Fittes 4×9 Framed OG Floor Vent Luxe Installation Guide
- June 17, 2024
- Fittes
Table of Contents
Framed OG Floor Vent [Luxe]
Return
Install Guide
4×9 Framed OG Floor Vent Luxe
Materials Needed
- Pre-cut piece of surface material for tray insert
- Size will vary depending on model
- Bonding material (will vary for fooring materials)
- 2x self tapping screws (optional)
Dry fit Aria Vent body piece in opening.
Secure vent with screws.
Apply adhesive bonding material in tray. Insert pre-cut flooring material.
Flip tray and allow bonding material to cure. Ensure flooring material is flush with the rim.
Insert tray into the body.
Slide in place. Enjoy!
Materials Needed
-
Pre-cut piece of surface material for tray insert.
(Size will vary for vent sizes). -
Bonding material (will vary for flooring materials).
Dry fit Aria Vent body piece in opening.
Apply adhesive bonding material in tray. Insert flooring material.
Hold in place. Flip tray upside down. Apply even pressure until flooring material lies flat with rim of tray.
Leave bonding material to cure.
To open air flow, push down the dampers in body. This can be done anytime after install.
Insert tray. Slide in place. Enjoy!
Control Air Flow
Slide to remove tray and adjust flange open and closed.
For optimal air flow, push flanges past 90º.
Additional Support
support@fittes.com /
www.fittes.com
Made in Canada
Documents / Resources
|
Fittes 4x9 Framed OG Floor Vent
Luxe
[pdf] Installation Guide
4x9 Framed OG Floor Vent Luxe, 4x9, Framed OG Floor Vent Luxe, Floor Vent
Luxe, Vent Luxe, Luxe
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>