nedis HPBT1202BK Over Ear Headphones User Guide

: June 17, 2024
: nedis

nedis HPBT1202BK Over Ear Headphones

nedis-HPBT1202BK-Over-Ear-Headphones-product

Specifications

Power input: Up to 7 hours
Supported Assistants: Siri, Google Assistant
Battery life: Up to 2 hours
Bluetooth version: 5.1
Frequency range: 2402 – 2480 MHz
Bluetooth power: 0 dBm
Audio frequency response: 20 Hz – 20 KHz
Driver size: 40mm
Impedance: 32 ohms
Battery capacity: 200 mAh
Charging port: Micro USB
Other ports: MicroSD card, 3.5 mm
Input voltage: 5.0 VDC; 0.2A

Product Usage Instructions

Intended Use

The Over-Ear headphones HPBT1202BK are designed for wireless audio listening and hands-free calling with supported voice assistants like Siri and Google Assistant.

Main Parts

Main parts (image A)

nedis-HPBT1202BK-Over-Ear-Headphones-fig-1

Headphones
Micro USB cable
MicroSD card slot
On/off / play / pause button
Multi-function button
Volume down / previous track button
Volume up/next track button
3.5mm input
Microphone
Micro USB port

Safety Instructions

Hearing Safety Warning: Do not listen at high volume levels for long periods to prevent hearing damage.

Charging the Product

Plug the micro USB cable into the micro USB port for charging.

Switching On the Product

Press and hold the on/off / play / pause button for 2 seconds to switch on the product. This activates the pairing mode.

Pairing

If the headphones have been paired with another device before, make sure that device is switched off. The headphones will automatically reconnect when back in range and switched on. The status indicator LED lights up blue to indicate successful pairing.

Volume Control

Use the volume up/down buttons or the previous/next track button to control the volume.

Making Phone Calls

To make phone calls, press the multi-function button once or twice to activate Siri or Google Assistant. Use the microphone for clear communication.

Over-Ear headphones

For more information see the extended manual online: ned.is/hpbt1202bk

Intended use

The Nedis HPBT1202BK are Bluetooth headphones with which you can enjoy music at any time and anywhere.
The product can be paired with any Bluetooth® enabled audio/video device.
The headphones can be used to make phone calls if they are connected to a phone.
The product is intended for indoor use only.
Any modification of the product may have consequences for safety, warranty and proper functioning.

Main parts (image A)

Headphones
Micro USB cable
MicroSD card slot
On/off / play / pause button
Multi-function button
Volume down / previous track button
Volume up / next track button
3.5 mm input
Microphone
Micro USB port
LED indicator

Safety instructions

Icon Description
Indication to explain that the product can cause hearing damage. Do not listen at high volume levels for long periods.

WARNING

Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep the packaging and this document for future reference.
Only use the product as described in this document.
Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
Do not drop the product and avoid bumping.
This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
Do not expose the product to water or moisture.
Using headphones with both ears covered while participating in traffic is discouraged and may be illegal in some areas.
The product is delivered with a partially charged battery. For optimal battery life, fully charge the battery before first use.
Some wireless products may interfere with implantable medical devices and other medical equipment, such as pacemakers, cochlear implants and hearing aids. Consult the manufacturer of your medical equipment for more information.
Do not use the product at locations where the use of wireless devices is prohibited due to potential interference with other electronic devices, which may cause safety hazards.
Only use the provided USB charging cable.
Do not leave the product on prolonged charge when not in use.
This product is equipped with a non-removable internal battery. Do not attempt to replace the battery yourself.
During charging, the battery must be placed in a well-ventilated area.
The charger must only be plugged into an earthed socket-outlet.
Only power the product with the voltage corresponding to the markings on the product.
Children of less than 8 years should be kept away.

Charging the product

Plug the micro USB cable A2 into the micro USB port Aq.

Switching on the product

Press and hold the on/off / play / pause button A4 for 2 seconds to switch on the product.

Pairing the headphones to a Bluetooth® audio source

Switch on the product to activate pairing mode. The indicator LED Aw flashes quickly to indicate pairing mode is active.
Activate Bluetooth® on your audio source and connect with the product (HPBT1202BK).
If the headphones have been paired with another device before, make sure that device is switched off.
If the headphones lose connection to the Bluetooth® source, they will automatically reconnect when back in range and switched on
The status indicator LED Aw lights up blue to indicate pairing is successful.

Controlling the music

Press and hold the volume up / next track button A7 for 1 second to skip to the next track.
Press and hold the volume down / previous track button A6 for 1 second to replay the previous track.
Press the on/off / play / pause button A4 to play or pause the music.

Controlling the volume

Press the volume up / next track button A7 or the volume down / previous track button A6 to control the volume.

Making phone calls

The headphones can be used to make phone calls if they are connected to a phone.
Press the multi-function button A5 to answer a call.
Press the multi-function button A5 during a call to hang up.
Press the multi-function button A5 twice to redial the number that was last dialed.
Press and hold the multi-function button A5 to reject a call.

Using a voice assistant

Press the on/off / play / pause button A4 for 1 second to launch Siri/Google Assistant.

Switching off the product

Press and hold the on/off / play / pause button A4 for 5 seconds to switch off the product.

Declaration of Conformity

We, Nedis B.V. declare as manufacturer that the product HPBT1202BK from our brand Nedis®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation.
The complete Declaration of Conformity (and the safety datasheet if applicable) can be found and downloaded via: nedis.com/HPBT1202BK#support

FAQ

Where can I find the complete Declaration of Conformity?

The complete Declaration of Conformity and safety datasheet, if applicable, can be found and downloaded via the support page at nedis.com/HPBT1202BK#support.