UNIVERSAL HARDWARE 5304530067 Smart Choice 8-Foot Semi-Rigid Dryer Vent Kit Instructions
- June 9, 2024
- UNIVERSAL HARDWARE
Table of Contents
UNIVERSAL HARDWARE 5304530067 Smart Choice 8-Foot Semi-Rigid Dryer Vent
Kit
INSTRUCTION
IMPORTANT
- Read your dryer manufacturer’s use & care guide and installation instructions before installing.
- Follow all dryer manufacturer instructions. Refer installation questions to your dryer manufacturer or a qualified professional installer. Dryer manufacturers specify metal venting.
- Poor performance, increased drying times and lint build-up can result if duct is too long or crushed. Clear all existing venting of lint prior to installing new venting.
- Measure the distance between the dryer exhaust pipe and the vent tailpipe. Add 12” for every 90˚angle.
- Using both hands, stretch the semi-rigid duct evenly to the length measured.
Dryer Connection
- Place the clamp on the duct. Fit the duct over the dryer exhaust pipe. Position the clamp so it covers both the slot in the duct and the dryer exhaust pipe. Tighten the clamp.
Wall Connection
- Place the clamp on the duct. Fit the duct over the vent tailpipe. Position the clamp so it covers both the slot in the duct and the vent tailpipe. Tighten the clamp.
- After installation, turn on the dryer and check outside the vent hood to ensure it is clear and functioning properly.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>