i-tec 8595611700255 USB 2.0 Ethernet Adapter User Guide

: June 4, 2024
: i-tec

Table of Contents

i-tec 8595611700255 USB 2.0 Ethernet Adapter
INTRODUCTION
- FEATURES
- SPECIFICATION
SYSTEM REQUIREMENTS
PRODUCT OVERVIEW
- PACKAGE CONTENT
SAFETY INSTRUCTIONS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

i-tec 8595611700255 USB 2.0 Ethernet Adapter

i-tec -595611700255-USB-2.0-Ethernet-Adapter-product-
image

i-tec -595611700255-USB-2.0-Ethernet-Adapter-02 www.i-tec.cz/en

INTRODUCTION

The USB 2.0 Fast Ethernet Adapter allows user’s computer instantly connect to a 10/100 Mbps network through an existing USB port. No need to purchase an extra network card and share a PCI or Cardbus slot. With compliance with USB 2.0 speciﬁcation, this adapter ensures true 10/100 Mbps network speed without any compromise. Besides, compact and bus-powered design means external power is not required.

FEATURES

USB 2.0 to 10/100 Mbps Fast Ethernet
Support both full-duplex and half-duplex operations
Support Wake-on-LAN function and suspend mode
Powered by USB port only
Plug & Play installation

SPECIFICATION

Ports: USB 2.0 type A Male and RJ-45 for Fast Ethernet cable
LED indicators: Green, Yellow
Chipset Asix AX88772B with SRAM for RX/TX packet buffering
Power: USB Bus Power 5V
Housing from PVC
Supported OS : Windows 7 / 8 / 8.1 / 10, macOS
Operation Temperature: 0-70°C
Storage Temperature: -10-80°C
Size (L x W x H): 66 x 22 x 15 mm
Weight: 24 g
Compliance: CE, FCC

SYSTEM REQUIREMENTS

Windows 7 / 8 / 8.1 / 10, macOS 10.6 and higher
macOS 10.6-10.9 (macOS 11.0 – 11.2 not supported)
Free USB port (USB 3.0/2.0/1.1)

PRODUCT OVERVIEW

Act/Link LED (Green)
Light green: Data is link.
RJ45 connector
Act/Link LED (Yellow)
Yellow ﬂashing: Data is transmitting.
USB Type-A connector

DRIVER INSTALLATION
Note: DO NOT connect the Ethernet adapter to your computer before completing the installation of driver.

The descriptions of driver installation shown here is an example. The actual strings and screen shots may vary slightly on each operating system.
The driver version is subject to change due to the driver updated.

PACKAGE CONTENT

i-tec USB 2.0 Fast Ethernet Adapter
User Guide

SAFETY INSTRUCTIONS

Do not expose to extreme temperatures and air humidity.
Use the device on ﬂat surfaces – you will prevent it from slipping and falling to the ground.
Save the user manual for a possible use later.

In cooperation with the service department:

Check functionality after falling to water or to the ground.
Check functionality when the cover is broken.
Send the device back if it does not work in accordance with the user manual.

FREQUENTLY ASKED QUESTIONS
Available on our website www.i-tec.cz/en/ on the “FAQ” tab of this product.

FCC COMPLIANCE STATEMENT
This equipment has been tested and found to comply within the limits of a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.