SOUNDMAX LED32M10 LCD TV with LED Backlight Instruction Manual

SOUNDMAX LED32M10 LCD TV with LED Backlight

LCD TV with LED backlight TeneBM30p
SM-LED32M 10
Instruction manual

Dear customer!
Thank you for purchasing our product. For safety, it is strongly recommended to read this manual carefully before connecting, operating and/or adjusting the product and keep the manual for reference in the future.

The terms HDMI and HDMI High-Definition Multimedia interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator,lnc. in the United States and other countries.

Utilization of the product
If you want to dispose of this product, do not mix it with general household waste. There is a separate collection system for used electronic products in accordance with legislation that requires proper treatment, recovery and recycling.
Please contact your local authorities for the correct method of disposal. By doing so, you will ensure that your disposed product undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health.

Important safeguards

• Please unplug the power cord from the AC  outlet and contact a service center for repair .if following occurs: any obvious abnormality appears in the unit, such as smoky, peculiar smell or strange sound; liquid has been spilled or other objects have fallen into the unit; no picture or sound; cover or panel is broken; although you have operated the unit following the operating instructions, it still cannot work normally.
• This unit can be connected to a power supply outlet without the third ground contact as well as with a ground contact.
• Always disconnect the power cord and antenna during a storm.
• Do not fix the power cord with a metal nail.
• Unplug the power cord from the AC outlet; also unplug the signal cables from the input ports when the unit is unused for long periods of time.
• When unplugging the plug, always hold the  wide slot, do not touch the metal part, and do not destroy, twist, pull or roast the power cord.
• Please contact the service center immediately if you found that the core is showed in the air or has been broken.
• Please replace the AC outlet if the metal bolt cannot be inserted into the power socket completely or it cannot be fastened even when it was pushed in, otherwise, any accidents of shocks and fires would happen.
• Never touch the antenna lie or power plug if it stars to thunder.
•  Do not touch the power plug with wet hands.
• Do not use any non-rated power socket with numerous devices jointed on one power socket or cable device. The wire of non ­designated capacity may cause the fire due to the generation of heat.
• All instructions must be read and understood well before you operate the unit. Heed all warnings and follow all instructions.
• Please use the accessories provided by the manufacturer. Using inadequate accessories may result in accidents.
• Please adjust the product through the panel buttons or the remote controller, do not remove the cover or attempt to service the product by yourself. Do not disassemble back cover and do not make maintenance by yourself to avoid the electric shock.
• Over-press the panel may destroy the product.
• Do not place the product on an unstable cart, stand surface, tripod, bracket, or table. The product may fall, causing serious accidents as well as the damage to the product.
• Please place the product on a flat surface in a well-ventilated location. Keep it away from the burning-light, direct sunlight, vibration, high-temperature and humidity.
• Do not place any vase, potted plant, cup, medicine and any container with water on this  product. If the liquid is spilt, it may cause the fire, electric shock or breakdown.

Before you start

• Do not install it at the place on the strong magnetic field or current field. It may cause break down. This equipment may be observed deterioration of the picture by electromagnetic radiation in electromagnetic environment.
• Fasten the wheel of the product or shelf with wheels when installing this product. If it moves or is tipped over, it may be damaged.
• Do not place any fire source such as candlelight close to this product or place it on this product. If it is tipped over or fallen down, it may cause damage or fire.
• Do not place the unit into closed space of TV for better ventilation; it can reduce the product lifetime. Keep a space at least 1 0 cm at above, left, and right of the TV.
• Please place all the signal cords behind of rear panel.
• Do not overexert or touch the panel when you convey the product. Do not transfer the LED TV up or down display direction.
• Do not transport it with the power cord or the connection cable connected. If you move this product with the power cord or the connection cable connected, damaged power cord, connection cable or connection terminal may cause fire, electric shock or breakdown.
• 2 persons or more shall transport the device, which is heavier than 18 kg. If you drop or tip over the device, it may damage it.
• The temperature of the product’s body becomes a little higher after a long period use. This phenomenon indicates that heat exchange in normal working mode, thus please do not let children or anyone who is sensitive of temperature to touch.

All images provided herein are schematic drawings and may differ from real objects.

WARNING
In order to avoid damage, make sure to secure the unit on the wall according to the wall mounting instruction .

Wall or ceiling mounting implements must be durable and sufficient enough to support the weight of the unit.
If you do not have sufficient skill and a set of tools to carry out installation work of a technically complex product, we recommend that you hire a third ­party qualified contractor to avoid damage to the product or injury.

