i-tec C31NANOHDM2D112W USB-C Metal Nano 2x Display Docking Station User Guide

: June 17, 2024
: i-tec

Table of Contents

i-tec C31NANOHDM2D112W USB-C Metal Nano 2x Display Docking Station
DESCRIPTION
SPECIFICATIONS
SYSTEM REQUIREMENTS
INSTALLING DRIVERS
SAFETY INSTRUCTIONS FOR USING THE DOCKING STATION
FCC COMPLIANCE STATEMENT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

i-tec C31NANOHDM2D112W USB-C Metal Nano 2x Display Docking Station

i-tec-C31NANOHDM2D112W-USB-C-Metal-Nano-2x-Display-Docking-Station-
product

Specifications

Model: C31NANOHDM2DOCPD
Power Delivery: 100W
Front Panel:
- 2x USB 2.0 ports
- 2x USB 3.2 Gen.1 port
Back Panel:
- 1x USB-C (PD) port
- 1x USB-C 3.2 Gen.1 port
- 2x HDMI port
Side Panel:
- 1x Ethernet GLAN RJ-45 port (RTL8153B)

System Requirements

Operating system:

Windows 7/8/8.1/10 (32/64 bit)
macOS
iPadOS
Android devices with DEX and Easy Projection extensions

Installing Drivers

Windows: Only if a problem is detected with the LAN adapter, eg: In case of outages, slow network, and in case of poor or no LAN detection. You can download LAN drivers here in the Manuals, Drivers section.

macOS: No driver installation is required.

Safety Instructions for Using the Docking Station:

Please read the safety instructions provided in the user manual.

Product Usage:

Step 1: Connecting Devices

Connect your docking station to your computer using the USB-C port.
Connect your peripherals (eg, USB devices, HDMI monitors) to the corresponding ports on the docking station.
If using a Windows system, install LAN drivers if necessary (refer to the Installing Drivers section).

Step 2: Power Delivery

If your device supports USB-C Power Delivery, connect it to the USB-C (PD) port on the docking station to charge your device.

Step 3: Display Configuration

To configure the display settings, follow these steps:

On your computer, go to the display settings.
Select the desired resolution and display mode (extended or mirrored).
Apply the changes and your displays should be configured accordingly.

Frequently Asked Questions (FAQ):

For frequently asked questions about this product, please visit our website www-i-tec.pro under the FAQ section for this product.

Please read the entire instruction manual carefully. A detailed manual is available on our website

www.i-tec.cz/en

in the tab „Manuals, drivers“. In case of any issues, please contact our technical support at:

support@itecproduct.com

DESCRIPTION

Front panel:

1. 2x USB 2.0 port
2. 2x USB 3.2 Gen.1 port

Back panel:

3. 1x USB-C (PD) port
4. 1x USB-C 3.2 Gen.1 port
5. 2x HDMI port

Side panel:

6. 1x Ethernet GLAN RJ-45 port (RTL8153B)

SPECIFICATIONS

Integrated 30cm USB-C cable for connecting to devices
Docking station technology: USB-C (MST)
Power Delivery: 100W
Internal power consumption: 5-10W
Video Ports:
- 2x HDMI

Resolution:

Host device with DisplayPort 1.2 support:
- 1 monitor – 1x HDMI → up to 4K/30Hz
- 1 monitor – 1x HDMI → up to 1080p/120Hz
- 2 monitors – 2x HDMI → up to 2x 1080p/60Hz*
Host device with DisplayPort 1.4 support:
- 1 monitor – 1x HDMI → up to 4K/60Hz
- 2 monitors – 2x HDMI → up to 2x 1440p/60Hz*
DisplayPort 1.4 host device with DSC support:
- 1 monitor – 1x HDMI → up to 4K/60Hz
- 2 monitors – 2x HDMI → up to 2x 4K/60Hz*
- 2 monitors – 2x HDMI → up to 2x 1440p/144Hz*
2x USB 3.2 Gen.1 port
2x USB 2.0 port
1x USB-C 3.2 Gen.1 port
1x USB-C port PD (power delivery only)
1x Ethernet GLAN RJ-45 port (RTL8153B)
MAC address cloning: yes (using i-tec Docker Pro software)
VOL: S1, S2, S3
Product dimensions: 152.5 x 43 x 15 mm
Product weight: 92 g
Package dimensions: 112 x 233 x 23 mm
Package weight: 115 g

