UMIDIGI A13 Tab 10.51 Inch User Manual
- June 17, 2024
- Umidigi
Table of Contents
UMIDIGI A13 Tab 10.51 Inch
Specifications
- Model: A13 Tab
- Operating System: Not specified
- CPU: Not specified
- GPU: Not specified
- RAM: Not specified
- ROM: Not specified
- Battery: Not specified
Dear customer,
Thank you for purchasing our product. Please read the following instructions
carefully before first use and keep this user manual for future reference. Pay
particular attention to the safety instructions. If you have any questions or
comments about the device, please contact the customer line.
OVERVIEW
- Power button: Long press the power button to turn on the device. When the device is on, short-press the power button to turn the screen on and off.
- Volume button: Short press the volume button to adjust the volume or to mute incoming calls.
Card Management
When the tablet is on, it is not recommended to pull out the card tray. Only pull out the card tray when the phone is off.
SIM Card Insertion
Face the chip side of the Nano SIM card down when inserting the card into the
slot. Be aware of the direction of the cut edge when placing the Nano SIM card
into the slot.
Reminder: Please use a standard Nano SIM card. Don’t use a non-standard card that is hand-cut, to prevent the SIM slot and card tray from being damaged and card rejection situation that may cause damage to the device.
Memory Card Insertion
Please place the metal contact of the memory card down, and be aware of the
direction ofthe cut edge. Place the card onto the tray and insert it into the
device.
Reminder: Please turn off the tablet before changing or replacing the
memory card.
Memory card does not come with the tablet, please purchase it separately.
Dual SIM Management
Please choose which SIM card slot is to be the main one for 5G network via
Settings > SIM Card. Choose your preferred network types of 5G/4G/3G/2G via
Settings > Network & Internet > Mobile Network > Preferred Network Type.
Operation Description
Network Connection
- WLAN Connection
- Enter the WLAN settings via Settings > Network & Internet > Wi-Fi. When WLAN is on, a list of available Wi-Fi connections will appear. Click on the one you want to connect to, enter the password if the network is encrypted, and then click on Connect. When it’s a public network, simply click on Connect and when it shows “connected” next to the network, it means you can access the local network and/or the internet.
- Bluetooth Connection
- Enter the Bluetooth settings via Settings > Connected Devices > Bluetooth. Enable the Bluetooth function by clicking the menu button and selecting “refresh”, then the phone will search for available Bluetooth devices for pairing and list them on the screen.
- Click on the one you want to pair with, then click on “Pair” on the dialogue pop-up. Documents are available for transmission after Bluetooth pairing.
Reminder: Slide down the status bar twice to open the shortcut switches for Bluetooth and other functions.
WLAN Hotspot Settings
Enter the Hotspot settings via Settings > Network & Internet > Hotspot &
Tethering > WiFi Hotspot to turn on the portable WLAN hotspot function. When
setting up the WLAN hotspot, enter your username in the “Network Name” and
password, then click “Save”. Another device can use the WLAN hotspot by
searching for the network and entering the password. As hotspots are usually
used by your friends and acquaintances to access the internet, it is
recommended to use a password that you don’t use for your private accounts.
Reminder: Please enable the Data Connection before enabling the network sharing function. Your mobile traffic will be shared by other devices, so please use it carefully. The signal of the WLAN hotspot depends on the signal strength and devices connected.
Camera
Aim the camera at the object you want to take a photo of, the phone will start
to focus it automatically. Alternatively, you can click on the screen to
choose an object you wish to focus on. Then click the capture icon to take the
photo. You can also choose other modes, such as video recording, beautifying,
or panorama.
Dual-Card Standby
“Dual card, dual standby, single pass” means you can insert two SIM cards and
have
them both “standby”, but they cannot make a phone call at the same time.
During the
standby mode, both cards are available for receiving phone calls, but once one
of the
cards is activated, the other one cannot receive phone calls nor make phone
calls.
Security Information
- Security information (including BS, ES, and battery security information) of third-party software installation and function may vary in different regions or by different hardware specifications. Umidigi holds a disclaimer for the performance problem or incompatibility caused by third-party applications, registry editing, and OS software modifying. Customizing the OS may cause the device or some applications to fail to work properly.
- Please prevent using the device in extremely cold/hot conditions. The extreme temperature will lead to deformation of the phone and reduce the charging capacity and battery life.
- Please only use the custom-designed and approved battery and recharger by Umidigi. An incompatible battery and recharger may cause damage to the phone. Please abide by local regulations when disposing of the used batteries and phones.
- Please do not place the battery or the phone onto or inside heating devices such as microwaves, ovens, or radiators. The battery may explode if it gets too hot.
- Please do not crush or pierce the battery. Prevent the battery from getting high pressure from outside. It may cause internal short-circuit and overheating.
Specifications
Basic Information
- Model MT07
- Operating System Android™ 13
- CPU T616 2× A75 @ 2.0GHz + 6× A55 @ 1.8GHz
- GPU ARM Mali-G57 1Cocre @ 750MHz
- RAM 8GB
- ROM 128GB
- Battery 7500mAh
Display
- Screen Size 10.5 inch (26.67 cm)
- Resolution 1920×1200 pixels
- Touch Capacitive multi-touch
Cameras
- Rear Camera 13Mpx + 5Mpx
- Front Camera 8Mpx
Connection (I/O)
- Bandwidth
- 4G: LTE FDD: B1/2/3/4/5/7/8/12/17/20/28A/28B/66
- LTE TDD: B38/40/41 (2535-2655)
- 3G: WCDMA: B1/2/4/5/8
- 2G: GSM: B2/3/5/8
- SIM/Memory Card 2× Nano SIM card / 1× Nano SIM card + 1× Memory card
- Wi-Fi IEEE802.11 a/b/g/n/ac
- Bluetooth Bluetooth 5.0
- GNSS GPS, Glonass, Galileo
- FM Yes
- Earphone Port 3.5mm
- USB Port Type-C
Other Features
- Video File Format 3GP, MPEG4, etc.
- Audio File Format WAV, MP3, AAC, AMR, MIDI, APE, WMA, etc.
- Memory Card supports up to 512GB
- Language Multi-language
- Sensor G-Sensor, Compass
FAQ
Frequently Asked Questions
- Q: Can I use a non-standard SIM card in this device?
- A: It is recommended to use only standard Nano SIM cards to avoid damage to the device.
- Q: How do I adjust the volume on this device?
- A: Use the volume buttons on the side of the device to adjust the volume or mute incoming calls.
www.alza.co.uk/kontakt
+44 (0)203 514 4411
Importer: Alza.cz a.s., Jankovcova 1522/53, Holesovice, 170 00 Praha 7,
www.alza.cz
References
- Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
- alza.at
- Alza | Alza.co.uk
- Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
- Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
- Alza.cz
- alza.de
- alza.hu
- alza.sk
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>