programs, nature shows and more
- Capture accurate sound in narrow pick-up range
- Maximum reduce the noise from the rear and sides
- Robust alloy-aluminum construction
- Switchable high pass filter control (1 SOHz)
- Powered by 24-48V phantom power or a 1.SV AA battery
- Includes fur windshield, foam windscreen, zipper bag, shock mount adapter
Specification
| Type: | Condenser |
|---|---|
| Polar Pattern: | Super-Cardioid |
| Frequency Response: | 40Hz- 20,000Hz |
| Sensitivity: | -32±3 dB(0dB= l V/ Pa@l KHz) |
| Signal-to- Noise Ratio: | S0dB |
| Out put Impedance: | 2000 |
| Power Requirements: | 24-48V phantom m power or a 1.SV AA battery |
| Out put: | 3-pin XLR |
| High Pass Filter: | l S0Hz |
| Size: | q,22*38 1mm |
| Weight: | 1 7 1g (6oz) |
Customer Support
1F0300300563
SHENZHEN JIAYZ PHOTO INDUSTRIAL,, LTD,
The BOVA logo is a trademark which is registered and owned by Shenzhen Jiayz
Photo Industrial., ltd.
TEL: 400 6131096
Email: sales@boya-mic.com
www.boya-mic.com/
www.jiayz.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>