Fittes Luxe Flush Wall Vent Installation Guide
- June 17, 2024
- Fittes
Table of Contents
Fittes Luxe Flush Wall Vent
Specifications
- Product Name: Flush Wall Vent [Luxe]
- Model: Flush Device Mount [Luxe]
- Manufacturer: Fittes
Flush Wall Vent Installation
- Dry-fit Body into duct opening.
- Ensure flange is flat to the wall. Use drywall screws to fasten.
- Use mud to cover flange surfaces. Wait to dry, then sand. Repeat as needed.
- Sand mud so surface transitions smoothly. Repeat steps 3, 4 as needed.
- Paint the Body to match the surrounding wall surface. If using wallpaper, do not cover the Body.
- Paint or wallpaper Tray to match the Base and surrounding wall surface.
- Adjust dampers to the open position.
- Insert and slide the Tray in place. Enjoy!
Control Air Flow
Slide to remove the Tray and adjust the dampers open and closed. For optimal
airflow, push past 90º.
Additional Support
support@fittes.com
www.fittes.com
Patent Information
www.fittes.com/pages/
Installation
- Dry-fit Body into duct opening.
- For use as a Device Mount: Bend dampers outward.
- Optional: Fit the octagonal electrical box onto the rear of the Flush Wall Vent.
- Optional: Secure using screw holes provided. Tabs can be folded flat and
- Ensure flange is flat to the wall. Use drywall screws to fasten.
- Use mud to cover flange surfaces. Wait to dry, then sand. Repeat as needed.
- Insert and slide the Tray into place.
- Paint the Body and Tray to match the ceiling color and enjoy!
Control Air Flow
Slide to remove the Tray and adjust the dampers open and closed. For
optimal air flow, push past 90º.
Additional Support
Support@fittes.com
www.fittes.com
Patent Information
www.fittes.com/pages/patents
FAQ
- Q: Can I cover the Body with wallpaper?
- A: It is advised not to cover the Body with wallpaper to ensure proper functionality.
- Q: How do I adjust the dampers?
- A: Adjust the dampers to the open position for optimal ventilation. Refer to step 7 in the Installation Guide for details.
Read User Manual Online (PDF format)
Loading......