NEXIGO NS45 Gripcon For Switch / Switch OLED Controller User Manual
- June 1, 2024
- NEXIGO
Table of Contents
NEXIGO NS45 Gripcon For Switch / Switch OLED Controller
Scan the QR code or visit our link to download the latest manual or watch the installation video. nexigo.com/manuals
WELCOME TO THE NEXIGO FAMILY!
Thank you for choosing the NexiGo Gripcon! You are now part of an exclusive
club — the NexiGo family! It’s our job to make sure you enjoy your membership.
If you have any problems, please contact us any time at
[email protected] for further assistance. This product is
automatically covered by our industry-leading one-year manufacturer’s
warranty. Make sure to register your purchase at
nexigo.com/warranty within 14 days of the
delivery date, and we will extend your warranty coverage another year, for a
total of two years! From all of us here at NexiGo, we want to thank you for
your trust in us. We look forward to serving you again shortly.
Yours Sincerely,
The NexiGo Team
CONTACT INFORMATION
Website: www.nexigo.com
Manufacturer: Nexight INC
Email: [email protected]
Tel: +1(458) 215-6088
Address: 11075 SW 11th St, Beaverton, OR, 97005, US
PRODUCT OVERVIEW
- – Button
- + Button
- Left Joystick / L3 Button
- Right Joystick / R3 Button
- D-pad
- X / Y / A / B Buttons
- Turbo Button
- Lighting Button
- Screenshot Button
- Home Button
- Type-C Connector
- R Button
- L Button
- ZR Button
- ZL Button
- Right M Button (Mapping the MR button)
- Left M Button (Mapping the ML button)
- Haptic Feedback Strength +
- Haptic Feedback Strength –
- MR Button
- ML Button
- Type-C Charging Port
PACKAGE INCLUDES
- 1 x Controller for Switch / Switch OLED
- 1 x Type-C to Type-A Cable
- 1 x User Manual
SPECIFICATIONS
- Rated Input: DC 5V 500mA
- Working Temperature: 14℉ ~ 122℉ (-10℃ ~ 50℃)
- Storage Temperature: -4℉ ~ 158℉(-20℃ ~ 70℃)
HOW DO I CONNECT THE NEXIGO CONTROLLER TO MY SWITCH CONSOLE?
- Please enable the Pro Controller Wired Communication setting in the Switch / Switch OLED console itself. You can do this by going to System Settings > Controller and Sensors > Pro Controller Wired Communication. Set Pro Controller Wired Communication to On.
- Slide the Switch / Switch OLED console into the controller and plug it into the USB-C port at the bottom. After you have done so, press the A button on the controller to connect it to the console.
HAPTIC FEEDBACK STRENGTH ADJUSTMENT
- Press the Haptic Feedback Strength – button to decrease the haptic feedback vibration strength.
- Press the Haptic Feedback Strength + button to increase the haptic feedback vibration strength.
- After choosing a vibration level, the controller will vibrate at the chosen level for half a second to indicate that choice.
- There are five adjustment levels for haptic feedback:
- Off – Turns the vibration motors off completely. This can also be done in settings for many games.
- 30% – The low-intensity setting. This provides slight feedback.
- 50% – The medium-intensity setting. This provides moderate feedback.
- 75% – The high-intensity setting. This setting provides noticeable feedback.
- 100% – The maximum setting. This setting provides significant feedback.
HOW DO I ADJUST THE RGB LIGHTING?
ADJUSTING THE LIGHT COLOR
Press the Lighting button to change the RGB light colour between blue, red,
green, yellow, cyan, orange purple, and pink, or shift through an array of
different colours with RGB Cycling Mode.
ADJUSTING THE LIGHT MODE
Double-click the Lighting button to change the light mode between Breathing
Mode, RGB Cycling Mode, and lights off.
