DENON DNP-2000NE Network Audio Player User Guide
- May 15, 2024
- Denon
Table of Contents
DENON DNP-2000NE Network Audio Player
Before You Begin
This section provides an overview of the contents in the box and the additional items you may need to start using your DNP-2000NE Network Audio Player.
Specifications
| Contents of the Box | Required Items for Setup | Optional Items |
|---|
Quick Start Guide, Safety Instructions, Warranty (For North America model only), Note on radio, Network Audio Player, Power cord, Remote control (RC-1248), 2x AAA batteries, Audio cable, IR command cable, External antennas for Bluetooth®/Wi-Fi® connectivity| Amplifier, Speakers, Speaker cables, Wi-Fi router and Internet connection| HDMI® cable, Ethernet cable, Computer, USB cable, Mobile device
- Model: DNP-2000NE
- Type: Network Audio Player
- Wireless Connectivity: Wi-Fi
- Bluetooth: Yes
- Supported Platforms: Windows, Mac
Setup
- Connect the antennas by facing them towards the antenna terminals located on the upper left and right corners of the rear panel. Turn the antennas clockwise until fully connected without over-tightening. Then, position them upwards for best reception. Note: Antennas are necessary for Bluetooth and Wi-Fi functions.
- Connect the player to your amplifier by using audio cables from the player’s AUDIO OUT jacks to the amplifier’s AUDIO IN jacks.
- Optionally, connect the audio from your television using an HDMI cable with ARC (Audio Return Channel) functionality, if your TV and player support it. Make sure the audio output setting on your TV menu is set to PCM 2 channel audio, and note that Dolby Digital and DTS are not supported.
- Connect the power cord between the DNP-2000NE and a wall outlet.
- Install batteries into the remote control, observing the correct polarity.
Network Connection
Choose one of the following wireless setup options or configure a wired connection as indicated.
- For wireless setup using an iOS device with iOS 7 or later, power on the player, select the language, and ensure your iOS device is connected to your Wi-Fi network. Select ‘Denon DNP-2000NE’ from the Wi-Fi settings on your device.
- For routers without a WPS button, follow the same steps as above, then select ‘network search’ and wait for the DNP-2000NE to find available networks.
- For WPS routers, power on the player and select the language. Then choose ‘WPS router’ and press the WPS button on your router. Next, press the ENTER button on the remote within 2 minutes.
- For a wired connection, power on the player, select the language, and wait for the DNP-2000NE to connect to your network cable. Follow the on-screen instructions and wait a few minutes for the connection to be established. Enter your Wi-Fi password using the numeric keys on the remote if prompted.
Product Usage Instructions
Connecting Antennas:
Connect the optional antennas to the designated ports on the device.
Powering On:
Plug in the power cord and press the power button to turn on the device.
Language Selection:
Use the navigation buttons to select your preferred language and press
ENTER to confirm.
Wi-Fi Setup:
Follow the on-screen instructions to connect to a Wi-Fi network. You can
use either a WPS router or manually enter the Wi-Fi password.
Enjoying Your Music
Experience internet radio, Apple AirPlay, Bluetooth, and HEOS app for a versatile listening experience.
- For internet radio, press the INTERNET RADIO button on the remote, select the station, and press ENTER. Choose ‘Play Now’ and press ENTER again.
- For Apple AirPlay, open the Control Center on your iOS device, tap the AirPlay icon on the audio card, and select ‘Denon DNP-2000NE’ from the list of AirPlay devices. Then choose the music you wish to play from your iPhone, iPod touch, or iPad.
- For Bluetooth, press Bluetooth to select it. The DNP-2000NE will automatically enter pairing mode on first use. Enable Bluetooth on your mobile device and select ‘Denon DNP-2000NE’ from the list of Bluetooth devices. Play music using any application on your mobile device.
- Download and open the HEOS app to control your DNP-2000NE, create a HEOS account or log in with your existing account, and select ‘Denon DNP-2000NE’ from the ‘Rooms’ list in the app. Synchronize your preferred online streaming services or your personal music library with your HEOS account.
Listening to Computer Audio via USB-DAC
Install dedicated drivers for Windows or use native drivers for macOS for high-resolution audio playback.
- For Windows, download the dedicated driver from the Denon website, extract it, and install by following the on-screen instructions.
- Connect to the computer using a USB 2.0 cable (sold separately), and select ‘USB-DAC’ as the audio source on the player.
- Configure the playback software and sound settings on your computer to use the DNP-2000NE as the default audio output device.
Trademark Information
Apple, AirPlay, iPad, iPad Air, iPad Pro, and iPhone are registered
trademarks of Apple Inc. The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. HDMI and High-Definition Multimedia
Interface are trademarks or registered trademarks of HDMI Licensing, LLC. Wi-
Fi CERTIFIED™ is a trademark of Wi-Fi Alliance®.
Online Manual
For more detailed information and additional features, please refer to the
online manual at http://manuals.denon.com/DNP2000NE/NA/FR/.
Software Installation (Windows):
If connecting to a Windows PC, install the required driver software for
optimal performance.
Contact Information
For further information, please visit www.denon.com.
Printed in Japan 5411 11925 00AD
© 2023 Sound United. All Rights Reserved.
Frequently Asked Questions (FAQ)
How do I reset the device to factory settings?
To reset the DNP-2000NE to factory settings, navigate to the settings menu and look for the option to perform a factory reset. Confirm the action, and the device will be restored to its original state.
Can I use the DNP-2000NE with other audio equipment?
Yes, you can connect the DNP-2000NE to compatible amplifiers or speakers using the provided audio output ports for an enhanced audio experience.
How do I connect my DNP-2000NE to my network?
You can connect wirelessly using WPS or iOS device setup, or via a wired connection with an Ethernet cable. Follow the appropriate steps in the setup section for your method.
What should I do if the network connection fails?
If your wireless signal is weak, you may reposition the antennas on the back of the player or move the player closer to your router. If using a wired connection, check your Ethernet cable and router settings.
Can I listen to music from my mobile device?
Yes, you can stream music from your mobile device using Bluetooth, AirPlay, or HEOS application.
How do I update the firmware?
Enable automatic updates in the settings so that the latest firmware versions are downloaded and installed when the player is in standby mode.