NEXIGO NS32 Wireless Controller User Manual

NEXIGO NS32 Wireless Controller

Product Information

• Specifications
  • Battery Capacity: 600mAh
  • Charging Voltage: DC 5V 600mA
  • Playtime: 6 Hours
  • Connection Method: Wireless or Wired

Product Usage Instructions

• RGB Light Setting
  • To change the RGB light colour, press the Turbo button and click the L3 or R3 key at the same time. There are seven different colours to choose from, which cycle in order.
  • To increase or decrease the brightness of the RGB lighting, hold the Turbo button and the L3 or R3 key.
  • Holding the Turbo button for more than 6 seconds will reset any applied turbo functions.
  • Make sure not to hold the button for more than 6 seconds if you want to maintain your turbo settings.
  • To change the light mode, press and hold the Turbo button and double-click the L3 or R3 key at the same time.
  • There are three different modes to choose from: a breathing light pattern, a colourful flowing light pattern, and lights off.
• Wireless Connection (for Switch/Android)
  • Before First Use: Please ensure that your device is powered on and has been updated to the latest version before pairing the controller.
  • Place the Switch console in the dock.
  • Connect the controller to the dock using the included USB cable.
  • Unplug the cable from the controller.
  • The controller will automatically connect with the Switch console via wireless within 1-2 seconds.
  • It is recommended to calibrate your joystick if this is the first time you are connecting this device.
• Wireless Pairing (Switch Console)
  • Make sure the device you want to pair with is powered on. From the home menu in the Switch console, select “Controllers”.
  • Select “Change Grip/Order” on the Controllers menu page.
  • Press and hold both the Y and Home buttons (or press and hold the Pairing button) for more than two seconds to enter pairing mode with the Switch console.
  • The Player Indicator LEDs on the controller will flash to indicate that the pairing was successful, and then the appropriate player indicator LEDs will illuminate. The pairing is now complete.
• Wireless Pairing (Android)
  • Make sure the device you want to pair with is powered on. To connect on Android, enable Bluetooth on your Android device.
  • Simultaneously press the Home and X buttons on the NS32 until “Gamepad / Xbox Wireless Controller” appears on the list of available devices.

FAQs

• How do I change the RGB light colour?
  • To change the RGB light colour, press the Turbo button and click the L3 or R3 key at the same time.
  • There are seven different colours to choose from, which cycle in order.
• How do I adjust the brightness of the RGB lighting?
  • To adjust the brightness of the RGB lighting, hold the Turbo button and the L3 or R3 key.
  • Holding the Turbo button for more than 6 seconds will reset any applied turbo functions.
  • Make sure not to hold the button for more than 6 seconds if you want to maintain your turbo settings.
• How do I change the light mode?
  • To change the light mode, press and hold the Turbo button and double-click the L3 or R3 key at the same time.
  • There are three different modes to choose from: a breathing light pattern, a colourful flowing light pattern, and lights off.
• How do I pair the controller with a Switch console?
  • Make sure the device you want to pair with is powered on.
  • From the home menu in the Switch console, select “Controllers”.
  • Select “Change Grip/Order” on the Controllers menu page.
  • Press and hold both the Y and Home buttons (or press and hold the Pairing button) for more than two seconds to enter pairing mode with the Switch console.
  • The Player Indicator LEDs on the controller will flash to indicate that the pairing was successful, and then the appropriate player indicator LEDs will illuminate. The pairing is now complete.
• How do I pair the controller with an Android device?
  • Make sure the device you want to pair with is powered on.
  • To connect on Android, enable Bluetooth on your Android device.
  • Then, simultaneously press the Home and X buttons on the NS32 until “Gamepad / Xbox Wireless Controller” appears on the list of available devices.

WELCOME TO THE NEXIGO FAMILY!

Thank you for choosing the NexiGo NS32 Wireless Controller! You are now part of an exclusive club: the NexiGo family! It’s our job to make sure you enjoy your membership. If you have any problems please contact us at cs@nexigo.com. anytime for further assistance. Make sure to register your purchase at nexigo.com/warranty. within 14 days of the delivery date to extend your warranty coverage to TWO Years! From all of us here at NexiGo, we want to welcome you again to the family. We thank you deeply for your trust and your business. We know you’ll love it here. We look forward to serving you again shortly. Yours Sincerely, The NexiGo Team.

