Mr Beams MB542 Wireless Motion Sensor LED Stair Step Light Instruction Manual
- June 17, 2024
- Mr Beams
Table of Contents
Mr Beams MB542 Wireless Motion Sensor LED Stair Step Light Instruction
Manual
Important: These instructions can only be used with Mr. Beams products that
come with a remote.
Before you begin, these instructions are for customers who only wish to
activate their light via remote control. By removing the motion sensor, your
light will no longer activate with motion. The auto-shut off timer will still
turn the light off after selected time. These instructions are not for those
who are looking for a light to stay on for long periods of time. Please note
that once the sensor is removed, your warranty is void. We appreciate your
interest in our products and are more than happy to help you customize your
light for your specific need. Please call or email any questions to our
customer service. Phone: 1
877-298-9082 Email:
info@mrbeams.com
-
Remove rear cover of Path Light by removing 2 screws on back.
-
Open lid to reveal battery compartment and remove six screws. Pull battery compartment out at the seam to separate from face of light.
-
Flip battery compartment over to reveal circuit board. The motion sensor can be removed with needle nose pliers, gently twisting until it detaches from unit.
-
Remove light sensor with needle nose pliers, gently twisting until it detaches. Replace battery compartment into the light. Screw six screws securely and replace the battery door. See your user manual for installation instructions.
Surprisingly Bright Light Anywhere
www.mrbeams.com
32333 Aurora Rd. Suite 100 Solon, OH 44139
www.mrbeams.com 877.298.9082