Metal Water Finder TF-MiNi Compact and Mini Metal Detector User Manual

Metal Water Finder TF-MiNi Compact and Mini Metal Detector

• The operating in high voltage areas would limit the results and performance
• It’s better to turn off mobile while using the device.
• The operator Must remove any metals that might affect the operating Rings, watch, belt….
• Don’t store in high temperature or high humidity
• Any attempt to tamper the device or unapproved maintenance would void the warranty

The user must practice before starting the detecting operations and discoveries
Store in Cool and dry place 15-40 C 5%-75% humidity

Technical specification

intensity.
Specialized to detects:| Buried precious metals
---|---
Depth Search:| 5 M
Distance Search:| 20 M
Voice alerts:| Yes
---|---
Operating temperature:| From 15° C to 60° C
Storage temperature:| From 20° C to 60° C
---|---
Humidity:| It can be stored and work in the degree rate of air humidity of level 90%.
---|---
weight:| 90 g Composite with Sensors
400 g Full package with Carrying case
---|---
Dimensions:| 4.8×7.8×2.6 cm
Bag dimensions:| 13x18x5 cm

Device Parts

• Main Unit
  It is the unit responsible for the search. It is rechargeable and equipped with internal batteries and through which the audio and optical search results are issued

• ionic radar sensor
  This sensor is connected into the jack in the front of the device

• Wrist strap
  It is attached to the device and then to the wrist, which can be enlarged and reduced to fit the size of the wrist.

• Charger
  An electric charger to recharge the device’s battery
  Values: Input: 240-100VAC / 60-50Hz / 0.4 amps
  Output: 9 volts AC / 1 amp / 15 Watt.

1. Sensor antenna connection input
2. battery indicator
3. ON/OFF Button

Setup

1. Connect the radar sensor antenna to the device through the socket located at the front of the main unit of the device
2. Attach the wrist strap to the device and then attach it to the wrist in this way.

About The Device

The TF-MINI works on the integrated radar ionic detection system To detect buried precious metals that have passed their presence Under the earth tens to hundreds of years.

• TF-MINI is the smallest burial detector
• It is characterized by high dynamism and great ease of use
• So that it does not require complications in the work like other devices Only turn on the device, then this device will calibrate
• Automatic search area and start the search process.
• The device is also characterized by its light weight and small size Therefore, it can be easily carried and moved around
• Where it is placed on the hand and fixed to take the form of a sports wristwatch.
• The detection process occurs through sound alerts and light indicators
• Its gradation increases by approaching the target site gradually.
• This device identifies the locations of the buried metals through
• Detection of static magnetic fields of ionized metals as a result of
• The existence of a static electric field around it «and based on the theory that all
• An electric field generates a magnetic field around it, thus forming around the metal magnetic aura (static electromagnetic field)
• As a result of the ionization of the atoms of this metal as the special sensor antenna
• The device senses the locations of these metals and raises an increased acoustic alarm
• Deterioration in approaching the buried metal site and also increasing in indicators
• The optical frequency corresponds to the increase in the sound frequency when approaching the target.

Device Setup

• To start using the device, first we press the power key on the front of the main unit for two seconds to hear the welcome tone, so the device is in operating mode. Then we press the power button once to start the automatic calibration process and start searching.
• When starting the search process, the search antenna is directed towards the area to be searched and slowly progresses during the search.
• When the device senses the presence of a hidden target, it gradually begins to emit alert sounds and light indicators that increase with the proximity of the target to the sensing antenna.
• When the search process is finished, the device can be turned off by long pressing
• Press the on and off button to hear the tone of the switch off.

Search

Note :

• The strength of the ionic charges of the target depends on the type of metal and the period of its existence underground.
• The approximate depth of the target can be determined through the use of this unit, and that is after identifying and limiting the target point by directing the device towards the target and walking in any direction until the sound indicator is cut off. We measure the resulting distance from this point to the target point where it is the approximate distance

Charge

Warning

• Use only the charger that came with the device and do not use anything else.
• Store the charger in a safe place away from flammable materials
• Make sure to turn off the power after you finish using the device or before storing it.
• When the battery runs out while working, the device will sound an alert in addition to the low battery indicator in red.

1. The device is being charged while it is in an off state
2. When the charger is connected, an audible alert is issued stating that the charging process has begun.
3. The charging process continues until the battery is full, then repeated alerts are issued with the battery indicator flashing to withdraw the charger from the device.

References

• metaldetectors.com
• HOME - MWF METAL WATER GOLD DETECTORS

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>