Connection

Outdoor antenna connection
Use 75 Ohm cable plug or 300-75 Ohm impedance converter to plug in antenna in plug in  terminal on the rear of the cabinet.

Other connections

CVBS input

| Connect the video source to the AV input using a CVBS cable (not included).
Stereo audio input

| Connect the audio source to the Left and Right stereo audio input
Optical output

| Connect the optical output to the optical input on audio device using an optical cable (not included).
HDMI input

| If the video source has an HDMI output jack, you can connect the signal to the monitor with the HDMI cable (not included).
Mini YPbPr input

| Component input YPbPr is intended to receive component video signal from the external device. Connection is made with

the help of a special component cable (not included).

-Cl slot

| PCMCIA (Cl) slot is used for Cl modules that are obtained from your digital TV provide-.
Earphone output

| Conned your ear phones(not included)to the ear phone sock Et of the unit. When earphones are connected, the sound output through the built-in speakers of this unit is mute.

 Operation

Control elements

1. IR sensor/power indicator

2. Button panel:
   INPUT button
   MENU button
   CH+ button
   CH- button
   VOL+ button
   VOL- button
   POWER button

3. Composite AV input

4. Optical audio output

5. TVRF antenna input

6. HDMl1/ARC input

7. HDMl2 input

8. USB ports

9. Component mini YPbPr input

10. Earphone socket

11. Cl (PCMCIA) slot Remote controller (RC)

12. MENU button

13. INDEX button

14. TEXT button

15. BACK / HOLD button

16. FORWARD / SUBPAGE button

17. SUB-T button

18. TV /RADIO button

19. Color buttons (Red, Green, Yellow, Blue)

20. MUTE button

21. RETURN button

22. FAV button

23. FAV- button

24. P.MODE button

25. VOL+ button

26. VOL- button

27. ASPECT button

28. INFO button

29. EXIT button

30. PLAY/PAUSE / MIX/T button

31. STOP / REVEAL button

32. NEXT / CANCEL button

33. PREVIOUS / SIZE button

34. EPG button

35. REC button

Changing the battery

1. Remove the battery compartment cover on the back of the RC.

2. Insert the batteries into the battery compartment making sure that the correct polarity is observed.

3. Install the cover back.

4. POWER( ) button

5. Numeric buttons

6. -/– button

7. AUDIO button

8. FAV+ button

9. CH+ button

10. CH- button

11. S.MODE button

12. INPUT button

13. SLEEP button

14. Cursor buttons (UP/DOWN/LEFT/RIGHT} / OK button

• Use two AAA batteries for the RC. The RC should be pointed at remote sensor within 8 meters and within 30 degrees at the left or the right side.
• Take the battery out of the RC if it is not used for a long time.
• Do not mix new and used batteries or different types of batteries. Weak batteries can leak and severely damage the RC.
• Do not expose the RC to shock, liquids, and do not place it in an area with high humidity.

CAUTION!
Incorrect installation of the batteries may lead to an explosion.
Please replace used batteries with the batteries of the same or comparable type.

General operations

• Press < > button on the unit or on the RC to switch on the power. Press POWER button again to switch the unit off and go the the stand-by mode. To completely power off the unit unplug the power cable from the outlet.
• Press VOL- button repeatedly to decrease the volume; press VOL+ button repeatedly to increase the volume.
• Press SLEEP button repeatedly to set the sleep time.
• Press EPG to launch the Electronic Program Guide (EPG).
• Press SUB-T to show and set the language of a current DTV channel.
• Press REC to begin recording of current playback in PVR mode.
• Press button on the RC to select from the present channel and the previously displayed channel.
• Press ASPECT button repeatedly to select a screen display size from the available list: 4:3/16:9/Zoom1 /Zoom2/Panorama. Available aspects may differ for different signal sources.
• Press MUTE button to cut off sound, press this button again or adjust volume to resume sound.
• Press TV/RADIO button to switch between TV and radio modes when watching channels.
• Select the TV function mode. Press CH-/CH+ buttons to select previous or next channels; or press number buttons and -/-­to enter a channel number directly.
• Press P.MODE button repeatedly to cycle through the available video picture modes.
• Press S.MODE button repeatedly to cycle through the available sound modes.
• Press INFO button to display the preset TV channel play information.
• Press FAV button to show the favorite  channel list and FAV+/- buttons to add/ remove favorite channel.
• Press AUDIO in TV mode repeatedly to switch between various Nizam sound modes (can be unavailable for some channels).

