nedis ZBLC10E14 SmartLife Full Colour LED Bulb User Guide

: June 17, 2024
: nedis

Table of Contents

Specifications
Intended use
Safety instructions
Installation of the Nedis SmartLife app
Using the product
Declaration of Conformity
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

nedis ZBLC10E14 SmartLife Full Colour LED Bulb

nedis ZBLC10E14 SmartLife Full Colour LED Bulb

Specifications

Product	Zigbee Smart Bulb	Zigbee Smart Bulb	Zigbee Smart Spot
Article number	ZBLC10E27	ZBLC10E14	ZBLC10GU10
Max. brightness	806 lm	470 lm	345 lm
Light colour	RGB + 2200 – 6500 K
Power supply	220 – 240 V ~ 50 / 60 Hz
Fitting type	E27	E14	GU10
Wattage	9 W	4.9 W	4.7 W
Current	53 mA	43 mA	40 mA
Wireless technology	Zigbee
Zigbee frequency range	2405 – 2483 MHz
Zigbee transmission protocol	IEEE802.15.4
Max radio transmit Power	10 dBm

For more information see the extended manual online: ned.is/zblc10e14 | ned.is/zblc10e27 | ned.is/zblc10gu10

Intended use

The Nedis ZBLC10E14 | ZBLC10E27 | ZBLC10GU10 is a bulb that allows you to wirelessly control the light.
The product is exclusively intended for lighting an indoor or outdoor environment.
The product is intended to be controlled exclusively via the Nedis SmartLife app.
You can connect the product wirelessly to the Nedis SmartLife app via the Zigbee gateway.
Any modification of the product may have consequences for safety, warranty and proper functioning.

Main parts (image A)

Bulb
Electric contact

Safety instructions

WARNING

Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep the packaging and this document for future reference.
Only use the product as described in this document.
Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately
Do not drop the product and avoid bumping.
This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
Do not expose the product to water or moisture.

Installation of the Nedis SmartLife app

Download the Nedis SmartLife app for Android or iOS on your phone via Google Play or the Apple App Store.
Open the Nedis SmartLife app on your phone.
Create an account with your mobile phone number or your e-mail address and tap Continue.
Enter the received verification code.
Create a password and tap Done.
Tap Add Home to create a SmartLife Home.
Set your location, choose the rooms you want to connect with and tap Done.

Connecting to the Zigbee gateway (image B)

Back
Add device
Settings
List of added devices

Make sure the Zigbee gateway is connected to the Nedis SmartLife app.
Make sure the bulb is within range of the gateway.
For information on how to connect the gateway to the app, consult the manual of the gateway.

Open the Nedis Smartlife app on your phone.
Select the Zigbee gateway to enter the gateway interface.
Tap the Add device button B2.
Screw the bulb into the correct fitting.
Switch on the bulb using a wall switch.
Check if the bulb is blinking. If so, tap to confirm.
If the bulb does not blink, turn the lamp off and on 3 times and check again previous step.
Tap to confirm the bulb A1 is blinking.
The bulb appears in the app when the product is successfully connected to the gateway.
Rename the bulb after it has been found and added.

Using the product

The product can be controlled from any distance using the Zigbee Gateway via the Nedis SmartLife app while connected to the same network.
The home menu of the Nedis SmartLife app (image B) shows a control tile for each connected lamp and/or group.
The product can be connected to Google Home or Amazon Alexa to enable speech control.
The product can be connected to IFTTT to enable external conditions to trigger the lamp

Declaration of Conformity

We, Nedis B.V. declare as manufacturer that the product ZBLC10E14 | ZBLC10E27 | ZBLC10GU10 from our brand Nedis®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/ EU regulation.

The complete Declaration of Conformity (and the safety datasheet if applicable)
can be found and downloaded via:
nedis.com/zblc10e14#support
nedis.com/zblc10e27#support
nedis.com/zblc10gu10#support

ned.is/zblc10e14