PARKSIDE Plant Irrigation Pot with LID Instruction Manual
- July 2, 2024
- PARKSIDE
Table of Contents
PARKSIDE Plant Irrigation Pot with LID
Product Specifications
- Product Name: Plant Irrigation Pot with Lid (Oya)
- Capacity: 1200 ml
- Material: Recyclable materials
Product Usage Instructions
Introduction
Congratulations on purchasing your new Plant Irrigation Pot with Lid (Oya).
Please read the following instructions carefully before use.
Use
- Dig a hole of size approx. 12 cm in width and 18-19 cm in depth.
- Bury the olla, leaving the mouth of the olla with at least 1 cm above the soil.
- Fill the water into the olla with a maximum of 1200 ml.
- Put the lid on.c
FAQ
Q: How much water should I fill in the olla?
A: Fill the olla with a maximum of 1200 ml of water, which can supply the
plant for about 7-14 days.
Instructions for use
PLANT IRRIGATION POT WITH LID
Introduction
We congratulate you on the purchase of your new product. You have chosen a high quality product. Familiarise yourself with the product before using it for the first time. In addition, please carefully refer to the operating instructions and the safety advice below. Only use the product as instructed and only for the indicated field of application. Keep these instructions in a safe place. If you pass the product on to anyone else, please ensure that you also pass on all the documentation with it.
Use
- Dig a hole of size approx. 12 cm in width and 18-19 cm in depth (see fig. A).
- Bury the olla. Leave the mouth of the olla at least 1 cm above the soil (see fig. B).
- Fill the water into the olla with a maximum 1200 ml (see fig. C).
- Put the lid on (see fig. D).
Refill
When water used out, fill with water again.
Note:
- Before using, make sure the plant pot is deep enough to fit the olla.
- Fill olla with 1200 ml water, it can supply the plant about 7-14 days.
- Water will gradually seep into soil to keep the plant hydrated. The speed of water use depends on types of plants, soil and humidity.
Disposal
The packaging is made entirely of recyclable materials, which you may dispose of at local recycling facilities. Contact your local refuse disposal authority for more details of how to dispose of your worn-out product.
The product incl. accessories, manual and packaging materials are recyclable
and are subject to extended producer responsibility.
Dispose them separately, following the illustrated Info-tri (sorting
information), for better waste treatment.
The Triman logo is valid in France only. Service
Service Great Britain
Tel.: 08000569216
E-Mail: owim@lidl.co.uk
IAN 446644_2307 OWIM GmbH & Co. KG Stiftsbergstraße 1
74167 Neckarsulm GERMANY
Model No.: HG11082D Version: 01/2024