Fittes Lite Framed Floor Vent Installation Guide
- June 12, 2024
- Fittes
Table of Contents
Fittes Lite Framed Floor Vent
Product Information
- Product Name: Framed Floor Vent [Lite]
- Install Guide: Included
Materials Needed
- Pre-cut piece of surface material for tray insert (Size will vary for vent sizes)
- Bonding material (Will vary for flooring materials)
Note: If the duct opening is larger than the base of the vent, use
additional screws to add strength.
Control Air Flow: No airflow is included with this model. See which Lite
Dampers are compatible with this product at
www.ariavent.com
Additional Support
- Email: support@fittes.com
- Website: www.fittes.com
Made in: Canada
Product Usage Instructions
- Cut a piece of surface material for the tray insert. The size will vary depending on the vent size.
- Prepare the bonding material suitable for your flooring material.
- Apply adhesive bond in the tray of the vent.
- Insert the pre-cut flooring material into the tray.
- Apply even pressure to ensure that the floor material is level with the rim of the tray.
- Allow the bonding agent to cure.
- Insert the vent in place.
- Enjoy!
Materials Needed
- Pre-cut piece of surface material for tray insert. (Size will vary for vent sizes).
- Bonding material (will vary for flooring materials).
NOTE
If the duct opening is larger than the Base of the vent, use additional screws
to add strength.
- Apply adhesive bond in Tray.
- Insert pre-cut flooring material.
- Apply even pressure so the floor material is level with the rim of the Tray. Let cure.
- Insert vent in place.
Control Air Flow
No airflow included with this model. See which Lite Dampers are compatible with this product at www.ariavent.com
Additional Support
www.fittes.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>