shopify 3pro Siren Marine wiring cable User Guide
- June 5, 2024
- shopify
Table of Contents
Siren Marine: Wiring Cable 1 (Harness 1)
User Guide
Installation Instructions:
- Attach the wiring Cable 1 connector to the device Harness 1 connecter by aligning the keyway, then screw together tightly.
- Connect the ground (-) wire (black) on the wiring cable to a battery negative post or common ground.
- Connect the power (+) wire (red) on the wiring cable to a +9VDC to +30VDC battery positive post or constant +9VDC to +30VDC power source.
- Connect selected wired sensors using Posi-Tap? connectors, terminal block, or another connection type.
Cable Length: 36 in (914.4 mm)
Wire Length : 6 in (152.4mm)
| Wire Color | Input/Output | Function |
|---|---|---|
| Red | Input | Battery 1 |
+9VDC to +30VDC
Brown| Input| Battery 2
+9VDC to +30VDC
Gray| Input| Remote Arm/Disarm
Black| Input| DC Common Ground
Yellow| Input| High Water 1
Pink| Input| Security 1
Dark Green| Input| Ignition/Engine Hours
White| Output| Relay Control 2
Blue| Output| Blue Sea Battery Switch (#7713)
Purple| Output| Relay Control 1
Orange| Input| Battery Switch ON/OFF /Hardwired Bilge Pump
Light Green| Input| Shore Power
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>