CyberPower HT1206UC2RC1 12 Outlet Surge Protector User Manual

: June 17, 2024
: CyberPower

Table of Contents

CONGRATULATIONS ON YOUR PURCHASE
FEATURES
SPECIFICATIONS
TROUBLESHOOTING
TECHNICAL SUPPORT
LIMITED WARRANTY AND CONNECTED EQUIPMENT GUARANTEE
PRODUCT REGISTRATION
CONTACT INFORMATION
CONFORMANCE APPROVALS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CyberPower HT1206UC2RC1 12 Outlet Surge Protector User Manual

CONGRATULATIONS ON YOUR PURCHASE

Thank you for selecting the Cyber Power HT1206UC2RC1 Premium Surge Protector. This manual explains the features and operation of the HT1206UC2RC1. Please take a few moments to read this manual.

FEATURES

ON/OFF Reset Control Switch and Circuit Breaker Controls power to all outlets. The switch is also a 15A breaker. When an overload occurs, it will automatically switch off. To resume operation, ensure the overload condition is removed then reset the surge protector by switching the unit ON.
Firestop Design Advanced Metal-Oxide Varistor (MOV) with Built-In Fuses Encased component dissipates surge events and potential flame, sparks, and heat.
Wrapped Cord and Right-Angle Plug Easy to coil. Kink and abrasion-resistant cord with low-profile right-angle plug for easy cord management.
Clean Power – Ground LED Illuminated when properly grounded.
Advanced Protection – Surge Protected LED Illuminated when protection is working properly.
Twelve Outlets 6 standard and 6 transformer spaced outlets.
USB Charging Ports Connect and charge up to 4 USB devices using the surge protected USB charging ports. USB outlets cannot be used as a USB hub. This device does not transfer data.
Ethernet Cable Protection Compatible with Gigabit Ethernet.
Coaxial Cable Protection Protects coaxial lines from surges and spikes.

SPECIFICATIONS

Model Number: HT1206UC2RC1
Outlets: 6 standard and 6 transformer spaced outlets
USB Charging Rating : 5V/4.8A total
Power Cord Length: 6 ft · Surge Protection: 2,880 Joules
Electrical Rating: 125V/15A/1875W
UL Clamping Voltage: UL 1449 3rd/500V (H-N, H-G, N-G)
Maximum Peak Current: 90,000A
3 AC Lines Protected: H-N: 60,000A, H-G: 15,000A, N-G: 15,000A (The maximum surge possible on household wiring is 6,000 volts)
Response Time: Less than 1 nanosecond
Attenuation: Up to 43dB
EMI/RFI Filtration: 150 kHz to 100 MHz
Circuit Breaker: Resettable 15 Amp

CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK – Use only in dry locations and only indoors. DO NOT plug into another relocatable power tap. DO NOT “daisy chain” surge protectors. DO NOT use with any aquarium equipment. DO NOT use if properly grounded outlets are not available. DO NOT install this device if there is less than 10 meters (30 feet) or more of wire between the electrical outlet and electrical service panel. This device features an internal protection that will disconnect the surge protective component at the end of its useful life, but it will maintain unprotected power to the load.

TROUBLESHOOTING

If the grounded indicator does not light when you plug in the surge protector, move the surge protector to a different grounded three-prong AC outlet. If it still does not light, return the product to the dealer for assistance. If the surge protector proves to be working properly, your outlets may not be properly grounded and need to be repaired by a professional electrician. If the grounded indicator turns off after a period of use, the surge protection has been depleted. Replace your surge protector. If the protected indicator does not light, the surge protector’s AC lines is no longer protected from surge. The surge protector may have received a power surge or spike beyond its specified limits that overloaded the protection circuitry and rendered it inactive. The surge protector has protected your connected equipment as designed, but it will not protect against future surges, and spikes. It should be replaced.

TECHNICAL SUPPORT

Please contact our Tech Support Department with installation, troubleshooting, or general product questions.

Phone: 1-877-297-6937
Email: tech@cpsww.com
Hours of Operation: Monday Friday 7:00am 6:00pm CST

LIMITED WARRANTY AND CONNECTED EQUIPMENT GUARANTEE

Read the following terms and conditions carefully before using the Cyber Power HT1206UC2RC1 (the “CPS product”). By using the CPS product, you consent to be bound by the terms and conditions of this Limited Warranty and connected equipment guarantee (together referred to as this “Warranty”). IF YOU DO NOT AGREE TO THE TERMS AND CONDITIONS OF THIS WARRANTY, YOU SHOULD RETURN THE PRODUCT FOR A FULL REFUND PRIOR TO USING IT.