PACKAGE INCLUDES

• Controller for Switch x 1
• USB Charging Cable x 1
• User Manual x 1

PRODUCT OVERVIEW

1. – Button
2. Screenshot Button
3. Home Button
4. + Button
5. RGB Lights
6. X / Y / A / B Buttons
7. Right Joystick / R3
8. Left Joystick / L3
9. D-Pad
10. Player Indicator LEDs
11. R Button
12. ZR Button
13. L Button
14. ZL Button
15. USB Type-C Charging Interface
16. Pairing Button
17. Turbo Button

SPECIFICATIONS

• Battery Capacity: 600mAh
• Charging Voltage: DC 5V 600mA
• Playtime: 6 Hours
• Connection Method: Wireless or Wired

RGB LIGHT SETTING

1. To change the RGB light colour press the Turbo button and click the L3 or R3 key at the same time. There are seven different colours to choose from cyclically.
2. Press the Turbo button and hold the L3 or R3 key to increase/decrease the brightness of the RGB lighting cyclically. During this time, holding the Turbo button for more than 6 seconds will reset any applied turbo functions. Ensure that you do not hold the button for more than 6 seconds if you wish to maintain your turbo settings.
3. Press and hold the Turbo button and double-click the L3 or R3 key at the same time to change the light mode. There are three different modes to choose from: a breathing light pattern, a colourful flowing light pattern, and lights off.

WIRELESS CONNECTION (FOR SWITCH/ANDROID)
BEFORE FIRST USE

Note: Please ensure that your device is powered on and has been updated to the latest version before pairing the controller.

1. Place the Switch console in the dock.
2. Connect the controller to the dock with the included USB cable.
3. Then unplug the cable from the controller. The controller will automatically connect with the Switch console via wireless in 1-2 seconds. We recommend now calibrating your joystick if this is the first time you are connecting this device.

WIRELESS PAIRING (SWITCH CONSOLE)

1. Make sure the device you want to pair with is powered on. From the home menu in the Switch console select Controllers as shown below.
2. Select Change Grip/Order on the Controllers menu page as shown below.
3. Press and hold both the Y + Home buttons (or press and hold the Pairing button) for more than two seconds to enter pairing mode with the Switch console.
4. The Player Indicator LEDs on the controller will flash indicating that the pairing was successful and then the appropriate player indicator LEDs will illuminate. The pairing is now complete.

WIRELESS PAIRING (ANDROID)

1. Make sure the device you want to pair with is powered on. To connect on Android, enable Bluetooth on your Android device.
2. Then, simultaneously press the Home and X buttons on the NS32 until the Gamepad / Xbox Wireless Controller appears on the list of available devices.
3. Select it from the list and accept the pairing request.

WIRELESS PAIRING (IOS)

1. To connect using iOS, enable Bluetooth on your iPhone.
2. Then, simultaneously press the Home and B buttons on the NS32 until the Xbox Wireless Controller appears on the list of available devices.
3. Select it from the list to finish pairing your controller.
4. The player indicator LEDs on the controller will flash indicating that the pairing was successful and then the appropriate player indicator LEDs will illuminate. The pairing is now complete.

TO DISCONNECT

1. While in wireless connection mode, press and hold the Home button for three seconds. The controller will unpair from your device.

AFTER FIRST USE

1. Press and hold the Home button for one second to wake up the controller.
2. After being woken up the controller will automatically connect to the device it was last paired with.

USB WIRED CONNECTION

USB WIRED CONNECTION (FOR SWITCH/PC)

1. Use the provided cable to connect the controller to your device.
   • Note: A PC will provide charging to the controller while connected, the Switch console will not.
2. There are three different modes for wired connections. These can be switched between by pressing and holding the + and – buttons at the same time for three seconds.
   • a. DirectInput mode is the default mode for connecting to a PC. When using this mode the 2nd and 4th player indicator LEDs will remain permanently lit indicating this is the active mode.
   • b. XInput mode is an alternate mode for connecting to a PC. This mode can be used if you find controller limitations in a game while using the DirectInput mode. When using this mode the 1st and 4th player indicator LEDs will remain permanently lit indicating this is the active mode.
   • c. Switch mode for connecting with a Switch console. When using this mode only the player indicator LEDs for your controller position will remain permanently lit indicating this is the active mode.
3. After switching to a wired connection the wireless connection will automatically disconnect.
4. After unplugging the wired connection the controller will automatically attempt to reconnect to the last paired device.

