Nedis HPBT2261BK Over Ear Headphones User Guide

: June 17, 2024
: nedis

Table of Contents

Nedis HPBT2261BK Over-Ear Headphones
Product Information
Product Usage Instructions
Specifications
Intended use
Main parts
Safety instructions
Charging the product
Using voice assistant
Declaration of Conformity
Documents / Resources

Nedis HPBT2261BK Over-Ear Headphones

Nedis-HPBT2261BK-Over-Ear-Headphones-PRODUCT

Specifications

Product: Over-Ear headphones HPBT2261BK
Article number: HPBT2261BK
Max. playtime (at 50% volume): Up to 16 hours
Power input: Up to 12 hours with ANC
Noise Cancelling: Up to 20 dB
Voice Assistants: Siri, Google Assistant
Charging time: Up to 2 hours
Bluetooth version: 5.0
Frequency range: 2402 – 2480 MHz
Transmission power: 0 dBm
Frequency response: 20 Hz – 20 KHz
Driver size: 40 mm
Battery capacity: 300 mAh
Charging port: USB Type-C™
Audio input: 3.5 mm
Input voltage/current: 5.0 VDC; 0.3 A

Product Information

The Over-Ear headphones HPBT2261BK provide up to 16 hours of playtime with noise-canceling functionality of up to 20 dB.
They are equipped with a built-in microphone, LED indicator, and support voice assistants like Siri and Google Assistant.

Product Usage Instructions

Safety Instructions

WARNING: Do not listen at high volume levels for long periods to avoid hearing damage.

Charging the Product

Plug the USB-C cable into the USB-C port on the headphones.
Connect the other end of the USB-C cable to a computer or power adapter.
The LED indicator will turn red while charging and switch off when fully charged.

Switching On the Product

Press and hold the multi-function button for 3 seconds to switch on the headphones.

Pairing the Headphones to a Bluetooth Audio Source

Follow the instructions for your specific device to pair the headphones via Bluetooth.

Controlling Volume

Use the volume up / next track button or volume down / previous track button to adjust the volume.

Switching On ANC (Active Noise Cancelling)

Slide the ANC switch to the on position to activate noise cancelling.

Making a Call

You can make a call using the headphones by dialing from your connected device.

Using Voice Assistant

Press the Multi-function button for 1 second to launch Siri or Google Assistant.

Switching Off the Product

To turn off the headphones, press and hold the Multi-function button for 3 seconds.

Declaration of Conformity

The complete Declaration of Conformity and safety data sheet can be found and downloaded at nedis.com/hpbt2261bk#support.

FAQ

Q: How do I know if my headphones are fully charged?

A: The indicator LED will switch off when the battery is fully charged.

Q: Can I use voice assistants with these headphones?

A: Yes, you can use Siri or Google Assistant with these headphones by pressing the Multi-function button.

Specifications

Product	Over-Ear headphones
Article number	HPBT2261BK
Max. playtime (at 50 % volume)	Up to 16 hours

Up to 12 hours with ANC

Over-Ear headphones

For more information see the extended manual online: ned. is/hpbt2261bk

Intended use

The Nedis HPBT2261BK are Bluetooth headphones with which you can enjoy music at any time and anywhere.
This product can be paired with any Bluetooth® enabled audio/video device.
The headphones can be used to make phone calls if they are connected to a phone.
The product is intended for indoor use only.
Any modification of the product may have consequences for safety, warranty, and proper functioning.

Main parts

(image A)

headphones
Volume up / next track button
Multi-function button
Volume down / previous track button
Noise cancelling switch
USB-C charging port
3.5 mm input
Microphone
LED indicator
USB-C cable

Safety instructions

Icon Description

Indication to explain that the product can cause hearing damage.
Do not listen at high volume levels for long periods.

WARNING

Ensure you have fully read and understood the instructions in this document before you install or use the product.
Keep the packaging and this document for future reference.
Only use the product as described in this document.
Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
Do not drop the product and avoid bumping.
This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
Do not expose the product to water or moisture.
Using headphones with both ears covered while participating in traffic is discouraged and may be illegal in some areas.
The product is delivered with a partially charged battery. For optimal battery life, fully charge the battery before first use.
Some wireless products may interfere with implantable medical devices and other medical equipment, such as pacemakers, cochlear implants, and hearing aids.
Consult the manufacturer of your medical equipment for more information.
Do not use the product at locations where the use of wireless devices is prohibited due to potential interference with other electronic devices, which may cause safety hazards.
Only use the provided USB charging cable.
Do not dismantle, open, or shred secondary cells or batteries.
This product is equipped with a non-removable internal battery. Do not attempt to replace the battery yourself.
During charging, the battery must be placed in a well-ventilated area.
The charger must only be plugged into an earthed socket outlet.
Only power the product with the voltage corresponding to the markings on the product.
Children of less than 8 years should be kept away.
Cleaning and user maintenance shall not be done by children without supervision.
Do not leave a battery on prolonged charge when not in use.

Charging the product

Plug the USB-C cable Aq into the USB-C port A6.
Plug the other end of the USB-C cable Aq into a computer or power adapter.
- The indicator LED A9 lights up red when the battery is charging.
- The indicator LED A9 switches off when the battery is fully charged.

Switching on the product

Press and hold the multi-function button A3 for 3 seconds to switch on the product.

Pairing the headphones to a Bluetooth audio source

Switch on the product to activate pairing mode.
- The indicator LED A9 flashes red and blue to indicate pairing mode is active.
Activate Bluetooth® on your audio source and connect with the product (HPBT2261BK).
The indicator LED A9 flashes slowly to indicate pairing is successful.
Play music from a Bluetooth® connected audio source.

Controlling the music

Press and hold the volume up / next track button A2 for 2 seconds to skip to the next track.
Press and hold the volume down / previous track button A4 for 2 seconds to replay the previous track.
Press the power multi-function button A3 to play or pause the music.

Controlling the volume

Press the volume up / next track button A2 or the volume down / previous track button A4 to control the volume.

Switching on ANC (active noise canceling)

Slide the ANC switch A5 to “on” to switch on ANC (active noise canceling).

Making a call

The headphones can be used to make phone calls if they are connected to a phone.
Press the Multi-function button A3 to answer a call.
Press the multi-function button A3 twice to reject a call.
Press the multi-function button A3 during a call to hang up.
Press the multi-function button A3 three times to redial the number that was last dialed.

Using voice assistant

Press the Multi-function button A3 for 1 second to launch Siri/Google Assistant.

Switching off the product

Press and hold the Multi-function button A3 for 3 seconds to switch off the product.

Declaration of Conformity

We, Nedis B.V. declare as manufacturer that the product HPBT2261BK from our brand Nedis®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully.
This includes, but is not limited to the RED 2014/53/EU regulation.
The complete Declaration of Conformity (and the safety data sheet if applicable) can be found and downloaded via: nedis.com/hpbt2261bk#support
ned.is/hpbt2261bk