SOUYIE T19Pro Smart Watch for Men Women Instruction Manual
- June 17, 2024
- SOUYIE
Table of Contents
SOUYIE T19Pro Smart Watch for Men Women
Introduction to the whole machine
Note : Press and hold the power-on key to turn the watch on
The watch is charged and activated
Before you use the watch for the first time, you need to charge to activate the metal point attached to the back of the watch using the equ dipped magnetic suction charging cable, and at the other end of the charging cable, you can connect to the USB charging head or computer USB port.
Watch client download
Scan the QR code to download and install the watch client or search for the
“Da Fit” download installation.
Connect the watch
This watch is a dual-Bluetooth call watch and it can be connected to-
bluetooth by connecting to the APP (Bluetooth on the APP and Bluetooth on the
mobile phone (audio))Open the APP and click “Device” to find the watch you
need to connect, click the watch Bluetooth name to IF connect, if the prompt
bar pops up, click “Pairing” or “Permission Allowed”, then you can connect
normally. Connect. Connect successfully as shown in the picture.
After the watch is successfully bound, each time the client is opened in the future, the watch will automatically connect to the phone and the data can be synchronized by pulling down on the client data page.
Watch operating instructions
Introduction to the call function
When your watch is connected to your phone, you can use your watch to dial- control your phone to make calls, or you can answer calls from your phone on your watch. You can also view your watch’s call history. When using the call function, you need to make sure that your watch is connected to your phone in a stable state.
Introduction to the function of the watch
Music Control
While connected, the watch can control the phone’s music player.
Motion information
The watch records and displays the number of steps you walk each day, the
calories burned, and mileage information. More detailed analysis and data
records can be viewed by the client.
Sleep
Your watch can record and show the total length of your sleep last night and
the length of your deep and light sleep. More detailed analysis and data
records can be viewed by the client.
Heart rate
The watch can record and display a heart rate of 24 hours throughout the day.
CIick on the heart rate interface to measure the current heart rate. More
detailed analysis and data records can be viewed by the client.
Blood pressure
Click on the b load pressure interface to measure the current blood pressure
value. More detailed analysis and data records can be viewed by the client.
Blood oxygen
Click on the oxygen interface to measure the current oxygen value. More
detailed analysis and data records can be viewed in the client.
Weather information
The weather page shows the current weather, air quality information, and
tomorrow’s conditions. Weather information needs to be connected to the client
before data can be obtained, and weather information cannot be updated if
disconnected for a long time.
Exercise
8 sports modes to choose from, including: walking, running, cycling, basketball, football, badminton, skipping rope, and swimming. More detailed analysis and data records can be viewed in the client.
Message push
The watch can receive notifications on the display phone, and you can set push
items on and off in the client.
Camera control
When the phone is connected, the watch can be used as a remote control for the
phone’s camera. When you turn on the camera on your phone, you can trigger the
phone’s camera door by tapping on the watch camera control page.
Other features
Other functions of the watch include a stopwatch, alarm clock, timer, brightness adjustment, vibration switch, do not disturb mode, cinema mode, factory resumption, shutdown, and about.
The dial switches
Press and hold the dial page, go to the dial switch, cross left and right to
switch the dial, and click confirm. You can also choose to switch dials in the
client
Basic parameters:
The dial switches Press and ho Id the d ia I page, go to the dial switch,
cross left and right to switch the dial, click confirm. You can also choose to
switch dials in the client
- Connection method: Bluetooth connection
- Input: SV—SOOmA MAX
- Device Requirements: Android 5.0 or iOS 9.0 and above
Precautions:
- It is forbidden to use an adapter with a charging voltage greater than SV and a charging current greater than 2A, and the charging time is 2-3 hours.
- It is forbidden to charge with water stains.
- Do not disassemble the casing of this product without authorization, the product will be damaged and the warranty will be lost.
Special note:
- This product is not a medical device, the measurement results are for reference only, not as any medical Use and Rationale. Please follow the doctor’s instructions, do not rely on this test resultSelf-diagnosis and treatment.
- This manual is produced based on the existing information, in Ii ne with continuous improvement and continuous development company reserves the product specification and function changes, and the description of this manual is right to make modifications and improvements to any product described.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>