Signal sources
Press INPUT button, then press DOWN/UP cursor buttons on the RC or CH+/CH- buttons on the panel to select a source from the list. Press OK button on the RC or MENU button on the panel to confirm. Press EXIT to exit.

TELETEXT operations (option)

• Select the TV source mode. Then press CH-/CH+ buttons to select TV channel in order to pick up the picture signal of Teletext.
• Teletext button functions are as follows: TEXT : Press this button to enter into Teletext mode. Follow the guides on screen and use the color buttons to navigate the Teletext.
• Red/Green/Yellow/Blue buttons : Press these 4 color buttons to access directly to corresponding color page displayed at the lower parts of teletext screen.
• REVEAL : press this button to display and reveal hidden information.
• SUBPAGE : press to access a subpage of the Teletext.
• HOLD : press this button to stop the move to the next page. Press this button again to cancel operation.
• INDEX : press this button to go to the index page.
• SIZE : press to adjust the size of Teletext.

OSD operation

1. Press MENU button to enter the setting menu displayed on the screen.
2. Press LEFT/RIGHT cursor buttons on the RC to select setting page.
3. Press OK button on the RC to go to the parameter list.
4. Press UP/DOWN cursor buttons on the RC to select a parameter to adjust.
5. Press LEFT/RIGHT cursor buttons on the RC to adjust the selected parameter.
6. Press MENU button to return to the previous menu page. Press EXIT button on the RC to quit the menu.
   Some menu items may be in gray color, in this case they are not adjustable. Pictures of OSD menu are for reference only; they may differ from the real screens.

Channel setting

• Auto Tuning : press OK to select the country and tuner type for channels to start automatic search and saving of available ATV channels. After the search is finished, the unit will skip to searching DTV channels, Radio channels and Data. During the ATV search, press MENU button to skip to DTV, Radio and Data search.

• ATV Manual Tuning
  Current CH : select channel number. Color System: select corresponding color system.
  Sound System : select corresponding sound  system.
  Fine-Tune : perform fine adjustment of the current frequency.
  Search : press LEFT/RIGHT buttons; the unit will search for next available channel downward or upward and save it under the current number.

• DTV Manual Tuning : Press LEFT/RIGHT cursor buttons to select channel number. Press OK button to start searching. If the selected channel number is available, the channel will be saved under the selected number. Press MENU button to quit.

• Programme Edit : this item allows you to sort TV programs according to your preferences. Enter the program edit menu:
  Delete : Select the channel you want to delete. Press red button to delete the channel.
  Move (not available for DTV channels with LCN) : Highlight the needed channel. Press yellow button; select the position to put the channel into. Press yellow button to confirm.
  Skip : Highlight the needed channel. Press blue button; now this channel will be skipped when you select previous/next channels.
  Fav : select a channel and press the FAV+ button to add it to your list of favorite channels. Press FAV- to remove the channel from favorites.

• Schedule List: See the schedule of TV programmes.

• Signal Information : View the information Signal Information: View the information

• Cl Information (only in DTV mode) : This function enables you to watch some encrypted services (pay services). Please insert a Cl card into the PCMCIA slot according to the arrow on the Cl card.

• The function can only be gotten when Cl slot is available.

• It is possible for you to change Cl (Common Interface) menu screen and service by consulting your dealer.

• Please do not insert or pull out the Cl card when power on. During initialization of the Cl  card, please don’t operate the TV.

• Do not insert or pull out the Cl card frequently so as to avoid any damages of the TV and the Cl card.

• Logical Channel Number : Enable or disable channel sorting using the logical channel number.

Picture setting

• Picture Mode : Dynamic/Standard/Mild/ Personal. When Personal mode is selected, you can adjust contrast, brightness, colour, tint (NTSC signal only) and sharpness of the image.
• Colour Temperature : Cold/Normal/Warm.
• Noise Reduction : Dynamic noise reduction effect for reducing the video noise level. Select the Off/Low/Middle/High/Default mode.
• HDMI Mode : adjust the picture settings when HDMI is selected as a source signal.

Sound setting

• Sound mode : Standard/Music/Movie/ Sports/Personal. When Personal mode is selected, you can adjust treble and bass.
• Balance : adjust the balance between the left and the right speaker.
• Auto Volume Level : reduce the difference between channel and program volume automatically.
• SPDIF Mode : Select the digital audio output mode: Auto/PCM/Off.
• AD Switch (in DTV mode): This is an auxiliary audio function that provides an additional audio track for visually challenged persons. This function handles the Audio Stream for the AD (Audio Description), when it is sent along with the Main audio from the broadcaster. Users can turn the Audio Description On or Off and control the volume.

