kogan KATVCAR75LM Easel Studio TV Cart with Cabinet User Guide
- June 17, 2024
- Kogan
Table of Contents
kogan KATVCAR75LM Easel Studio TV Cart with Cabinet
EASEL STUDIO TV CART WITH CABINET
(SUITABLE FOR 49-75″ TVS)
KATVCAR75LM
SAFETY & WARNINGS
Read the entire user guide before you start installation and assembly. If you have any questions regarding any of the instructions or warnings, contact your local distributor for assistance.
CAUTION: Use with products heavier than the rated weights indicated may result in instability causing possible injury.
- Please closely follow the assembly instructions. Improper installation may result in damage or serious personal injury.
- Safety gear and proper tools must be used. This product should only be installed by professionals.
- This product includes an anti-tip kit that must be used in conjunction with the product and will prevent the unit from falling or tipping over. Follow the enclosed information to properly install these safety accessories.
- This product is designed to be installed on solid concrete walls, masonry walls or wood stud walls.
- Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
- Use the mounting screws provided and DO NOT OVER TIGHTEN mounting screws.
- This product contains small items that could be a choking hazard if swallowed. Keep these items away from children.
- This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
- Never exceed the maximum load capacity of 50kg or it may result in product failure or personal injury.
IMPORTANT: Ensure that you have received all parts according to the
component checklist prior to installation. If any parts are missing or faulty,
contact your place of purchase for a replacement.
MAINTENANCE: Check that the product is secure and safe to use at regular
intervals (at least every three months).
COMPONENTS
ASSEMBLY
Step 1:
Note: Lock the brakes on the casters (J) to avoid any sudden movements during
installation.
Step 2:
- Attach the parts (D) to part (E) using cam screws (S) and cam connectors (R).
- Cover the cam screws using the screw covers (Q).
Step 3:
Assemble the side plates (F, G) using cam screws (S) and cam connectors (R). Ensure panel (F) is positioned on the left side and panel (G) on the right side.
Step 4:
Attach the cabinet to the stand and secure it in place using M6x25 screws (N)
and washers (P) into the two lower installation holes.
Step 5:
- Tilt the cabinet up and using cable management strip, route the TV cables down the left side of the stand.
- Lower the front of the cabinet and install and tighten M6x25 screws (N) and washers (P) into the two upper installation holes.
- Tighten the screws on lower installation holes.
- Cover the screws using the screw covers (W).
Step 6:
- Ensure the 2 limiting screws are facing upwards and insert part (I) into the stand.
- Secure part (I) in place using 4 M8x25 screws (M) and attach the 2 end caps (K).
Note: If the TV is in the lower position the cable management strips will need to be shortened.
Step 7:
Align the brackets (H) with your TV’s VESA holes and secure using supplied
screws (“M-” set), Washer (M-E) and spacers (M-F, M-G) depending on required
length.
Step 8:
Hook the TV with brackets installed onto the stand. Two people should carry
the TV to prevent damage.
Note: Centre the TV bracket arms between the two limiting screws.
Once in place, use fasteners (O) to secure the brackets in place.
Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require, head online to
help.kogan.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>