SOUYIE B0CNGVGD46 Smart Watch User Guide
- June 15, 2024
- SOUYIE
Table of Contents
SOUYIE B0CNGVGD46 Smart Watch
Thank you!
Thanksgiving, I met you in the years like songs.
Thank you for choosing this smart watch. This watch will provide higher help and enjoyment for your exercise and health. For your convenience, please read the instructions carefully and follow the steps in the instructions.
Watch quick instructions
Parts introduction
Press and hold the side button to turn on the watch
Charging method and activation
Before using the watch for the first time, it needs to be charged and
activated. Use the equipped magnetic charging cable to attach to the metal
point on the back of the watch, and connect the other end of the charging
cable to a USB charging head or a computer USB interface.
Install the watch APP
Scan the QR code below or enter the major application markets to download and
install “H Band” .
Equipment requirements: iOS 10. 0 and above; Android 5.0 and above, supporting Bluetooth
Connecting the watch
The watch has dual Bluetooth function, the connection method is as follows.
- Open the APP and click “My Devices” to find the watch you need to connect, click connect, the APP side will pop up the pairing box, select pairing can be;
- If the audio Bluetooth is disconnected, APP side in “My Devices” inside, find “Bluetooth call” and then open the device communication Bluetooth, and at the same time, enter the call settings in the watch quick interface, click the bottom “not connected “Match with the phone, the phone will pop up a prompt box, select “pairing” to use the watch call function.
When the watch is connected to the phone, you can use the watch to dial and control the phone to make calls; you can also answer the calls from the phone on the watch.
You can also view the call history information of the watch.
When using the call function, you need to make sure the connection status of the watch and the phone is stable.
Main function page
Talking
Call function menu contains: dialing, contact, communication log (call
function must be in connected state to use).
Step count/dista nee/calories
Check the number of steps walked, the distance walked and the consumption at
any time during the day Calories can be synchronized to the APP to view
exercise data.
Sleep
You have a deep sleep/light sleep/sleep time all night, calculate your sleep
quality, sleep data can be synchronized to the APP.
Note: Sleep data will only be available when you wear the watch and fall
asleep.
Heart rate
Switch to the heart rate interface, you can enter the real-time heart rate
monitoring, the data can be synchronized to the APP, connected to the APP,
there is an automatic detection function.
Breathing exercises
The watch switches to the Breathing Training interface to enter the Breathing
Training You can choose to set the training duration from 1 to 5 minutes.
Find a cell phone
Once the watch is connected to the application, you can switch to the “Find
cell phone” function to make your cell phone ring.
Women’s Health
The watch can be connected to the app by connecting to the app, in the app set
the relevant information and then enable the Women’s Health feature.
Sedentary reminders
The watch connects to the app and then sets the information in the app to
enable the sedentary reminder.
Sport
Click the watch sports interface to enter sports mode, there are many sports
to choose from. Click the motion icon to enter the corresponding motion
detection. Swipe up and down to switch motions, enter the motion start
calculation, and press the up button or down button to exit the current motion
monitoring.
The weather
The weather page will display the current weather and air quality information.
The weather information can only be obtained after connecting to the client.
If the connection is disconnected for a long time, the weather information
will not be updated.
Note: There is no weather interface before the watch is connected to the APP, it needs to be connected, There is a weather interface after the APP, and the mobile phone needs to open the positioning.
Music
When connected, tap Music to control the music player on the phone.
Shortcut function
Swipe down on the main interface to enter the shortcut function interface,
select options such as “Find Phone, Vibration, Brightness, About, Settings”,
and click the icon to enter the corresponding function.
Information
Click on the message to view the content of the message, slide up to turn the
page, slide down to exit.
About
Click the about icon to display the machine model and the last four digits of
the Bluetooth address.
Raise your wrist
Tap the wrist lift icon to enter, you can choose to turn on or off the wrist
Iift.
Shut down
Click the shutdown icon to enter, you can shut down.
Other function reminders
After the APP is successfully connected, open the setting permissions and keep
the Bluetooth of the phone and the watch in the connection and pairing state.
When a message comes, there will be a vibration reminder
Basic parameters
Connection mode: Bluetooth connection
Input: SV, SOOmA MAX
Device requirements: Android 5.0or iOS 10.0 and above
Special note
- This product is not a medical device, the measurement results are for reference only, not for any medical purposes and basis. Please follow your doctor’s instructions and do not rely on the test results for self-diagnosis and treatment.
- This manual is based on existing information, in the spirit of continuous improvement, the principle of continuous development, the company reserves the right to change product specifications and functions, and any product described in this manual to modify and improve.