ADJUSTING THE BRIGHTNESS
Hold the Lighting button and press the Up / Down button (on the D-pad) at the
same time to change the light brightness between 25% / 50% / 75% / 100%
HOW TO USE THE TURBO FUNCTION
Many of the buttons on this controller can be set to turbo functionality. The
buttons capable of using the turbo functions are A / B / X / Y / L / R / ZL /
ZR / D-pad.
ADJUSTING THE BRIGHTNESS
Hold the Lighting button and press the Up / Down button (on the D-pad) at the
same time to change the light brightness between 25% / 50% / 75% / 100%.
SET OR CLEAR TURBO
- Semi-auto Turbo Mode
- Press the Turbo button and one of the above buttons to enable the semi-auto mode.
- Press and hold one of the A / B / X / Y / L / R / ZL / ZR
- D-pad buttons, that input will trigger multiple times.
Full-auto Turbo Mode
Repeat the above step to enable full-auto mode. Once the full-auto mode is
activated, the button you assign will be fully automatic, meaning it will
trigger repeatedly much faster than in semi-auto mode.
Disabling Turbo Mode
Repeat the above step for the third time to disable the turbo function on the
corresponding button. Press and hold the Turbo button for 5 seconds to clear
all saved turbo settings.
Note: Turbo settings will also be cleared after the controller is
disconnected.
TURBO SPEED ADJUSTMENT
Hold the Turbo button and press the – / + button at the same time to decrease
or increase the turbo speed. There are three adjustment levels for the turbo
speed: 5 times/second, 12 times/second, and 20 times/second.
MAPPING THE REAR BUTTONS:
- Many of the buttons on this controller can be mapped to the rear buttons. The mappable buttons are A / B / X / Y / L / R / ZL / ZR / + / – / Left Joystick / Right Joystick / L3 / R3.
- The rear buttons that you can map to are: ML / MR.
- Press and hold either the Left or Right M button to enter mapping mode, and release the button to complete the mapping. Use the Left M button to map the ML button, and the Right M button to map the MR button.
HOW TO MAP THE BACK BUTTONS
Mapping One Button
Press and hold either the Left / Right M button and then press the mappable
button you wish to map to it. The controller will vibrate for half a second to
indicate that the mapping for the ML / MR button is complete (Please set the
haptic feedback to a noticeable level).
Mapping Button Combinations
The ML / MR buttons support mapping up to 20 inputs (including time intervals)
under a single button press. This means you can save entire button combos
(such as a special move in a fighting game) to each of these buttons and
execute them exactly as you input them, all with a single press. To do so,
press and hold the Left / Right M button and then press the combination of the
Mappable Buttons you wish to map. The controller will vibrate for half a
second to indicate that the process was successful (Please set the haptic
feedback to a noticeable level).
Note: Mapping settings will be cleared after being disconnected.
Reset the Controller
Press and hold the Home button for ten seconds or head to the Change Grip /
Order menu in the Nintendo Switch settings. The controller will power off and
then reset itself. This process will remove the turbo settings and any button
mappings that were previously saved.
SAFETY NOTES
Only use the original Switch / Switch OLED power adapter to power the unit.
Using any other power adapter or cable may cause damage to the product.
To ensure the longevity and lifespan of the controller, please keep it clean and do not stack heavy objects on top of it. If the controller is inoperable but does not show signs of damage, please exercise the warranty or dispose of the item. Keep the controller away from children under three years of age due to potential safety hazards. Do not charge the controller using a frayed or damaged USB cable. Do not touch the device, power adapter, or USB cable with wet hands. Keep this product dry. Do not attempt to repair, disassemble, or modify the controller under any circumstance. Do not place the controller near high heat sources such as a space heater, fire, or in direct sunlight.
FCC REQUIREMENT
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment. This
device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Get in touch with FREE online services. facebook.com/letsnexigo
Register to get an EXTRA ONE-YEAR warranty.
Only valid in registering within 14 days of product delivery.
nexigo.com/warranty