Smart Life C6401-B Smart Wi-Fi Christmas LED String Lights User Guide
- June 16, 2024
- Smart Life
Table of Contents
Smart Life C6401-B Smart Wi-Fi Christmas LED String Lights
Product Information
Model : C6401-B
Download Free APP: Smart Life
Supported Platforms:
- App Store (iOS)
- Google Play (Android)
Specifications
- C015 Controller: 1
- Remote Control: 1
- Waterproof Power Supply (12V/3A): 1
- Wall Plug (UL, IP44): 1
- Christmas LED String Lights (100 pixels): 1
- Copy of the Manual: 1
- After Sales Service Card: 1
- Total Lights: 100pcs
- Length: 12870mm (42.22ft)
Product Usage Instructions
Button Instruction
Switch: Short press to turn on/off. Long press for 5 seconds to reset to pairing mode (light will blink in red).
APP Intelligent Operation Introduction
The Smart Life app provides various features and controls for the C6401-B LED String Lights:
- Add color with one click
- Add color individually
- Erase Color
- Add points
- Color light and white light adjustment
- Brightness adjustment in static mode
- Custom mode for creating favorite color scenes
- Collection mode for saving and deleting dynamic scenes
- Select different scene types from a scene list
- Color adjustment with color dial
- Switching between local microphone mode and mobile music mode
- Different music scenes and sensitivity modulation
- Set name for DIY mode
- Supports gradient, jump, breathing, flashing, flowing water, rainbow, and other DIY modes
- Brightness adjustment with slider
- Add favorite colors
- Intact mode to set the lamp to one color
- Section mode to divide the light into multiple segments and set them to different colors
Pairing Instruction
Follow these steps to pair the C6401-B LED String Lights with the Smart Life app:
- Download the Smart Life app from Google Play or App Store.
- Log in with an existing account or sign up for a new account.
- Power on the device and make sure it is blinking rapidly in white.
- Turn on the Bluetooth and Wi-Fi of your phone. Ensure that your phone is connected to a 2.4GHz Wi-Fi router.
- In the Smart Life app, tap on “Add Device” or the plus icon (+) in the top-right corner of the Home page.
- Select the C6401-B device.
- Enter the Wi-Fi password and click “Next”. Make sure the Wi-Fi is 2.4GHz, not 5GHz.
- Wait for about twenty seconds for the device to be added completely.
- The device will now appear on the home page of the app, and you can start using it.
FAQ
- Q: What Wi-Fi frequency should I use during pairing?
- A: The C6401-B LED String Lights require a 2.4GHz Wi-Fi frequency. Make sure your phone is connected to a 2.4GHz Wi-Fi router during the pairing process.
- Q: What should I do if the connection times out or the network connection cannot be reached?
- A: If the connection times out or you cannot reach the network connection, please try reconnecting to a strong signal location.
Thank you for choosing the C6401-B. In order to optimize the user experience, please read this manual carefully before operation, and keep this manual properly for future use.
Warning
- This product is not a toy. To avoid fire, burns, personal injury or electric shock, please install out of the reach of children.
- In order to ensure the normal operation of the lamp, please use the voltage indicated on the package.
- Please do not modify the lamps during the warranty period.
- Do not install gas or electric heaters, fires, candles or any dangerous objects.
- Before installation, please check whether the lamps and various parts are in good condition.
- Be sure to cut off the power before installation.
- Do not expose the lamp to corrosive conditions.
- If the power cord is damaged, please cut off the power immediately and stop using it
Technical Data
- Connection method: 2.4G Wifi&Bluetooth Control method: APP/Voice/Button
- Adapter input voltage:100-240VAC
- Adapter output voltage: 12VDC/3A
- Rated working voltage: DC12V
- Rated power: 30W
- Lamp color: RGB
- Memory function: yes
- Working temperature: -20℃~+40℃
- Controller levels of protection: IP20
- Lamps levels of protection: IP65
Work with Amazon Alexa and Google Assistant.
