PNI-PC-DVR ACC Power Cable For PNI Dash Cam User Manual
- June 17, 2024
- PNI
Table of Contents
ACC power cable for PNI dash cam
Connection instruction
-
With the help of a voltage test pencil, identify the ACC output on your car’s dashboard. There must be no current on this output when the engine is off. It must be current only when the engine is running.
-
Connect the red wire (marked with ACC) to the ACC output of your car.
-
Identify the location of the 12V fuse in the fuse box of your car and connect the yellow wire (marked with BAT +) to that location.
-
Connect the black wire (marked with GND) to a metal surface (a screw, for example).
-
After connecting the 3 wires, connect the USB-C connector to the dashcam.
The car DVR is now powered and will turn on. -
If you want to have 24 hours monitoring, access the DVR settings menu and activate the Power Monitor function.
- Input voltage: 12V / 24V
- Output voltage: 5V / 2.5A
- Cable length: 3.5 m
- Connector: USB Type C
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>