SYSTEM REQUIREMENTS

Hardware requirements:

Devices with a free USB-C, USB4 or Thunderbolt™ 3/4 port

Requirements for the Power Delivery function:

Devices with a free USB-C, USB4 or Thunderbolt™ 3/4 port with Power Delivery support

Video output requirements:

Devices with a free USB-C or USB4 port with DisplayPort Alternate Mode support or Thunderbolt™ 3/4 port

Operating system:

Windows 10 / 11, macOS*, iPadOS, Android, Chrome OS and Linux with the latest updates
macOS does not support Multi-Stream Transport (MST) technology. Connecting two monitors to a macOS station will cause both monitors to display the same image.
iPadOS, and Android systems do not support multi-screen image transfer technology or the expanded screen option. This means that only the mirrored screen will be displayed when connected to an external monitor. (Not valid for Android devices with DEX and Easy Projection extensions).

INSTALLING DRIVERS

Windows:
Only if a problem is detected with the LAN adapter, e.g.: In case of outages, slow network and in case of poor or no LAN detection. You can download LAN drivers here in the Manuals, Drivers section

https://i-tec.pro/produkt/c31nanohdm2docpd/

macOS:

No driver installation required

SAFETY INSTRUCTIONS FOR USING THE DOCKING STATION

Do not be exposed to extreme temperatures and humidity.
Use the device on flat pads to avoid slipping and falling on the ground.
Keep the drivers and manual for later use.
Avoid straining the USB-C port or cable.
Restart the product periodically using the ON/OFF button or by unplugging it from the mains.
Do not plug USB-C PD adapters into USB-C ports that are not marked as ports to connect USB-C PD power adapters.
It is recommended that you switch off the docking station at the end of the day. In cooperation with the service department:
Check functionality after falling into water or on the ground.
Verify functionality when the cover is cracked.
Complain about the device not working according to the manual.

FREQUENTLY ASKED QUESTIONS

Available on our website www-i-tec.pro under “FAQ” for this product

GLOSSARY OF TERMS

Interface/port/connector/input/slot – the place where two devices are physically connected.
Controller – a semiconductor component (called a chipset) in a notebook/tablet that ensures the operation of one of the ports.
Thunderbolt™ – is a fast hardware interface that allows you to connect devices (peripherals) to your computer via an expansion bus. Thunderbolt combines PCI-Express and DisplayPort into a serial data interface. It allows daisy chaining of up to 6 additional
Thunderbolt™ devices, with Thunderbolt™ 3/4 transfer rates of up to 40Gbit/s.
USB-C / USB Type-C / USB4 / Thunderbolt™ 3/4 – is a symmetrical connector allows faster charging, power, dual-role (not only host, but also guest), support for alternative modes – Alt Mode (DisplayPort, MHL, Thunderbolt 3, Power Delivery) and error notification via Billboard device.
USB-C Power Delivery (USB-C PD) – an optional feature of the USB-C connector. A connector with this support can both charge and be charged, and supports loads from 10W to 240W
USB 3.2 / 3.1 / 3.0 / 2.0 – standard for USB interface / port for connecting various USB devices. Various USB devices can be connected to the docking station or adapter using
USB Type-A interface. The USB Type B port is used to connect the docking station or adapter to a laptop/tablet.
HDMI/Display Port – A standard for a digital graphics interface/port used to connect monitors and other graphic display devices.
LAN (Local Area Network) – a local computer network, now the most common is the so-called Ethernet, which at the docking station reaches a theoretical transfer rate of up to 2.5 Gbit/s.
Audio – a term for an audio input (microphone) or output device (headphones/speakers)

This equipment is marked with the above recycling symbol. It means that at the end of the life of the equipment you must dispose of it separately at an appropriate collection point and not place it in the normal domestic unsorted waste stream. This wil benefit the environment for all. (European Union only)

EU Declaration of Conformity

The manufacturer declares that this product Product is determined for using in PC as equipment.

We declare under our sole responsibility that the above-named product is in conformity with the following European Union directives:

RoHS:
2011/65/EU; EU 2015/863 and it is safe under conditions of standard application Signed for and on behalf of Executive Name and Signature

FCC COMPLIANCE STATEMENT

This equipment has been tested and found to comply within the limits of a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.