WINCHESTER Divan Bed Set Instruction Manual
- July 26, 2024
- Winchester
Table of Contents
WINCHESTER Divan Bed Set
Product Information
Step 1: Removing Drawer Straps
Firstly, please make sure to open your packaging and assemble your divan in a clean and safe environment as you can mark or damage your items otherwise. If you have purchased drawers with your divan then follow the below instructions. If you do not have drawers, move on to Step 2.
Drawer retaining straps ensure your drawers do not slide open during transit. They are stapled on the inside of the divan. You can either carefully release the straps from the fastening point or simply cut them away as detailed in the image below. Maximum drawer weight is 15kg. Do not overload the drawers. Your fittings are usually stored inside the drawers, remove them. Now follow Step 2.
- Cut strap to release the drawer
- Cut remaining strap to desired length
Step 2: Assembling Divan Castors/Feet
Turn the divan base over so the underside is accessible. Gently push the castors or divan feet into the pre-drilled holes and gently tap them into place. There may be some fabric cover the holes, use a screw driver or the socket on the wheel to puncture through the fabric. Use a rubber mallet if required.
Please do not use excessive force. When all castors/feet have been fitted to all the corners of both divan bases securely. Now follow Step 3.
Step 3: Attaching Divan Clips
If you have a 2FT6 or 3FT divan then go to Step 3. If you have a 4FT, 4FT6, 5FT or 6FT divan then follow this step. Locate your suitable location for your divan clips. Carefully peel back the dust sheet place the clips over both divan edges. Gently push the clips into place. If you find it easier, you can put the divan bases on their side to attach the clips.
When all divan clips have been fitted, ask a friend or family member to assist you. Carefully lift both halves together and turn it over on to its feet. Now follow Step 4.
Step 4: Attaching the Headboard
Firstly, decide which end of the bed is to be used for a headboard. Place the headboard bolt into the hole and fasten into place. Then get your 2 headboard struts and screw them in to the headboard with the headboard screws provided.
Stickers on the divan should show you where the holes are, if these have come off in transit feel the fabric and you can locate them. Now lower the headboard into position before fully tightening the bolt (bolt/washer cap may vary). Now you can put your mattress on the divan, make sure that your headboard sits above the mattress.
Specifications
| Component | Details |
|---|---|
| Drawer Weight Limit | 15kg |
| Tools Required | Screwdriver, Rubber Mallet |
| Divan Sizes | 2FT6, 3FT, 4FT, 4FT6, 5FT, 6FT |
FAQs
Q: What should I do if I don’t have drawers with my divan?
**A:** If you do not have drawers, you can skip Step 1 and move directly to Step 2.Q: How do I know where to attach the headboard?
**A:** Stickers on the divan should show you where the holes are. If the stickers have come off in transit, feel the fabric to locate the holes.Q: What tools do I need for assembling the divan?
**A:** You will need a screwdriver and a rubber mallet.Q: Can I assemble the divan alone?
**A:** It is recommended to ask a friend or family member to assist you, especially when lifting and turning the divan bases.