ECHOMASTER P-BUA-RANGER Wiring Harness for Backup Alarm Instruction Manual
- June 9, 2024
- Echomaster
Table of Contents
ECHOMASTER P-BUA-RANGER Wiring Harness for Backup Alarm
Thank you for purchasing the P-BUA-RANGER
WHAT’S INCLUDED
- Vehicle Specific Wire Harness (P-BUA-RANGER)
COMPATIBLE ACCESSORIES
- 97dB Backup Alarm (BUA-97C)
- 97dB White Noise Backup Alarm (BUA-97WNC)
TOOLS REQUIRED
- 10mm Nut-setter
- Impact Drill
- Diagonal Cutters
INSTALLATION
STEP 1:
Locate the OEM tail lamp connector that is on the outside of the driver-side
frame rail
STEP 2:
Unplug the OEM connector and install the P-BUA-RANGER harness between the OEM
connectors
STEP 3:
Route the harness over the top side of the frame rail, toward the center of
the truck
STEP 4:
Use an impact drill and 10mm nut-setter to install a compatible backup alarm
on the underside of the vehicle
Note: (2) 10mm TEK screws are provided with the compatible backup alarm
STEP 5:
Plug the backup alarm connector into the mating connector on the P-BUA-
RANGER harness. Secure any excess wiring with cable ties. Use diagonal cutters
to remove excess cable tie material.
STEP 6:
Test the backup alarm
Contact Information
Phone – 866-766-2267
E-Mail – [email protected].
EchoMaster is a Power Brand of AAMP Global
EchoMaster.com.