UMIDIGI MT13 G3 Ultra Tablet User Guide
- June 17, 2024
- Umidigi
Table of Contents
UMIDIGI MT13 G3 Ultra Tablet
PRODUCT HEX-VISION IMAGE
VOLUME BUTTON: Short press to adjust the volume or to mute incoming calls.
PRODUCT HEX-VISION IMAGE
POWER BUTTON: Long press to turn on the device; When the device is on, short press the Power Button to shut down or turn on the screen.
CARD INSERT MANUAL
Insert Nano-SIM Card
- Please face the chip side of the Nano-SIM card down when inserting it into the slot.
- Be aware of the direction of the cut edge when placing the Nano-SIM card into the slot.
Reminder
- Please use a standard Nano-SIM card. Please don’t use a non-standard card that is hand-cut, to prevent the SIM slot and card tray from being damaged and card -the rejection situation that may cause damage to the tablet.
TF Card Installation
Please place the metal contact of the TF card down, and be aware of the
direction of the cut edge. Place the card onto the tray and insert it into the
device.
Reminder
Please turn off the tablet before changing or replacing the TF card. TF card
does not come with the tablet, please purchase separately.
TF Card Installation
Please place the metal contact of the TF card down, and be aware of the
direction of the cut edge. Place the card onto the tray and insert it into the
device.
Reminder:
Please turn off the tablet before changing or replacing the TF card. TF card
does not come with the tablet, please purchase separately.
DUAL-SIM MANAGEMENT
Please choose which SIM card slot to be the main one for 4G network via
Setting > SIM Card. Choose your preferred network types of 4G/3G/ 2G via
Setting > Network & Internet > Mobile network > Preferred network type.
NETWORK CONNECTION
Connecting WLAN
- Into the setting of WLAN via Settings > Network & Internet > Wi-Fi When WLAN is on, a list of available Wi-Fi connections will appear.
- Click on the one you want to connect to, enter the password if the network is encrypted, and then click Connect. When it’s a public network, just click Connect When the network shows “connected”, it is available to use.
Bluetooth Function
- Into the setting of Bluetooth function via Settings > Connected devices > Bluetooth
- Enable the Bluetooth function by clicking the Menu Button then select “Refresh”, then the tablet will search for available Bluetooth devices for pairing and list on the screen.
- Click on the one you want to pair with, then click “Pair “on the dialog pop-up. Documents are available for transmission after Bluetooth pairing.
Reminder: Slide down the status bar to open the shortcut switches for Bluetooth and other functions.
WLAN Hot-spot Setting
- Click on Settings > Network & tethering > Wi-Fi hotspot to turn on the Portable
- WLAN Hot-spot function. When setting up the WLAN hot-spot, enter your user name in “Network Name” and password, then click Save. Another device can use the
- WLAN hot-spot by searching and entering the password.
Reminder:
- Please enable the Data Connection before enabling the network sharing function.
- Your mobile traffic will be shared by other devices, so please use it carefully. The signal of the WLAN hot spot depends on the signal strength and devices.
CAMERA
- Aim the camera at the shooting object, and the tablet will start focusing automatically; or you can click on the screen to choose the object you want to focus on, then click the “Capture”icon to take photos.
- You can also choose other modes such as video recording to record videos.
INSTRUCTIONS FOR DUAL-CARD STANDBY
“Dual card, dual standby, single pass” means you can insert two SIM cards and have them both “standby”, but cannot make phone calls at the same time. During the standby mode both cards are available for receiving phone calls, but once one of the cards is activated, the other one cannot receive phone calls nor make phone calls.
SECURITY INFORMATION
- Security information (including BS, ES, and battery security information)of third-party software installation and function may vary in different regions or by different hardware specifications.
- UMIDIGI holds a disclaimer for the performance problem or incompatibility caused by third-party applications, registry editing, and OS software modifying. Customizing the OS may cause the device or some applications to fail to work properly.
- Please prevent the device or the battery in extreme cold/hot conditions. The extreme temperature will lead to the deformation of the tablet and reduce the charging capacity and battery life.
- Please only use the custom-designed and approved battery and recharger by UMIDIGI. An incompatible battery and recharger may cause damage to the tablet.
- Please abide by local regulations when disposing of the used batteries and tablets.
- Please do not place the battery or the tablet onto or inside heating devices such as microwaves, ovens, or radiators. The battery may explode if it gets too hot.
- Please do not crush or pierce the battery. Prevent the battery from getting high pressure from outside, it may cause internal short and overheating.
FCC Statement
FCC Caution
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Note
- This equipment has been tested and found to comply with the limits for a
- Class B digital device, under part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help.
ISED Warning
Operation of 5150-5250 MHz is restricted to indoor use only. This device
complies with the Innovation, Science, and Economic Development Canada
license-exempt RSS standard(s). Operation is subject to the following two
conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
(SAR) information
The device has been tested and comply with FCC/ISED SAR limits.
Safety Statement
In all EU member states, the operation of 5150-5250MHz is restricted to
indoor use only.
In all EU member states, the operation of 5150-5250MHz is restricted to indoor
use only.
Made in China
Thanks
Building a great tablet is hard enough, so building a great tablet on a budget should be infinitely more difficult. Big thanks to all who made this super tablet super awesome by contributing valuable time and developing hardware, software & other developments.
Information
Thanks for choosing UMIDIGI products. Thanks to your support, our value can be realized and we can constantly move forward to create smart devices with better user experience.
Scan the following QR codes to follow us and enter the giveaway to win a UMIDIGI smart device for free!
- VK: vk.com/umidigi
- YouTube: youtube.com/umidigi
- Facebook : facebook.com/umidigi
- Twitter: twitter.com/umidigi
- Instagram : instagram.com/umidigi
Follow the
UMIDIGI community, a place where you can share and discuss with UMIDIGI users
and keep posted with the most up-to-date news.
- Manufacturer: Shenzhen Youmi Intelligent Technology Co.,Ltd.
- Add: 406-407 Jinqi Zhigu Building, 4/F,1 Tangling Road, Nanshan District, Shenzhen City, China.
- Amazon service Email: [email protected]