V I V O MOUNT-DLMM1 Dell OptiPlex Micro Mount Designed Instruction Manual
- June 17, 2024
- V I V O
Table of Contents
V I V O MOUNT-DLMM1 Dell OptiPlex Micro Mount Designed
Product Information
Specifications
- Product Name: Mount Designed for Dell OptiPlex Micro
- SKU: MOUNT-DLMM1
- Weight Capacity: 5lbs (2.4kg)
- Tools Needed: Phillips Screwdriver
Product Usage Instructions
Assembly Option A: Desk Clamp
- Step 1: Disassemble Clamp (C) using a Phillips screwdriver for desktops with a thickness of 10mm to 40mm. Turn Lower Clamp (C1) upside down and reassemble Clamp (C).
- Step 2: Connect Mounting Plate (A) to the backside of Clamp (C) at the desired height using M4x6mm Screws (S-B) and a Phillips screwdriver.
- Step 3: Secure Locking Plate (B) to the backside of Mounting Plate (A) using M5x6mm Screws (S-D), M5 Washer (S-G), and a Phillips screwdriver.
- Step 4: Place the assembly onto the desktop and tighten the hand bolt to secure.
- Step 5: Attach Pads (E) to the PC to protect against accidental damage, then securely place the PC into the mount. Secure using Thumbscrews (S-A). Attach Cable Straps (D) to secure the charging cord power brick.
Assembly Option B: VESA Plate – Monitor Arm
- Step 1: Secure Mounting Plate (A) to VESA holes on the back of the monitor using M4x10mm Screws (S-C) and M4 Washers (S-E) and a Phillips screwdriver.
- Step 2: Attach Locking Plate (B) to the front side of the VESA Plate from your monitor mount using M4x10mm Screws (S-C), M4 Nuts (S-F), and a Phillips screwdriver.
- Step 3: Secure Locking Plate (B) to Mounting Plate (A) using M5x6mm Screws (S-D), M5 Washers (S-G), and a Phillips screwdriver.
- Step 4: Attach Pads (E) to the PC and securely place it into the mount. Secure using Thumbscrews (S-A). Attach Cable Straps (D) to secure the charging cord power brick.
Assembly Option C: VESA Plate – Freestanding Monitor
- Step 1: Secure Mounting Plate (A) to VESA holes on the back of the monitor using M4x10mm Screws (S-C) and M4 Washers (S-E) and a Phillips screwdriver.
Frequently Asked Questions
Q: What is the weight capacity of the mount?
A: The weight capacity of the mount is 5lbs (2.4kg).
Q: What tools are needed for assembly?
A: You will need a Phillips screwdriver for assembly.
SKU: MOUNT-DLMM1
Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product.
GET IN TOUCH | Monday-Friday from 7:00 am-7:00 pm CST
- help@vivo-us.com
- www.vivo-us.com
- Chat live with an agent!
- 309-278-5303
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual and do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED
PACKAGE CONTENTS
TOOLS NEEDED
DO NOT EXCEED WEIGHT CAPACITY.
- Failure to do so may result in serious injury
ASSEMBLY OPTIONS
- Allows micro PC to clamp to a desktop surface with a thickness of 10mm to 50mm.
- Mount installs between monitor and monitor mount arm.
- Utilizes VESA holes in freestanding monitor to hold micro PC
ASSEMBLY OPTION A: Desk Clamp
STEP 1
For Desktops with a 10mm to 40mm Thickness:
- Dissemble Clamp (C) using a Phillips screwdriver. Turn Lower Clamp (C1) upside and reassemble Clamp (C) as shown below.
For Desktops with a 15mm to 50mm Thickness:
Proceed to Step 2.
STEP 2
Choose desired mounting orientation and connect Mounting Plate (A) to back
side of Clamp (C) at desired height using M4x6mm Screws (S-B) and a Phillips
screwdriver
STEP 3
Secure Locking Plate (B) to back side of Mounting Plate (A) using M5x6mm
Screws (S-D), M5 Washer (S-G), and a Phillips screwdriver
STEP 4
Place assembly onto desktop and tighten hand bolt to secure.
STEP 5
Attach Pads (E) to the PC to procect against accidental damage, then securely
place the PC into the mount. Secure using Thumbscrews (S-A).
Attach Cable Straps (D) to slots on underside of assembled mount to secure
charging cord power brick
ASSEMBLY OPTION B: VESA Plate – Monitor Arm
STEP 1
Secure Mounting Plate (A) to VESA holes on the back of the monitor using
M4x10mm Screws (S-C) and M4 Washers (S-E) and a Phillips screwdriver.
STEP 2
Secure Mounting Plate (A) to VESA holes on the back of the monitor using
M4x10mm Screws (S-C) and M4 Washers (S-E) and a Phillips screwdriver.
STEP 3
Secure Locking Plate (B) to Mounting Plate (A) using M5x6mm Screws (S-D), M5
Washers (S-G), and a Phillips screwdriver.
STEP 4
Attach Pads (E) to the PC to procect against accidental damage, then securely
place the PC into the mount. Secure using Thumbscrews (S-A).
STEP 5
Attach Cable Straps (D) to slots on underside of assembled mount to secure
charging cord power brick.
Secure VESA plate to monitor mount using manufacturer guidelines
ASSEMBLY OPTION C: VESA Plate – Freestanding Monitor
STEP 1
Secure Mounting Plate (A) to VESA holes on the back of the monitor using
M4x10mm Screws (S-C) and M4 Washers (S-E) and a Phillips screwdriver.
Secure Locking Plate (B) to Mounting Plate (A) using M5x6mm Screws (S-D), M5
Washers (S-G), and a Phillips screwdriver
STEP 2
Attach Pads (E) to the PC to procect against accidental damage, then securely
place the PC into the mount. Secure using Thumbscrews
(S-A).
STEP 3
Attach Cable Straps (D) to slots on underside of assembled mount to secure
charging cord power brick
Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us
Open Monday – Friday 7:00 am – 7:00 pm CST, our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.
- 309-278-5303
- AVG. RESOLUTION TIME (within office hrs): 5M 4S
- www.vivo-us.com
- Chat live with an agent!
- AVG. RESOLUTION TIME (within office hrs): < 15 M
- help@vivo-us.com
- AVG. RESPONSE TIME (within office hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT:
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
- Mount Designed for Dell OptiPlex Micro – VIVO - desk solutions, screen mounting, and more
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>