Packing List
- C015 Controller * 1
- Remote Control * 1
- Waterproof power supply 12V/3A wall plug horizontal American standard UL (IP44) 1 hristmas LED String Lights (100 pixels)
- Copy of the manual * 1
- After sales service card * 1
Manual instruction
Button Instruction
Switch: Short press is on/off. When the device is on, long press in 5 seconds is reset to pairing mode. Light will blink in red.
Product wiring diagram
Size
APP Intelligent operation introduction
Pairing Instruction
APP Download. Search the Smart Life from Google Play or App Store.
- You can also scan the QR code from below. Download the APP and Log In with the existing account or Sign Up the new account.
- Power on the device, and confirm the device is blinking rapidly in white. Turn on the Bluetooth and Wi-Fi of the phone. Please make sure the phone is connecting the 2.4GHz Wi-Fi router.
- Tap Add Device or the plus icon (+) in the top-right corner on the Home page to go to the device adding page.
- Enter the Wi-Fi password and click Next. Make sure the Wi-Fi is 2.4GHz not the 5GHz. Because the Wi-Fi chip is 2.4GHz. Wait about twenty seconds and the device will be added completely.
- Then the device can be found in home page. Now you can play it with your imagination. 6.Click the edit icon in the upper right corner to show more gameplay.
Notice
- Please make sure to perform network pairing in 2.4G wifi or hotspot mode;
- If the connection times out or the network connection cannot be reached, please reconnect to a strong signal location.
Bluetooth Control Step
Note: The device has already joined my app normally (2.4GWIFI+Blue-tooth is required for the first connection), Bluetooth control is generally used for devices with poor WIFI signals or disconnected network connections;
- Turn off the phone’s WiFi;
- Turn on Bluetooth and open the device on the APP; Then the device can be controlled through Bluetooth;
Common Problems and Solutions
- Unable to connect to your Wi-Fi network.
- Please ensure that the correct Wi-Fi password is entered during use.
- Ensure that the connection is 2.4G wifi and that the device currently does not support 5G wifi,
- Check if there are any issues with your internet connection. If the Wi-Fi signal is too weak, please move to a place with a strong signal or reset the wireless router and try again.
- The installer is not working properly.
- Then close all applications running in the background and reopen the Smart Life APP.
- Uninstall and reinstall the Smart Life app and repeat.
- The smart string light is not responding.
- Check whether the smart string light is turned off. If yes, turn them on and wait until the smart light strip reconnects to The wireless network works automatically.
- Check if there is any problem with your internet connection. If necessary, reset the wireless router and try again.
Guarantee
- During the warranty period, we provide services including refunds or free replacement for those who use the device for its intended purpose.
- This warranty does not include:
- Malfunction or damage caused by improper use, repair or modification.
- Failure or damage due to falling.
- Failure or damage caused by fire, earthquake, flood, lightning and other natural disasters.
- Malfunction or damage when used other than for its intended purpose.
- Failure or damage caused by third-party products.
- Failure or damage to the product caused by human factors
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- this device must accept any interference received, including interfer-ence that may cause undesired operation.
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following.
Measures
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Note The Grantee is not responsible for any changes or modifications not
expressly approved by the party responsible for compliance. such modifi-
cations could void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement. To
maintain compliance with FCC’s RF exposure guidelines, the distance must be at
least 20 cm between the radiator and your body, and fully supported by the
operating and installation configurations of the transmitter and its
antenna(s). Made in China
Documents / Resources
|
Smart Life C6401-B Smart Wi-Fi Christmas LED String
Lights
[pdf] User Guide
C6401A, 2A7VPC6401A, C6401-B Smart Wi-Fi Christmas LED String Lights, C6401-B,
Smart Wi-Fi Christmas LED String Lights, Wi-Fi Christmas LED String Lights,
Christmas LED String Lights, LED String Lights, String Lights, Lights
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>