MELODYSUSIE S Series Scarlet Electric Nail Drill Instruction Manual

MELODYSUSIE S Series Scarlet Electric Nail Drill

Thank you for choosing MelodySusie! Please read this user guide carefully and keep it in an accessible location so you may refer to it later.

IMPORTANT SAFEGUARDS
READ ALL INSTRUCTIONS BEFORE USING.

• To reduce the risk of burns, electrocution, fire or injury to persons.
• Please be sure to read the safety instruction as follow to avoid potential hazards that could result in personal injuries or damage to the device.

Check before Using

• Check the power supply cord before the first time use and during the life of the device. Do not use the device if it has a damaged cord or plug, or if it is not working properly.
• Do not plug the device into a voltage system that is not specified on the device or charger. Use with improper voltage will damage the device and VOID warranty.
• Use the original charger only.
• The handpiece of this nail drill is not compatible with other models of nail drill machines from MelodySusie and other brands. Please don’t connect the handpiece with a different nail drill machine.

Note for Using

• To prevent electric leakage and shock or fire, do not draw out the connecting wires during use or touch the plug with a wet hand. Turn the power off after use.
• Do not use the crooked or damaged nail drill bit or replace the bit when the power is on.
• Do not adjust the speed abruptly, stop use once the unusual movement and noise happens.
• Misuse, dropping, or excessive force may cause device damage.
• Minors should not use this device without parental consent and supervision.
• Do not cover the ventilation of the handpiece avoiding burning your hand or touching any rotating part while the device is working.

Maintenance Work

1. Do not disassemble the device. Doing so could be dangerous and constitutes voiding warranty conditions.
2. Do not keep the device in a metal box, car, or other place at high temperatures (more than 50° C). Keep the handpiece dry and away from oil and grease.
3. Do not store the device in a hot or humid environment. Store it in a cool and dry place.
4. Keep the electrical cord away from heated surfaces.
5. Do not dispose of the device in heat or fire.
6. Do not clean the device with harmful chemicals or detergents.

Note for Injury

• Having manicures done frequently can cause injuries to the nails as well.
• If you need to remove the gel polish of natural nails, try to use the nail polish remover pads to avoid damage to the nail bed with improper operation.
• Do not use the device if you have an open wound on your nail or hand.
• If you have any skin diseases, heat-sensitive, allergic reactions, onychomycosis, or any other disorder, you should consult your doctor and medical professionals before using the device.

The operator shall be responsible for any consequences including product damage or accidents if not strictly complies with the instructions. If you require any technical support, please contact us.

SAVE THE INSTRUCTION MANUAL

Six Drill Bits

1. Handpiece
2. Drill Bits Hole
3. Ventilation Holes
4. Speed Control Knob
5. ON/OFF
6. Power Indicator
7. Foot Pedal Jack
8. F/RButton
9. Handpiece Jack
10. DC Socket

How to Use

• Step 1: Choose one grinding drill bit, release the handpiece, insert the drill bit at the drill head and lock it in place. The drill bit hole could be used to place the nail drill bits.
• Step 2: Connect the handpiece to the handpiece jack.
• Step 3: Connect the foot pedal to the foot pedal jack.
• Step 4: Connect the power supply with the power control device in the DC socket.
• Step 5: Press the ON/OFF button to turn on the device.
• Step 6: Rotate the speed control knob to accelerate or decelerate the rotation speed.
• Step 7: Change the rotation direction of the grinding drill bit on the F/R button if needed.
• Step 8: After the polishing is finished, please turn off the device and rotate the central barrel and take out the drill bit. The handpiece hole could be used to place the handpiece when not in use.

NOTE:
When connecting the handpiece, please align with the handpiece connector and the handpiece jack correctly.

How to Replace Drill Bit

Please make sure that the desired bit is suitable for the collet.

• Do not move the central barrel during operation.
• Do not cover the ventilation holes on the handpiece, when using the device.

1. Turn the central barrel clockwise until hearing a “click” sound to release the drill bit. Taking out the blank bar. Put the desired bit into the handpiece.
2. Turn the central barrel counterclockwise until hearing a “click” sound to lock the drill bit in place.
3. Be sure to confirm the rotation of the bit and collet. Please take care of your fingers not to be hurt by the bit edge.

Problem and Terms of Settlement

Specifications

• Input voltage range: 100-240V 50/60Hz

• Output voltage: 24V/1A

• E-mail:  service@melodysusie.com

• E-mail:  service.uk@melodysusie.com

• Website:  www.melodysusie.com.

Warranty and Customer Service

MelodySusie offers a 6 months limited warranty on quality-related issues. Please apply for your extra 6 months warranty extension and download the instruction manual in other languages by registering on www.melodysusie.com if needed.

Thank you for purchasing from MelodySusie. You are welcome to share your experience after receiving the product. Please contact us for any technical support if needed.

• www.melodysusie.com
• US Service:  service@melodysusie.com
• UK Service:  service.uk@melodysusie.com
• FR Service:  service.fr@melodysusie.com
• DE Service:  service.de@melodysusie.com
• Whipple Rd, Union City, CA 94578

AMZLAB GmbH
Laubenhof 23, 45326 Essen, Germany.

THEM IS AR Support Ltd.
85 Great Portland St. London, United Kingdom, W1W 7LT.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>