CyberPower CSB600WS 6-Outlet Surge Protector Wall-Tap User Manual
- October 30, 2023
- CyberPower
Table of Contents
YOUR ULTIMATE ALLY IN POWER
6-OUTLET
SURGE PROTECTOR
WALL-TAP
CSB600WS
USER MANUAL
FEATURES
-
Surge Protected Indicator
Illuminated when the surge protection feature is working properly. -
Ground Indicator LED
Illuminated when the Ground protection feature is working properly. -
Pivoting Standard Grounded Outlets (6)
Pivoting outlets for ease of use and convenience, fits standard-sized plugs.
SPECIFICATIONS
| Model Number: | CSB600WS |
|---|---|
| Outlets: | 6 Standard Grounded Outlets |
| Surge Protection: | 900 Joules |
| Electrical Rating: | 125 V / 15 A / 1875 W |
| UL Clamping Voltage: | UL 1449 4th / 400 V (H-N, H-G, N-G) |
| Maximum Peak Current: | 45,000 A |
| 3 AC Lines Protected: | H-N: 15,000 A, |
H-G: 15,000 A,
N-G: 15,000 A;
(The maximum surge possible on household Wiring is 6,000 volts)
Response Time:| Less than 1 nanosecond
Attenuation:| Up to 32 dB
EMI/RFI Filtration:| 150 kHz to 100 MHz
WARNING: This product can expose you to chemicals including bisphenol A (BPA) and styrene (ABS), which is known to the State of California to cause reproductive harm and cancer. For more information, go to www.P65Warnings.ca.gov.
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK:
Use only in dry locations and only indoors.
DO NOT plug into another relocatable power tap.
DO NOT “daisy chain” surge protectors.
DO NOT use with any aquarium equipment.
DO NOT use if properly grounded outlets are not available.
DO NOT install this device if there is less than 10 meters (30 feet) of wire
between
the electrical outlet and electrical service panel.
DO NOT use for medical or life support equipment. This device features an
internal protection that will disconnect the surge protective component at the
end of its useful life, but it will maintain unprotected power to the load.
TROUBLESHOOTING
If the grounded indicator does not light when you plug in the surge protector,
move the surge protector to a different grounded three-prong AC outlet. If it
still does not light, return the product to the retailer for assistance. If
the surge protector appears to be working properly, your outlets may not be
properly grounded and need to be repaired by a professional electrician.
If the protected indicator does not light, the surge protector’s AC lines are
no longer protected from surge. The surge protector may have received a power
surge or spike beyond its specified limits that overloaded the protection
circuitry and rendered it inactive. The surge protector has protected your
connected equipment as designed, but it will not protect against future
surges, and spikes.
It should be replaced.
FOR MORE INFORMATION
Visit CyberPowerSystems.com for more information regarding:
- Product information and certifications
- Product warranty
- Connected equipment guarantee
TECHNICAL SUPPORT
Visit:
CyberPowerSystems.com/support
Toll-Free: 1-877-297-6937
© 2022 Cyber Power Systems (USA), Inc. All rights reserved.
All other trademarks are the property of their respective owners.
CONFORMANCE APPROVALS
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Cyber Power Systems (USA), Inc.
4241 12th Avenue East, Suite 400 | Shakopee, MN 55379
CyberPowerSystems.com
Documents / Resources
|
CyberPower CSB600WS 6-Outlet Surge Protector Wall-
Tap
[pdf] User Manual
CSB600WS 6-Outlet Surge Protector Wall-Tap, CSB600WS, 6-Outlet Surge Protector
Wall-Tap, Surge Protector Wall-Tap, Protector Wall-Tap, Wall-Tap, Tap
---|---
References
- CyberPower UPS Systems, Battery Backup, PDUs, USB Surge Protectors
- Support | CyberPower
- P65Warnings.ca.gov
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>