NEXIGO NG16UFG-S 2.5K 144Hz 16 Inch Portable Gaming Monitor User Manual

NEXIGO NG16UFG-S 2.5K 144Hz 16 Inch Portable Gaming Monitor

Product Usage Instructions

• Before using the monitor, please read the user manual carefully and follow all safety instructions provided. Failure to do so may result in device loss or injury.
• Ensure children are supervised when using the monitor and that they do not play with it. Do not allow children to perform cleaning or maintenance without supervision.
• Avoid exposing the monitor to moisture, liquids, extreme temperatures, or small objects that could cause short circuits.

IMPORTANT SAFETY INSTRUCTIONS

PLEASE READ THE FOLLOWING SAFETY INSTRUCTIONS BEFORE YOU START USING THE MONITOR.

• Read the user manual in full before operating your monitor and make sure to save it for future reference. Follow all instructions provided, failure to do so may result in the loss of the device or injury
• This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be done by children without supervision.

OPERATIONAL SAFETY MEASURES

• For appliances having a specially prepared cord, if the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent.
• To reduce the risk of fire and/or electric shock, do not expose the monitor to moisture or liquids.
• Do not install the monitor near heat sources or any other appliance that emits heat.
• Do not allow small objects to enter the monitor. They may cause the monitor to short circuit, which could start a fire or create an electric shock.
• Do not use the monitor under the following conditions:
  • In extremely hot, cold, or humid environments.
  • Ensure that the ambient room temperature is within ~5°C – ~40°C
  • Ensure that the relative humidity is ~10% – ~85%
  • In areas susceptible to excessive dust and dirt.
  • Near any appliance generates a strong magnetic field.
  • In direct sunlight.
• Do not use the monitor if it has been physically damaged or abused. Physical damage/abuse could include (but is not limited to) the following circumstances:
  • The monitor has been dropped.
  • The power supply cord or plug has been damaged.
  • Liquid has been spilled onto/into the monitor.
  • The monitor has been exposed to rain or moisture.
  • Something has fallen into the monitor, or something is loose inside.
• Do not place the monitor on an unstable surface. The monitor may fall over, resulting in injury or damage to the unit.
• Please do not open or disassemble the monitor, as this may result in an electrical shock.
• Do not attempt to service the unit yourself. Opening the unit may expose you to dangerous voltages and/or other hazards. The unit should only be repaired by the manufacturer or its service agent.
• Only use attachments/accessories directly specified by the manufacturer.
• Do not use a power source with a voltage other than what is specified in this manual.
• Disconnect the power plug from the AC outlet if the product is not been used for a long time.
• Do not set up the monitor in areas where it might be subjected to vibration or shock.
• Please refer to the manual for how to properly install your monitor, as nonstandard installation may affect the monitor’s performance.
• Do not stand the monitor vertically. Doing so may cause the monitor to fall over, causing damage and/or injury.

WELCOME TO THE NEXIGO FAMILY!

Thank you for choosing the NexiGo Portable Monitor! You are now part of an exclusive club — the NexiGo family! It’s our job to make sure you enjoy your membership. If you have any problems, please contact us any time at [email protected] for further assistance.
From all of us here at NexiGo, we want to thank you for your trust in us. We look forward to serving you again soon.
Sincerely, The NexiGo Team

WHAT’S IN THE BOX

PRODUCT DIAGRAM

SPECIFICATIONS

• Screen Size: 16 inches
• Panel Type: IPS
• Aspect Ratio: 16:10
• Resolution: 2560 × 1600
• Refresh Rate: 144Hz for Type-C connection and 120Hz for HDMI connection
• Colour Depth: Up to 10-bit (For Type-C connection and refresh rate ≤ 120Hz)
• Contrast Ratio: 1200:1
• Speaker: Built-in Speakers
• Visual Area: 13.57 x 8.48 inches
• Power Input: AC 100V-240V-50/60Hz

DEVICES CONNECTION INSTRUCTIONS

For maximum brightness and 2560p@144Hz display, please use the provided wall charger to power the display, and make sure the interface of the connected device is full function Type-C.

