SOUYIE P75 Sport Smart Watch for Men Women User Manual
- June 14, 2024
- SOUYIE
Table of Contents
Operating Instructions for Smart
Sport Watch Product
Appearance Description
Schematic Diagram of Charging
Operate in strict accordance with the following figures:
- Please use the product-specific magnetic charging cable to charge by aligning it with the charging contacts on the back of the watch.
- Do not use a power adapter with a voltage exceeding 5V and an output current exceeding 1A for charging, as this may cause charging failure and damage to the magnetic charging cable or the device.
- Please activate the watch when it runs out of power before charging: the watch screen will only light up after about 5 minutes of normal charging.
Introduction to Watch Function
- Do Not Disturb On/Off
- Brightness adjustment
- Search function
- Call Bluetooth switch
- Theme mode switch
- Setting
| Main interface: Display the current time, date, steps and other information
of the watch; press the main interface for a long time to switch the main dial
left and right, and click to confirm.
---|---
| Call function: Click the call switch. Open the phone settings – Bluetooth –
search connection Bluetooth P75-xxxx to play mobile music or make/receive
calls, etc.
| Steps: Display current steps, distance and calories of the watch.
| Heart rate: Slide to this page and keep a while and automatically measure
the current real-time dynamic heart rate. Connectable to APP to set real-time
monitoring and view data records.
| Blood pressure: Slide to this page and keep a while and automatically
measure the current blood pressure data and vibrate to indicate the result.
Connect the APP to view the watch offline measurement data or online
measurement synchronously.
| Blood oxygen: Slide to this page and keep a while and automatically measure
the current blood oxygen data and vibrate to indicate the result.
| Exercise: Click on the icon on this page to access the multiple sport modes
option. Select a sport mode, click the icon to start, and slide right to pause
or stop the sport.
| Sleep: The bracelet can record and display your sleeping time last night,
and the time of deep sleep and light sleep. More detailed data can be viewed
synchronously in the APP.
| Weather: Display the local weather conditions. Connect the synchronization
APP for normal use, and open the phone GPS to ensure that the APP gets the
positioning ermission function and network connection.
| Message: The watch can receive cell phone calls, SMS, QQ, WeChat and other
notification alerts, which can be set according to the message alert and turn
on the corresponding push switch on the APP. This page can store up to 8
message records. This function needs to stay connected with the phone and make
sure the APP gets the corresponding permission.
| Music: After connecting the APP, the watch can control the mobile phone
player to play/pause/switch to the previous song and the next song. This
function must be opened on the mobile phone player before it can be controlled
on the watch. This function requires staying connected to your phone and
turning on the notification push permission.
| Stopwatch: Click on the icon to start the function, and click Start for
timing, pause or reset. Slide right to leave.
| Search: Click this icon, your phone will beep to indicate the orientation of
your phone, this function requires your phone to stay connected with the watch
APP. No alert on the phone in silent mode.
| Setting: Click on the icon to start the function, switch left and right to
set the brightness adjustment, factory data reset, turn off the watch and view
the watch information.
Watch APP Installation and Connection Instructions
As a Bluetooth product, most of the functions of this product need to be connected to a special APP for normal use, such as time display, call alert, and message alert. For Android phones, please do not use Bluetooth to connect and pair with the watch directly. Please scan the following QR code to select the version suitable for your mobile phone system or enter main application markets to download and install Glory Fit.
https://app.help-document.com/gloryfit/download/index.html
Device Connection
Before using the APP, please turn on the mobile phone Bluetooth and mobile
phone GPS positioning to obtain the mobile phone positioning permission. After
the connection is successful, it will prompt ” To pair with: P75 ” , please
select pairing.
The watch connection operates as follows:
Note:
- For Android users, the APP should obtain permissions and run backstage, otherwise it will affect the user experience.
- For systems below iPhone i0S 13, after connecting in the APP, you need to connect to the P75 for the second time in the Bluetooth settings of the mobile phone, and then you can make calls, play multimedia music and other functions.
Precautions
- No charging with water stains.
- This product is an electronic monitoring product, not for medical use, and the measurement data is for reference only.
- Itis not recommended to wear in hot water baths and longtime swimming.
- Please charge with the matching charging cable.
FAQ
1. Problems such as the watch cannot be searched in the APP, or the watch cannot synchronize with the time of the phone.
Answer: A. Make sure your phone's Bluetooth and phone GPS positioning are on befaore using it for the first time. B. Users need to open the APP to obtain positioning permission (Phone Settings - Applications). C. If the watch has already been paired with a Bluetooth connection in the phone, please cancel the pairing first and then search for the connection in the APP. D. If the watch is not used for a long time, the Bluetooth will go into a dormant state. Please turn off the Bluetooth of the watch and the phone, reopen it after about 1 minute, and try to search the connection in the APP again. E. The watch must be connected to the APP, otherwise, the steps, sleep, time, and other function will not work properly.
2. There is no alert function on the watch.
3. The reminder switch is turned on, but there is no reminder on the watch, or the reminder is sporadic.
Answer: If the phone turns on the message notification and the corresponding notification permission according to the above tips, the Bluetooth is kept on, and the APP and the watch are kept connected, maybe the system authorized APP alert function is not working, and the user needs to re-check the message push function.
4. Android's phone Bluetooth often disconnects or has no message alert after a period of connection.
Answer: Android will from time to time clean up the phone's backstage applications or applications that consume more power for smooth system operation. If the APP is not set to allow backstage running, it will be easily cleaned by the system and the Bluetooth will drop out. Different Android phones have different methods for APP backstage running settings. As in the Huawei nova 8 SE: Settings - Battery - Power Consumption Ranking - APP - Application Launch Management - Manually manage to turn on backstage running.
5. The watch cannot measure, or the data is not accurate.
Answer: A. Sit down before the measurement and put your body in a relaxed state with your arms level with your chest position. B. Adjust the tightness of the watch. The back of the watch should be close to the skin to prevent light leakage from the photoelectric sensar. C. Keep your body calm during the measurement. Talking/coughing/ sneezing and other movements will affect the accuracy of the measurement results.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>