Time setting

• Clock : You can display either the DTV  signal stream time or set the system time.
• Time Zone : select your time zone.
• Sleep Timer : select the period until automatic switch-off of the unit.
• Auto Standby : select the period after which the TV turns off automatically if no input is given.
• OSD Timer : select the time during which the OSD menu stays visible.

Lock setting

• Lock System : The feature can prevent unauthorized operation of the TV set unless entering a 4-digit password. When Lock System is on and the system is locked, you must input the system password at Auto Tuning, Manual Tuning, Programme Edit or Default. Press the right number buttons for the password. The default password is 0000.
  It After a password correction has been confirmed, please remember it for entering into the Parent Guide menu, all functions can not be activated until the correct password is entered.

• Set password : You can set your private password. Press the number buttons on the remote control to set the new password. When the new password has been put in twice, the setting is finished successfully. The TV will go back to previous menu.

• Channel Lock (in TV/DTV mode): Press Green button to lock the available channel you want. Press Green button again to unlock it.

• Parental Guidance : set the access to age-restricted content.

• Keyboard Lock : lock and unlock the buttons on the TV set.

• Hotel Mode : when the Hotel Mode is enabled, the main menu is blocked. You can still control the volume as well as picture and sound modes, but channel search is restricted.

Setup menu

• Language: select the language of the on-screen display (OSD) menu.

• TT Language : select the language of the Teletext.

• Audio Languages : select the language of audio (available for some DTV channels).

• Subtitle Language : select subtitle language (available for some DTV channels).

• Hearing lamprid : When Hearing Impaired is on, the screen will give some information to people whose hearing is impaired. When Off, the information will be hidden.

• PVR File System (in DTV mode)
  Select Disc : select the storage used for PVR. Time Shift Size: select the time for Time Shift.
  Format : format the USB.
  Speed Check : display the speed of the storage.

• Aspect Ratio : select the aspect ratio from the suggested options.

• Blue Screen : toggle showing blue screen when there is no signal.

• First Time Installation: redo the initial setup.

• Reset : reset the parameters to initial factory settings.

• Software update (USB): Update TV software using a USB storage device.

• Environment : select an environment where the TV is used. It affects the power consumption.

• HDMI CEC : switch the HDMI Consumer Electronic Control feature on or off .

USB operation

General information

1,1 USB file systems supported: FAT32. 2.0 USB version is supported. Maximum capacity 1 TB. For correct and satisfactory operation, licensed USB devices of well­  known brands should be used with this unit. Avoid using USB devices of unknown brands. Playback of photos and music of only JPEG and MP3 format is supported. The output capability of the USB port is 500 mA.

This unit supports playback of video files with AVI, TS, MP4, MKV, MOV extension, with video codecs H264/AVC, H263, MPEG1/2/4 and audio codecs PCM,
MP3, AC3.
e The above list of extensions and codecs is for information only and is not a guarantee that all files having the above extensions and codecs should be read by this unit.

Some AVI files cannot be played due to their parameters and recording conditions. Video files with AVI extension exceeding 2 GB in size may be played partially.
1,1 According to the USB 1.1/2.0 Standard, usage of a USB device with power current consumption exceeding 500 mA is not recommended without supplementary power supply. Failure to use supplementary power for connected USB drives with power consumption exceeding this value as well as defective USB drives may cause mechanical or thermal changes of elements of this unit as well as failure of internal elements of the USB port. Such damages are not warrantee cases.
Warning : usage of external USB drives containing BIN files in the root directory may cause malfunction of the unit or damage to the software.

File playback
Insert a USB into the USB jack. Press INPUT button, select Media option and press OK button. The screen will show USB playback menu.

• Video file playback : Select Movie item and press OK button. Press cursor buttons to select a file and press OK button to start playback. During playback press MENU button to show playback menu in which you can select an operation by LEFT/RIGHT cursor buttons and perform this operation by pressing OK button. The operations include Play/Pause, FB, FF, Prev., Next, Stop, Charset, Repeat Mode, AB Repeat setting, Playlist, Info., Slow Forward, Step Forward, Go to Time, Zoom In, Zoom Out, Aspect Ratio, Move View. To exit video playback press EXIT button.