CONNECT A COMPUTER USING A FULL-FUNCTION USB TYPE-C PORT

Note: When the device battery drops below 30%, an external power supply is required for the monitor to function. When the device’s battery is above 30%, the device will power the display and automatically activate the energy- saving mode on the monitor.
This will set the brightness of the display to low. You may adjust the display brightness and volume as needed on your device.

• The mouse or keyboard is connected to the USB Type-A port to control the screen.

CONNECT A PHONE USING A FULL-FUNCTION USB TYPE-C PORT

• When connecting the monitor to a Phone using a Type-C cable, you will need to power the monitor first using the provided wall charger.
• The refresh rate of HDMI connection can only reach up to 120Hz, and make sure the interface of the connected device is HDMI 2.0/DP 1.4 or above.

CONNECT A COMPUTER USING THE HDMI PORT

• The display is compatible with most HD devices using an HDMI cable.
• When connecting the monitor to a computer using an HDMI cable, you will need to power the monitor first using the provided wall charger.

CONNECT OTHER DEVICES USING THE HDMI PORT

Note: For proper functionality with all devices, please connect the unit to the external power if needed before connecting the data cable.

REVERSE CHARGING FUNCTION

You can use the portable display to charge some devices via the full-function USB Type-C port. Simply connect your compatible device to the portable display, and then power the display using the provided wall charger.

• Device Compatibility: Mobile Phone, iPad Pro, Laptop with PD protocol
• Input Voltage: 5V~20V
• Input Electric Current: 1A~4A

ON-SCREEN DISPLAY (OSD) MENU INTRODUCTION

INSTRUCTIONS

1. Open the OSD Menu by pressing the OSD Menu/Power button
2. Highlight the selected feature by pressing the Volume +/Volume – buttons
3. Open the selected menu section by pressing the OSD Menu/Power button
4. Press and hold the Volume-/Input Source button to back out

FAQ

• Q1: Does this display require any additional software or drivers?

• A: The NexiGo portable display does not require any additional software or drivers to use. Simply plug your device into the display using the USB Type-C or HDMI cable, ensure that the display is properly powered (HDMI connections do not supply power, and USB Type-A connections do not either), and you are good to go!

• Q2: Can I use this display with the Playstation, Switch, or Xbox?

• A: Yes, this display is compatible with any game console that has an HDMI or USB Type-C output.
  For all of these systems, you will need to connect the monitor to the HDMI output port on the console, in addition to powering the display with one of the USB Type-C ports.

• Q3: How long does the battery last?

• A: The NexiGo portable display does not have a built-in battery for additional flexibility when travelling due to FAA regulations concerning batteries. The display instead pulls power directly either from a wall plug or from the device it is attached to through the USB Type-C connection. As such, it will last as long as your device’s battery lasts. This duration can be extended through the use of a portable charger or an external power supply.

• Q4: My laptop or cellphone has a Type-C port but is not on the list of supported devices, will this display still work for me?

• A: The NexiGo portable display has a wide range of compatibility, so many devices are compatible that we cannot name them all. As such, to figure out if your device would work with this display just determine if the item has a full-featured USB Type-C port or an HDMI port. If it has one of these ports it will work with the display, though it may require an external power source.

• Q5: Why does the screen’s image have colour defects or seem off?

• A: Please inspect any cables that are plugged in to make sure that the pins are straight and not bent. If they are bent, this may cause issues with the display.

• Q6: My device is showing up in “Power supply mode” when connecting to the portable display. Is this normal?

• A: The monitor only draws a small amount of power from its signal source. This is a normal result and nothing to worry about.

• Q7: My screen image bounces or there’s a wave pattern in the image, what should I do?

• A: Please ensure that the signal cable is properly connected between the monitor and the output device. If there is no issue with the cable and the display is still having issues, please contact NexiGo support for assistance.

FCC STATEMENT

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

CONTACT INFORMATION

• Website: www.nexigo.com
• Manufacturer: Nexight INC
• Address: 11075 SW 11th St, Beaverton, OR 97005, US
• Tel: +1(458) 215-6088
• Email: [email protected]

Get in touch with FREE online services. facebook.com/letsnexigo.

References

• NexiGo | Home Theater Projectors & Video Collaborations

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>