1Mii B06T2 Bluetooth 5.3 Transmitter Receiver for TV Headphones User Manual

June 17, 2024
1Mii

1Mii B06T2 Bluetooth 5.3 Transmitter Receiver for TV Headphones

1Mii B06T2 Bluetooth 5.3 Transmitter Receiver for TV
Headphones

In The Box

In The Box

Product Overview

Product Overview

Button Function Operation
Power on Press for about ls
Enter pairing mode Press for a bout 2s
Power off Press for a bout 4s

TX

| Transmitter mode| Slide to TX to enter transmitter mode

RX

| Receiver mode| Slide to RX to  enter receiver mode

0

| Reset| Press for a bout 2s

TX Mode

  1. Flip the mode button to “TX”. Press the button for 2s.When LED light flashes between red and blue ,the adapter will automatically enter into pair mode .
  2. Put your Bluetooth device such as Bluetooth headphones/ earbuds / speaker as close as possible with this adapter.
  3. Turn on your device’s Bluetooth and pair with B06T2 Bluetooth adapter. They will pair automatically.
  4. Connect B06T2 with your Phone / TV / Tablet / PC / Laptop / MP3 / MP4 Projector through 3.5mm jack.
  5. Enjoy the music.
    TX Mode

RX Mode

  1. Flip the mode button to “RX”. Press the button for 2s.When LED light flashes between red and blue ,the adapter will automatically enter into pair mode .
  2. Put your Bluetooth device such as TV /Tablet/PC/Laptop/Phone as close as possible with this adapter
  3. Turn on your device’s Bluetooth and pair with B06T2 named adapter.
  4. Connect B06T2 with your speaker/headphone/through 3.5mm jack.
  5. Enjoy the music.
    RX Mode

Control Function

Control Function
Control Function

How To Enter Pairing Mode?

Press and hold the button for 2 seconds after powered on,B06T2 will enter the pairing mode (LED lights flashing red and blue).

How To Pair The Second Device?

  1. Set B06T2 to pairing mode again (press and hold the button for 2 seconds until the LED flashes red and blue).
  2. Activate the Bluetooth of the second mobile phone, find “B06T2”, click connect, and wait for the pairing to succeed.
  3. Enjoy your music.

Note : You can only play music on one device at a time, so if you want to play music on the second device, you need to pause the music on the first device before playing it on the second device.

Charging Method

  • Plug in the charging cable to charge the B06T2, and the LED will be steady red.
  • When the battery is fully charged, the LED indicator will turn off.

How To Reset The Device?

If B06T2 cannot be connected or does not work normally, please refer to the following methods to reset the device:
Long press RESET button for 2 seconds, the white indicator light flashes 3 times at the same time, then it will enter pairing mode.

CE

YMOO Ltd. hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.
The full test of the EU declaration of conformity is available at the following internet address: www.ymoox.com

In accordance with Article 10 (2) and Article 10 (10), this product is allowed to be used in all EU member states.

ANKBIT INTERNATIONAL LIMITED

ROOM 803, CHEVALIER HOUSE, 45-51 CHATHAM ROAD SOUTH, TSIM SHA TSUI, KOWLOON, HONG KONG

EU Importer:
eVatmaster Consulting GmbH
Bettinastr. 30,60325 Frankfurt am Main.Germany

Warranty

Warranty service is limited to normal use. Any man-made damages such as from connecting to an unsuitable power source, using an unsuitable device, or not following the instructions, as well as damages that did not occur during shipping, repairs, and adjustments not approved by the company, damages from misuse, inattention, or improper installation may cause the warranty to be ineffective immediately. This warranty does not include shipping fees.

Disposal

Always dispose of the used appliance at a recycling centre.
Do not dispose the used appliance together with household waste.

Customer Support

eVatmaster Consulting GmbH Bettinastr. 30
60325 Frankfurt am Main,Germany [email protected]

Manufacturer: Shenzhen Ankbit Electronics Limited Address: Runfeng Industrial Park, No. 4197 Baoan Blvd., Xixiang St., Baoan Dist., Shenzhen, China
Operator: Shenzhen lMii Technologies Limited
Address: Qianhai Complex A201, Qianwan Road 1, Qianhai Shenzhen-Hong Kong Cooperation Zone, Shenzhen, China
We hope you never have the need, but if you do, our service is friendly and hassle-free.
[email protected]
web : www.ymoox.com
FCC ID : 2AUFR-RT5013

Symbols

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

1Mii User Manuals

Related Manuals