CONNEX COXT938740 Safety Goggles Instructions

: June 17, 2024
: Connex

Table of Contents

CONNEX COXT938740 Safety Goggles
Product Usage Instructions:
Instructions for use for GSF – safety goggles
Identification protection against :
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CONNEX COXT938740 Safety Goggles

CONNEX-COXT938740-Safety-Goggles-product

Specifications:

Conformity with relevant Union harmonisation legislation: Regulation (EU) 2016/425 on personal protective equipment (PPE) Directive 2001/95/EC on general product safety
European Standards Used: EN 166:2001, EN 169:2002, EN 170:2002, EN 171:2002, EN 172:1994 + A1:2000 + A2:2001, EN 175:1997, EN 1731:2006
Manufacturer Code: GSF
UV Transmission: Max. 0.0003% until 313nm, Max. 0.3% until 365nm
Sunprotection Filter Level: EN 172 – 5-3.1
UV Protection Filter Level: EN 170 – 2-1.2
Number of Standard: 166
Optical Class: 1
Mechanical Strength Symbol: S/F/B
EU-Conformity Symbol: CE

Product Usage Instructions:

Identification and Protection:
The safety goggles provide protection against mechanical risks, optical radiation, welding, UV rays, IR rays, and sun exposure.

Markings:
Ensure that the frames and safety lenses have clear markings including the manufacturer code, welding filter level, UV transmission levels, and optical protection levels.

Storage and Maintenance:

Transport the item only in its original packaging.
Store at room temperature in a dry place free of dust.
Clean with water and household detergent, avoiding strong mechanical cleaning.
Disinfect with common disinfectants.

Disposal and Replacement:

Dispose of the product according to national regulations.
Use only spare lenses with CE marking and the same identification as the original.
Install lenses with the correct orientation as indicated by the ‘Innenseite’ imprint.

Adjustment and Usage:
Adjust the strap or headband for a secure fit. Ensure proper fitting to guarantee protection during use.

FAQ:

Q: How long can I use the product?
A: The product should not be used beyond 5 years from the user’s purchase date.
Q: What do the markings on the safety lenses indicate?
A: The markings indicate the level of protection against various risks such as mechanical impact, UV radiation, welding, and more.

Instructions for use for GSF – safety goggles

The safety goggles are in conformity with the relevant Union harmonisation legislation: Regulation (EU) 2016/425 on personal protective equipment (PPE) Directive 2001/95/EC on general product safety The following harmonised European Standard has been used to declare conformity: EN 166 : 2001, EN 169 : 2002, EN 170 : 2002, EN 171 : 2002, EN 172 : 1994 + A1 : 2000 + A2 : 2001, EN 175 : 1997, EN 1731 : 2006.

Marking frame: Marking lens:

GSF = Code letters of manufacturer 5 = Welding filter level according to EN 169
UV Transmission until 313nm max. 0,0003%
UV Transmission until 365nm max. 0,3%
5-3,1 = Sunprotection filter according to EN 172
2-1,2 = UV protection filter according to EN 170
166 = Number of standard GSF = Code letters of manufacturer
3 4 = Additional areas of use 1 = Optical class
S/F/B = Symbol for mechanical strength S/F/B = Symbol for mechanical strength
CE = EU-Conformity symbol CE = EU-Conformity symbol
Do not use frames or safety lenses that do not show a clear marking!

Identification protection against :

GSF 166 CE mechanical risks clear safety lenses
optical radiation according to EN 169 Welding protection filter level 1,7 to 14
optical radiation according to EN 170 UV-protection filter level 2-1,2
optical radiation according to EN 171 IR-protection filter level 4-6 or 4-7
optical radiation according to EN 172 Sunprotection filter level 5-3,1
GSF 166 S CE like above but with clear safety lens marked S for
increased robustness = 22 mm ball with 5,1 m/s
GSF 166 F CE like above but with clear safety lens marked F for
low energy impact = 6 mm ball with 45 m/s
GSF 166 B CE like above but with clear safety lens marked B for
medium energy impact = 6 mm ball with 120 m/s
GSF 166 3 4 CE Protection against liquid splashes (3) and coarse dust (4)
Packaging: Transport item only in its original packaging
Accessories: No accessories for this item available
Storage: Store at room temperature in a dry place and clear of dust
Cleaning: With clean water and household detergent (no alkalis, acids or solvents!)
Avoid strong mechanical cleaning (scratched surfaces) high amount of scattered light)
Disinfection: Article can be disinfected with all common disinfectants
Disposal: When disposing of the article, the national regulations must be observed
Adjustment: Adjustment options of strap or headband use to ensure a secure fit guarantee
Spare parts: Only use spare lenses with CE mark and the same marking
Install discs with imprint> inside <in the correct direction
Check for secure fit of lens after changing
Lens must always fit together with marking of frame
Always replace filter lenses in pairs because of possible color differences
Use: Do not use product 5 years after the user‘s purchase date

Warnings:

Do not use glasses after damage! Only use lenses with optical class 1! (optical class 3 is not intended for long-term use!) Materials that come into contact with the wearer‘s skin may cause allergic reactions in susceptible persons!
It is essential to replace scratched, dirty, damaged or differently colored discs or supporting bodies!
If lens and frames carry different mechanical resistance markings, the lower level applies to the complete eye protection product.
Eyewear against high velocity particles can present a risk of shock transmission when worn over standard prescription eyewear! Only glasses with the abbreviation for mechanical strength FT or BT are suitable for extreme temperatures!
If T in the marking is missing, the eye protection products may only be used at room temperature.
The complete eyewear is only suitable for a specific use, if the marking of the frame and the lens both indicate such use! (Compatibility of the marking!)
Do not repair damaged goggles yourself, but dispose of them!
When using color filters, ensure that there is adequate lighting in the workplace.
Do not use in traffic!

Limitation of use:
In particular, these goggles are not suitable for high speed particles (such as bolt driving tools), laser beams, temperatures over 55% Celsius, arcing faults, molten metals, infectious agents or organisms!

EU Declaration of Conformity : An EU Declaration of Conformity in accordance with PPE Regulation (EU) 2016/425 and the General Product Safety Directive 2001/95 / EC is available on the following website for this product. www.schutzbrillen.com/konformitaetserklaerung.html The user of these safety goggles must check the instructions for the welding machine to determine whether the safety lenses installed in this PPE meet the requirements.