BOYA Omic-D Ultracompact 2.4GHz Dual Channel Wireless Microphone System Instruction Manual

BOYA Omic-D Ultracompact 2.4GHz Dual Channel Wireless Microphone System

Statement
Please read this manual carefully before using it and strictly operate and store it by the instructions. Please save the manual for your future reference. If you need further assistance than the user manual, please consult your retailer for help or email us: sales@boya-mlc.com

Cautions

1. The non-professional teardown is strictly prohibited.
2. Please keep it away from heat sources such as radiators or spotlights.
3. Do not remove the battery without professional’ help.
4. Please clean the device with only a soft, dry cloth.
5. When using and storing, please keep away from the dust and moisture.
6. For the best pick-up pattern, do not hold your hand against the microphone capsule cover.

General Introduction

The BOYA Omic is an ultra-compact and portable 2.4GHz wireless microphone system, compatible with computers, Android/ iOS mobile devices, and more. It features automatic pairing and selectable noise cancellation, delivering broadcast-quality sound with remarkable ease of use. The Omic is ideal for content creation, live streaming, vlogging, mobile journalism, and much more.
The USB-C receiver and iOS Lightning receiver are device-powered and have USB-C charging ports, which support charging and powering of devices while in use.
The included charging case allows you to charge the transmitter(s) anywhere, making the Omic kit easy to carry on.

Features

• Also available in 48kHz HD audio when noise cancellation enabled
• Wide-range 20-20,000Hz frequency response – delivers exceptional high-quality sound
• In-built rechargeable lithium-ion battery provides 5+ hours of recording
• USB-C and iOS Lightning digital output- universal compatibility with computers and Android/ iOS mobile devices
• Up to 60m wireless operating range
• The magnetic belt clip is detachable
• The charging case features wireless charging

Product Structure

Wireless Transmitter (Omic TX)

1. In-built microphone
2. Status indicator
3. Power button
4. Press and hold to power on or off.
5. Press to mute or unmute the microphone.
6. Press twice to enable or disable noise cancellation.
7. Detachable magnetic belt clip
8. Charging contacts

iOS Lightning Receiver (Omic RXD)

Noise cancellation

enabled

| Static green
Low battery| Static red
Charging| Blinking red
Fully charged| Red l!ght off

iOS Lightning Receiver (Omic RXD)

1. MFi-certified lightning connector
   It can be connected to an iOS Lightning device.

2. USB-C charging port
   When the Omlc RXO Is plugged into an external device, the external device can be powered via this charging port.
   NOTE: Phones and I IPads can be powered and charged through this port while In use, which also supports 3A fast charging.

USB-C Receiver (Omic RXU)

D USB-C connector
It can be connected to Android Smartphones, Tablets, Computers, and other USB-C devices.

USB-C charging port
When the Omic RXU is plugged into an external device, the external device can be powered via this charging port.
NOTE: Most USB·C devices can be powered and charged through this port while in use.

Charging Case (Omic CC)

1. Slot for transmitter(s)
2. Slot for receiver
3. Charging contacts
4. USB-C charging port
5. Wireless charging sector
6. Charging Indicator

How to use

1. The transmitter(s) will be turned on automatically as soon as it is taken out of the charging case.
2. Plug the Omic RXD into an iOS Lightning device or the Omic RXU into a USB-C device.
3. The transmitter (s) and receiver will be automatically paired. The indicator of the transmitter(s) is static blue.
4. Launch a video or audio recording app.
5. Select an external microphone, if applicable (app dependent).
6. You are ready to record

Tips:

1. It is recommended to record a sample and play it back to check if the audio level is acceptable before recording.
2. To improve the recording effect in a noisy environment, it is recommended that press the power button on the transmitter(s) twice at the same time to enable noise Cancellation.
3. After recording, put the transmitter(s) back into the case for charging.

Note: Due to the 2.4GHz wireless frequency, the signal can be easily attenuated. Please try to avoid obstacles, such as walls and buildings, and avoid close proximity to devices with 2.4GHz signal, such as high-powerWi-Fi antennas, radios, etc.

Troubleshooting

If you encounter problems when using the unit, please refer to the following checklist before contacting technical support. If the problem cannot be solved, please contact the dealer’s after-sales service department.
If there is no sound from the unit or no sound when connected to an external device

1. Make sure the connector on the receiver is well-connected to your device.
2. Make sure the transmitter(s) is not muted.

Current noise or other abnormal noise appears during monitoring
Make sure there is no interference near the unit. If the noise still exists after changing the unit’s position, please contact our customer service.
The operating range of the unit is limited and the sound is frequently intermittent Make sure there is no interference between the transmitter(s) and receiver. If the intermittent sound still occurs frequently, please contact our customer service.

Failed to charge the transmitter(s) via the charging case

1. Make sure the charging contacts of both are in full contact. Wipe the charging contacts with a clean cloth and try again.
2. If you want to check whether the magnetic force is aging or whether the charging contacts of the two are not in sufficient contact, press the transmitter(s) placed in the charging box to check whether it is in a charging state. If the transmitter(s) is still failed to be charged, please contact our customer service.

Specifications

Omic TX Transmitter

Omic RXD/RXU Receiver

Omic CC Charging Case

In the Box

Omic-D

• 2x0mic TX Transmitter
• 1 comics RXD Receiver
• 2xfur Windshield
• 1 xUSB-A to USB-C Cable
• 1 comics CC Charging Case
• 1 carrying Pouch

Omic-U

• 2x0mic TX Transmitter
• 1 comics RXU Receiver 2xFurWindshield
• 1 xUSB-A to USB-C Cable
• 1 comics CC Charging Case
• 1 carrying Pouch

QR SCAN

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>