Shopify TP-02 Solar Balcony Tripod Instruction Manual
- June 17, 2024
- shopify
Table of Contents
Solar Balcony Tripod
Installation Manual
Preparation
1.1 Safety
Please use the following tools and pay attention to safety during
construction 1.2 Tools
Outer hexagonal bolt | Type of sleeve: | Inner hexagonal bolt | Type of sleeve: |
---|---|---|---|
M8 | 6mm hexagon wrench | ||
If there is another type of bolt, please use other sleeve
1.3 Solar Accessories
Installation
2.1: Open the pre-installed tripod and lock it with M820 hex bolts.
2.2: Solar Panel Installation
Align the holes in the frame of the solar panel with the holes in the tripod
and secure the solar panel using M820 hex bolts. Each solar panel uses 4
bolts. 2.3: Rail Installation.
2.3.1: The two rails are fastened together using rail splice. Take the center
line of the rail splice as the standard, insert two rails, and lock the
bolts.a2.3.2: Use M8*25 hex bolts to fix the rail
on the tripod.2.4: Use M8 U-bolts to fix the tripod to the
guardrail.
Installation Complete.
Other suggestions:
A marker can be used to mark the place with a lock bolt for reference in
subsequent maintenance. If the mark position changes, it needs to be locked
again. If there is no change, keep it still. As shown below: