M5STACK CoreMP135 Twitter Hashtag User Manual
- June 2, 2024
- M5STACK
Table of Contents
M5STACK CoreMP135 Twitter Hashtag
PRODUCT INFORMATION
Specifications
- Processor and Performance: Processor Model: STM32MP135DAE7, featuring a single-core ARM Cortex-A7 architecture. Clock Frequency: Up to 1GHz, providing high processing performance.
- Memory: RAM: 1GB of RAM for storing runtime data and programs.
- Manufacturer: M5Stack Technology Co., Ltd
- Address: 5F, Tangwei Stock Commercial Building, Youli Road, Bao’an District, Shenzhen, Guangdong,China
FAQ
- Q: What should I do if the device is not responding?
- A: If the device is not responding, try resetting it by power cycling or contacting customer support for further assistance.
- Q: Can I upgrade the RAM on CoreMP135?
- A: The RAM on CoreMP135 is not user-upgradable as it is integrated into the device’s hardware.
OUTLINE
CoreMP135 is a linux platform host based on the stm32mp135 series of chips. Main control STM32MP135DAE7, single-core ARM cortex-A7 high-performance processor, memory 1G, the main frequency up to 1GHz. It can be used independently or in combination with the M5 bus expansion board. Rich product interface, stable chip operation, cheap, with openWRT, Debian and other systems, especially suitable for industrial edge gateway, smart home, industrial automation, Internet of things edge control gateway, robot motion control center and other aspects. With the M5’s rich array of sensors and actuators, you can quickly and easily build fully intelligent automation.
CoreMP135
- Communication Capabilities: 1.
- Gigabit Ethernet: CoreMP135 provides two Gigabit Ethernet interfaces, supporting the 1000BASE-T and 100BASE-T standards.
- USB Interfaces: It includes two USB 2.0 Type-A interfaces and one USB 2.0 OTG Type-C interface, catering to the needs of USB devices and host mode.
- CAN Interfaces: Two CAN interfaces are available, suitable for Controller AreaNetwork (CAN) applications.
- I2C Interfaces: CoreMP135 offers two I2C interfaces, supporting serial communication protocols.
- UART Interfaces: Equipped with two UART interfaces for serial communication.
- Processor and Performance: 2.
- Processor Model: STM32MP135DAE7, featuring a single-core ARM Cortex-A7 architecture.
- Clock Frequency: Up to 1GHz, providing high processing performance.
- Memory: 3.
- RAM: 1GB of RAM for storing runtime data and programs.
- GPIO Pins and Programmable Interfaces: 4.
- GPIO: Provides general-purpose input/output pins, programmable to configure as digital input or output.
- PWM (Pulse Width Modulation): Possibly supports PWM output for controlling motors, lights, etc.
- ADC (Analog-to-Digital Converter): Used to convert analog signals to digital values, suitable for reading sensor data.
- Possible other interfaces: Including but not limited to CAN (Controller AreaNetwork), depending on the specific hardware design.
- RS485 Interface: Supports devices using the RS485 communication protocol,applicable for applications such as long-distance communication and industrial automation control.
SPECIFICATIONS
Parameter / Specification
- Processor: STM32MP135DAE7 (ARM Cortex-A7, 1 core)
- Clock Frequency: Up to 1GHz
- Memory: 1GB RAM
- Ethernet Interfaces: 2 X Gigabit Ethernet
- USB Interfaces: 2 X USB 2.0 (Type A), 1 X USB 2.0 OTG (Type C)
- HDMI Display Interface: 1 X HDMI Display
- CAN Interfaces: 2 X CAN
- 12C Interfaces: 2 X 12C
- UART Interfaces: 2 X UART
- Storage: 1 X SD card
- RS485 Interface: 1 X RS485
- LCD Display: 2.0″ IPS Color LCD, 240 × 320 pixels
- Speaker Output: 2.5W Speaker
FCC STATEMENT
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference
- This device must accept any interference received, including interference that may cause undesired operation.
IMPORTANT NOTE:
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
QUICK START
Display Network Card IP Information
UNREGISTERED VERSION – Please support MobaXterm by subscrbing to the professional edition here: https://mobaxterm.mobatek.net
- Open serial port software such as MobaXterm.
- (refer to https://github.com/m5stack/m5stack-linux-dtoverlays/blob/main/doc/CoreMP135/1.3%E7%B3%BB%E7%BB%9F%E7%99%BB%E9%99%86.m d View login system tutorial)
- Select the corresponding port and set the baud rate to 115200.
- Log in to the device (Username: root, Password: root).
- Enter ifconfig eth0 to display the ip information
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>