Shopify 1224H Digital Alarm Clock User Guide

Shopify 1224H Digital Alarm Clock User Guide

1. Dual alarm clock:

2. Switch the alarm clock: short press the alarm key to display the alarm clock 1 pattern and alarm status, then press the alarm key to display the alarm clock 2 pattern and alarm status, press the +/- key to set the alarm OFF/ON, and then press the S key to enter the corresponding group Alarm setting.

3. Turn off the alarm clock: When the alarm clock rings, press and hold the SNOOZE button for 3 seconds to turn off the current alarm clock and enter the next alarm clock state. Short press any key to start snooze.

4. Support to set Monday to Sunday/Monday to Saturday/Monday to Friday Alarm Clock.

5. Voice-activated wake-up:
   Voice-activated wake-up in battery mode
   Voice control: clap your hands or knock on the table to wake up the alarm clock.

6. Five gear brightness adjustment:
   In the time state, short press the SNOOZE button, the brightness will be set in cycles from 1 to 5.

7. Night Mode:
   22:00-6:00 Brightness automatically enters low brightness mode

8. Two display modes:
   Press and hold the + button for 3 seconds to switch the display mode:

9. Only the time is displayed.

10. Cycle display of time, date and temperature.

11. Anti-disturb Funtion at Night:
    In the time state, press and hold the SNOOZE button for 3 seconds to enter the do not disturb mode, turn off the display, turn off the voice-activated wake- up, and only manually press the button to wake up the screen

12. Display toggle:

13. 12/24H display switching: long press the S key, 12/24H display can be switched by +/- .

14. Celsius/Fahrenheit display switching: in time state, press and hold the – key for 3 seconds to switch the temperature Fahrenheit/Fahrenheit display.

Function introduction

• 4-digit LED display.
• Clock function: displays hours and minutes, and can realize 12/24 hour format conversion. Date function: display “month”, “day”, “year” (from 2022 to 2121).
• Alarm clock function: set daily alarm and snooze, two sets of alarms
• Temperature function: can display Fahrenheit or Celsius temperature and switch. Normal measurement range -10°C~50°C (14F~122’F).
• Display mode selection: in temperature mode, long press the MODE key to switch the display mode. The display mode will not be switched by default after power-on.
• Brightness adjustment function: Press the up button to adjust the brightness to two levels. Automatic half bright function: the brightness automatically dims from 18:00-6:00, and the automatic half bright interval can be set. Voice control function: Only when the dry battery is powered, the display can be turned on by voice control, and the screen will automatically turn off after 15 seconds.
• When powered by 3 dry batteries and 4.5V: the screen turns on for 15 seconds and then goes off. Press any button to light up the display; when powered by DC5V, the screen stays on.

Key Function

Instructions

Alter posting m, the LED will the fuly displayed for about 2 sms and thermal clock mode Default 2023 11, 122-00, петра playe

Note

1. All setting contents will flash when setting.

2. During setting, if there is no key operation within 1 minute, it will automatically return to the state before setting.

3. Time is not set, date is not set, temperature mode, single press to adjust two levels of brightness

4. When any alarm reaches the time, it will automatically return to the alarm mode and make a beeping sound while the alarm symbol flashes. At this time, any key (except the snooze key) will stop the alarm., none
   If the button is pressed for 1 minute, the alarm will stop sounding and the alarm will not enter snooze, but the alarm mark will not disappear.

5. When the alarm is ringing, press sNooze to pause the alarm and enable snooze once, and the corresponding alarm symbol will flash; during the snooze period, press any key (except the snooze key) to exit snooze.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>