i-tec C31HUBMETAL703 7 Port USB C Charging Metal Hub User Manual
- June 3, 2024
- i-tec
Table of Contents
i-tec C31HUBMETAL703 7 Port USB C Charging Metal Hub
Please read the entire instruction manual carefully. Detailed manual is available on our website www.i-tec.pro/en in the tab „Manuals, drivers“. In case of any issues, please contact our technical support at: support@itecproduct.com
INSTALLATION IN WINDOWS, MACOS, LINUX, ANDROID, CHROMEOS
The HUB installs automatically from the system and requires no drivers.
Connect the HUB with a USB-C cable to an available USB-C port on your device.
DESCRIPTION
- 1x integrated USB-C cable to connect to the device (30cm)
- 1x USB-C port to connect additional power for HUB up to 15W (5V/3A)
- USB HUB power LED indication
- 7x USB-A 3.2 Gen 1 port with fast charging support (BC 1.2)
POWER
In case of connecting highly power-hungry devices (e.g. external drives, mobile phones, etc.) it is important to plug in a USB-C (max. 5V 3A) power adapter or connect the HUB via USB-C to a free USB port on your device. Adapter – not included. Otherwise, the USB port of the device may not be able to supply enough power needed to operate these devices.
CHARGE
The HUB supports charging of connected USB mobile devices such as smartphones
(including iPhones and Samsung phones), e-book readers, media players,
navigation devices and tablets. The HUB does not support charging of iPad and
Samsung tablets, which require special identification circuits. Simply connect
the device to be charged with the original cable to the USB port of the HUB.
Note: All USB 3.2 Gen 1 ports support fast charging (BC 1.2), but only 1
device can be charged this way.
To use Fast Charging, you need to connect a USB-C power adapter to the USB
HUB.
SYSTEM REQUIREMENTS
Hardware requirements:
Devices with a free USB-C port
Operating system:
Windows 10, Windows 11, macOS, Linux, Android, Chrome OS
SPECIFICATIONS
- 1x integrated USB-C cable for connection to the device (30cm)
- 1x USB-C port for connecting additional power to the HUB up to 15W (5V/3A)
- 7x USB-A 3.2 Gen 1 port with fast charging support (BC 1.2)
- LED indication
- OS: Windows 10, Windows 11, macOS X, Linux, Android, Chrome OS
- Product dimensions: 157 x 30 x 21 mm
- Product weight : 90 g
SAFETY INSTRUCTIONS
- Do not expose to extreme temperatures and humidity.
- Use the device on flat pads to avoid slipping and falling on the ground.
- Keep the manual for later use.
In cooperation with the service department:
- Check functionality after falling into water or on the ground.
- Verify functionality when the cover is cracked.
- Complain about the device not working according to the manual.
FREQUENTLY ASKED QUESTIONS
Available on our website www.i-tec.cz under the “FAQ” tab for this product
This equipment is marked with the above recycling symbol. It means that at the end of the life of the equipment you must dispose of it separately at an appropriate collection point and not place it in the normal domestic unsorted waste stream. This wil benefit the environment for all. (European Union only)
FCC COMPLIANCE STATEMENT
This equipment has been tested and found to comply within the limits of a
Class B digital device pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
www.i-tec.pro/en
References
- Home | i-tec
- Home | i-tec
- Homepage | i-tec
- Home | i-tec
- Inicio | i-tec
- Accueil | i-tec
- Homepage | i-tec
- Home | i-tec
- Start | i-tec
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>