FACTORY RESET

To reset the controller, press and hold the Home button for at least ten seconds. The controller will be powered off and will then reset itself. You need to re-pair the controller to your devices using the methods outlined above.

FUNCTIONS

SLEEP FUNCTION

1. The controller will automatically go to sleep if the wireless connection is unsuccessful after ten seconds.
2. To prolong battery life the controller will automatically go to sleep after five minutes if no buttons are pressed.

CHARGING INDICATOR

1. The built-in player indicator LEDs will rapidly flash when the battery is low. Please charge the controller when you see this signal.
2. If the charge level drops too low the controller will automatically go into sleep mode to preserve the battery.
3. The player indicator LEDs will slowly flash while charging, and when fully charged will remain illuminated and stop flashing. The lights will turn off after a few minutes when the controller is fully charged and is not being used.

HOW TO USE

HOW TO USE TURBO FUNCTION?

Many of the buttons on this controller can be set to turbo functionality. The buttons capable of using the turbo function are A/B/X/Y/R/L/ZL/ZR.

TURBO FUNCTION TUTORIAL

1. Press the A and the Turbo button at the same time and release. The A key will now be in Turbo mode.
2. Press the A and the Turbo button at the same time again to turn off the Turbo mode.
3. Press and hold the Turbo button for five seconds to clear all turbo settings.

TURBO SPEED ADJUSTMENT

1. Press the Turbo button and the – button at the same time to decrease the turbo speed.
2. Press the Turbo button and the + button at the same time to increase the turbo speed.
3. Turbo speed can be adjusted in three levels.
   • a. Continuous burst at 5 times per second (Fast)
   • b. Continuous burst at 12 times per second (Faster)
   • c. Continuous burst at 20 times per second (Fastest)
4. When adjusting the speed the controller lights will flash to indicate what the current speed setting is. This flashing indicator is slow for the slowest speed and increases in frequency as the speed of the turbo increases.

MOTOR VIBRATION STRENGTH ADJUSTMENT

1. Press the Turbo button and the Down button at the same time to decrease the haptic feedback vibration strength.
2. Press the Turbo button and the Up button at the same time to increase the haptic feedback Vibration strength.
3. The controller motor vibration has four adjustment levels:

  *  **a. 0% –** Turns the vibration motors off completely. This can also be done in settings for many games.
  *  **b. 30% –** The lightest setting. This provides minimal feedback.
  *  **c. 75% –** The default setting. This setting provides noticeable feedback.
  *  **d. 100%** **–** The maximum setting. This setting provides significant feedback.
2. After choosing a vibration level the motor will vibrate at the chosen level for 0.5 seconds to indicate that choice.

NOTES

• When not in use, it is recommended that you store the controller and do not leave it plugged in for long periods.
• To ensure the longevity and lifespan of the unit, protect it from dust and do not place other objects on it.
• If the controller is inoperable but does not show signs of damage, please exercise the warranty or dispose of the item.
• Keep away from small children due to potential hazards.
• Do not give to children under three years of age.
• Do not charge the controller using a frayed or damaged USB cable.
• Do not touch the device, power adaptor, or USB cable with wet hands. Keep this product dry.
• Do not attempt to repair, disassemble, or modify the controller under any circumstance.
• Do not place the controller near fire, heat sources, or in direct sunlight.
• Do not apply strong impact or weight on the product.
• Do not pull roughly or bend the cable of the product.
• If the product needs cleaning, use only a soft dry cloth. Do not use any chemical agents like benzene or thinner.

FCC

FCC REQUIREMENT

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

IC CAUTION

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic DevelopmentCanada’s licence-exempt RSS(s).

Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.
3. The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

CONTACT INFORMATION

• Website: www.nexigo.com.
• Manufacturer: Nexight INC
• Email: cs@nexigo.com.
• Tel: +1(458) 215-6088
• Address: 11075 SW 11th St, Beaverton, OR, 97005, US

References

• NexiGo Warranty Registration | NexiGo
• NexiGo | Home Theater Projectors & Video Collaborations

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>