shopify Maker Heart LED Locket Instructions
- June 17, 2024
- shopify
Table of Contents
Maker Heart LED Locket
Maker Heart LED Locket
This educational kit teaches simple circuits through the wiring of your LED and battery. Most of the parts can be re-purposed for other projects too, the battery holder & LED are awesome for cosplay or creating other glowing wearables, and you can hold small stuff in the locket!
- 1x Glow-in-the-Dark 3D Printed Heart Locket
- 1x SMT RGB LED
- 1x 3v Coincell Battery & Holder
- 1x Conductive e-Tape Strip
- 1x Lanyard
- No tools required, only scissors
- SMT = Surface Mount Technology (they are really small)
- RGB = Red / Green / Blue (cycles through colors)
Line up your parts as shown and cut your e-tape strips, then peel the backing and apply to pegs, making sure they do not touch each other
Insert 3v battery into the holder, then gently press/rock the battery holder onto the pegs over the etape, ensuring a good connection
Line up your LED chip as shown to complete your circuit {white ring = negative / red ring = positive}
Press down your e-tape and ensure the two circuit lines do not touch.
PRO TIP: You can use a dab of hot glue or super glue to hold your parts to the locket, just don’t glue over the circuit pegs!
Please Note: Small parts and cord choking hazards. We recommend ages 8+ for the electronics, your child’s skill levels may vary, we encourage parental supervision and participation!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>