Who is providing this Warranty, what does it cover?
Cyber Power Systems (USA), Inc. (“Cyber Power”) provides this Limited Warranty. It only covers the original purchaser and ends if you no longer own the CPS product. This Warranty covers defects in materials and workmanship in the CPS product under normal use and conditions. It also covers equipment connected to the CPS product damaged because of the failure of the CPS product. This Warranty covers the CPS product and connected equipment for as long as you own the CPS product.

How do you open a connected equipment claim?

Call us at 877-297-6937, or write to us at Cyber Power Systems (USA), Inc., 4241 12th Ave. E., STE 400, Shakopee, MN 55379, or send us an email message at claims@cpsww.com for instructions, within 10 days of the occurrence.
When you contact Cyber Power, identify the product, the purchase date, and the item(s) of connected equipment. Have information on all applicable insurance or other resources of recovery/payment that are available to the Initial Customer, and request a claim number.
You must provide a dated purchase receipt (or other proof of the original purchase) for the Cyber Power unit and connected equipment. You also need to provide a description of the damage to your connected equipment.
4. Pack and ship the product to Cyber Power and, if requested, the item(s) of connected equipment, a repair cost estimate for the damage to the connected equipment, and all claim forms that Cyber Power provides to you. Show the claim number on the shipping label, or include it with the product. You must prepay all shipping costs. You are responsible for packaging and shipment, and you must pay the cost of the repair estimate.

What will Cyber Power do to correct problems?
Cyber Power will inspect and examine the CPS product. If the CPS product is defective in material or workmanship, Cyber Power will repair or replace it at Cyber Power’s expense, or Cyber Power will refund the full purchase price you paid for the CPS product (purchase receipt showing price paid is required). If the CPS product failed to protect any equipment plugged into it, we will also send you forms for making your claim for the connected equipment. We will repair or replace the equipment that was damaged because of the failure of the CPS product or pay you the fair market value (NOT REPLACEMENT COST) of the equipment at of the time of the damage. We will use Orion Blue Book, another third-party valuation guide, eBay, Craigslist, or other source to establish that amount. Our maximum liability is limited to $500,000 for the HT1206UC2RC1.

Who pays for shipping?
We pay when we send items to you; you pay when you send items to us.

What are some things this Warranty does not cover?

THIS WARRANTY DOES NOT COVER ANY SOFTWARE THAT WAS DAMAGED, NEEDS TO BE REPLACED DUE TO THE FAILURE OF THE CPS product, ANY DATA THAT IS LOST AS A RESULT OF THE FAILURE, THE RESTORATION OF DATA OR RECORDS, OR THE REINSTALLATION OF SOFTWARE.
This Warranty does not cover: misuse, modification, operation or storage outside of the environmental limits of the CPS product or the equipment connected to it, for damage while in transit or in storage, if there has been improper operation or maintenance, or use with items not designed or intended for use with the CPS product, such as laser printers, appliances, aquariums, medical, or life support devices, etc.

What are the other limitations?
The sole and exclusive remedies of the Initial Customer are those provided by this Warranty.

This Warranty does not apply unless the CPS product and the connected equipment were connected to properly wired and grounded outlets (including compliance with electrical and safety codes of the most current electrical code), without the use of any adapters or other connectors.
The CPS product must have been plugged directly into the power source. The equipment connected to the CPS product must be directly connected in the CPS product, not “daisy chained” together in serial fashion with any extension cords, another product or device similar to the CPS product, surge suppressor, or power tap. Any such installation voids the Warranty.
The CPS product and connected equipment must have been used properly in a suitable environment, in conformance with any applicable license, instruction manual, or warnings.
The CPS product must have been used at all times within the limitations on the CPS product’s VA capacity.

Where can I get more information? Contact CyberPower at 4241 12th Ave E., STE 400, Shakopee, MN 55379; call us at 877-297-6937; or send us an email message at claims@cpsww.com.

PRODUCT REGISTRATION

Prompt product registration assures coverage under the Limited Warranty, and also allows the opportunity of notifications for product enhancements, upgrades, and other announcements. Registration is quick and easy. Go to the Product Registration Page at www.cyberpowersystems.com/registration.

CONTACT INFORMATION

Cyber Power Systems, Inc. 4241 12th Avenue East Suite 400 Shakopee, MN 55379 Toll-free: 1-877-297-6937 | CyberPowerSystems.com

CONFORMANCE APPROVALS

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications to this unit, not expressly approved by the party responsible for compliance, could void the user’s authority to operate the equipment. This Class B digital apparatus complies with Canadian ICES-003 (CAN ICES-3 (B)/NMB (B)).
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and radiates radio frequency energy. If not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.