• Photo file playback : Select Photo item and press OK button. Press cursor buttons to select a file and press OK button to start playback. During playback press MENU button to show playback menu in which you can select an operation by LEFT/RIGHT cursor buttons and perform this operation by pressing OK button. The operations include: Play/
  Pause, Prev., Next, Stop, Repeat Mode
  Music, Playlist, info., Rotate(Clockwise),Rotate (Counterclockwise),Zoom ln, Zoom Out, Move View. To exit photo playback press EXIT button.

• Music file playback: Select Music item and press OK button. Press cursor buttons to select a file and press OK button to start playback. During playback press MENU button to show playback menu in which you can select an operation by LEFT/RIGHT cursor buttons and perform this operation by pressing OK button. The operations include Play/Pause, FB, FF, Prev., Next, Stop, Repeat Mode, Mute, Playlist, Info. and Go to Time. To exit music playback press EXIT button.

Cl Information
(only in DTV mode): This function enables you to watch some encrypted services (pay services). Please insert a Cl card into the PCMCIA slot according to the arrow on the Cl card.

•  The function can only be available when Cl card is present.
• It is possible for you to change Cl (Common Interface) menu screen and service by consulting your dealer.
• Please do not insert or pull out the Cl card when power on. During initialization of the Cl card, please don’t operate the TV.
• Do not insert or pull out the Cl card frequently so as to avoid any damages of the TV and the Cl card.
• If there is no picture and/or sound with the Cl+ CAM module inserted, please contact the customer support of the service provider.

Electronic programme guide (EPG)

If you know the airing time of the current programme you can access the EPG menu
by pressing the EPG button on the RC. The menu displays date and lime in the top right corner, the list of the current available channels on the left, and the name of each programme starting in scheduled lime periods on the right. Select the channel by pressing UP/DOWN and the programme by pressing LEFT/RIGHT.
Follow the on-screen instructions and use color buttons to navigate this menu.

PVR/Time shift function

Insert a USB drive, the system will automatically create a folder to store the files recorded. Recording begins when REC button is pressed, and it records all the time until ■ button is pressed or the memory is full.
PVR/Time shift is a feature enabling you to record an air program while you are away. Press button to activate Time Shift while recording. You can operate referring to PVR/ Time shift menu on the screen.

Troubleshooting

Below is a table describing simple measures that can help you eliminate most problems likely to emerge when this unit is in use. If below measures do not help, turn to a service center or to the nearest dealer.

Symptom                Cause Solution

No picture, no sound, and no indicator light| The power cord is not plugged in. Contrast, brightness, color and volume are all in the minimum value or TV is in mute mode.| Plug the power cord in. Alter the value of contrast, brightness, color and volume.
---|---|---
Picture and  Contrast and color are set improperly. sound with  Color system is set improperly. abnormity              Sound system is set improperly.| Set the value of Contrast and color properly.
Set the sound system properly.

No sound| No audio signal or the signal cord is improperly/not connected.| Connect the audio signal cord properly.
Set the sound system properly.
---|---|---
The RC does not work| Batteries are improperly installed or exhausted.| Make sure the positive and the negative polarities are correct. Reattach the battery lid.
Replace the batteries.

Causes of interference
Incorporated in your TV receiver are the most up-to-date devices to eliminate interference. Local radiation however, can create disturbances, which visibly affect your picture. Proper installations, a good aerial are your best safeguards against these disturbances.

• RF INTERFERENCE: Moving ripples across the screen are caused by nearby transmitting or receiving short-wave radio equipment.
• DIATHERMY : Herringbone pattern and partial picture loss can result from the operation of diathermy equipment from a nearby doctor’s surgery or hospital.
• SNOW : Weak TV signals from long distant stations result in an instead picture and give the effect of falling snow. An antenna adjustment or antenna amplifier may be needed.
• GHOST : Multiple image, caused by TV signals reflected back from surrounding buildings, hills, aircraft, etc. is minimized by correct aerial positioning.
• CAR IGNITION : Nearby cars and electrical motors can cause small streaks across the picture or make the picture roll.

Accessories

1. LED TV                              1 pc
2. Remote controller          1 pc
3. Battery                              2 pcs
4. Stand                                2 pcs
5. Screw                                4 pcs
6. Instruction manual        1 pc

Specifications

The LED panel is a high technology product with many thin film transistors that can give you a fine picture details. Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green, red, black or white, please note that this does not affect the performance of your LED TV.
The actual glow of the power indicator in operating/standby mode may differ from the description in the User Manual
Warning : Specifications may be subject to change without notice for improvement.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>