NORTH VALLEY RESEARCH TX4000 Telematics Box Owner’s Manual
- May 15, 2024
- NORTH VALLEY RESEARCH
Table of Contents
NORTH VALLEY RESEARCH TX4000 Telematics Box
Specifications:
- Model: 195
- Type: SURIHVVLRQDO HOHFWURQLF FRQWURO VVWHP
- Usage: RlURDG YHKLFOHV
- Power: 86$DQG8
- Features: VXFKDVLHHWPDQDJHUUHQWDOFRPSDQ2(0QDQFHUDQGHWF195QRZKDVRSHUDWLRQVLQWKH&KLQD
Product Usage Instructions
-
Installation:
Follow the installation guide provided with the product to set up the device correctly. -
Powering On/Off:
To power on the device, press the power button for 3 seconds. To power off, press and hold the power button for 5 seconds. -
Settings Adjustment:
Use the settings menu to adjust brightness, volume, and other preferences according to your needs. -
Maintenance:
Regularly clean the device with a soft, dry cloth to prevent dust accumulation.
FAQ :
-
Q: How can I reset the device to factory settings?
A: To reset the device, go to the settings menu, select ‘Reset’, and confirm the action. -
Q: What should I do if the device encounters technical issues?
A: In case of technical problems, refer to the user manual for troubleshooting steps or contact customer support for assistance.
ABOUT NVR NORTH VALLEY RESEARCH
North Valley Research (NVR) is a professional electronic control system and
loT service provider for off-road vehicles. Control systems are widely used in
construction equipment, aerial work platform, agricultural machine, mining
equipment and etc. NVR also provides telematics service to stakeholders such
as fleet manager, rental company, OEM, financer, and etc. NVR now has
operations in the China, USA and UK.
TBOX TX4000 Mars Platform
TBOX-TX4000 Mars platform is a multi-functional telematics terminal, with
satellite positioning (support Beidou/GPS/GLONASS), CAN communication data
acquisition, signal acquisition, control output and other functions, and
built-in lithium battery, support no signal storage. It conforms to the
Chinese emission standard T4 fo Nonroad and T6 for on road vehicles. All
drives have a short-circuit protection function, and the controller can
provide fault diagnosis; CAN bus can be connected with other bus devices to
exchange data.
Key Features
Main Configuration
- 32 bit automotive-grade processors
- 4G communication module
- Built-in lithium battery (600mAh/1800mAh Opt ) A
- 2 * Analog input
- High-speed data storage chip
- 1 * CAN interface
- Power over-voltage protection circuit
- 2 * digital input/output
Customized Part
- Input / Output number and type
- SW function like : Geo-Fence, SMS alarm, Hour statistics
- 2 * optional configurable Input / Output
- 1 * optional configurable communication interface
- Optional Accelerometer
- Optional Open Cover Detection
- Optional encryption module
Electrical Parameters
Attention
This product can be used across EU member states.
RF exposure information: The Maximum Permissible Exposure(MPE) level has
been calculated based on a distance of d=20cm between the device and the human
body. To maintain compliance with RF exposure requirement, use product that
maintain a 20cm distance between the device and human body.
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
- If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help important announcement
IC Statement This device contains licence-exempt transmitters)/receivers) that comply with Innovation, Science and Economic Development Canada’s licence- exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Radiation Exposure Statement
This equipment complies with Canada radiation exposure limits set forth for
an uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body.
Dimensions
- 400-059-7588
- www.nvr-us.com
- [email protected]
- USA – Silicon Valley 1601 McCarthy Blvd. R-02, Milpitas, CA 95035
- UK – London 8B Accommodation Road, London, NW11 8ED China – Guangzhou Rm 2902, #365
- Tianhe North Rd, Tianhe District, Guangzhou, China
- China -Jinan Bldg #20, 2966 Chunhui Road, Jinan City, China
- China – Shanghai Rm 401,#36,Lane 2777,East Jinxiu Road, Pudong
- District, Shanghai, China China – Wuxi 3F, Block B, Rongzhi Building, 4 Longshan Road, Xinwu District, Wuxi City, Jiangsu Province, China