SKYDANCE TW2-4 Dimmer Single Color User Manual

SKYDANCE TW2-4 Dimmer Single Color

Product Information

Specifications

• Model Numbers: TW1-4, TW2-4, TW4-4, TW5-4
• Product Type: Wall Mounted Touch Panel
• Supported Functions: RF DIM/CCT/RGB/RGBW/RGB+CCT
• Zone Configuration:
  • TW1-4: 4 Zone Dimming
  • TW2-4: 4 Zone CCT
  • TW4-4: 4 Zone RGB/RGBW
  • TW5-4: 4 Zone RGB+CCT
• Features:
  • Touch panel with 1-5 color options
  • Can control multiple RF 2.4G LED controllers
  • Ultra-sensitive high-strength glass touch panel
  • Touch the color wheel in the middle for easy color selection
  • Touch keys with LED indicator
  • Free installation with no wiring required
  • Removable design for flexibility
  • Powered by CR2032 battery
  • Available in White & Black colors

Product Usage Instructions

Installation

To install the Wall Mounted Touch Panel, follow these steps:

1. Select a suitable location on the wall for mounting.
2. Ensure that the surface is clean and dry.
3. Remove the adhesive backing from the panel.
4. Stick the panel firmly to the wall, ensuring it is level.

Pairing with LED Controllers

To pair the Touch Panel with RF 2.4G LED controllers, perform the following steps:

1. Ensure that the LED controllers are within the remote control range (30m).
2. Press and hold the pairing button on the LED controller until the LED indicator starts flashing.
3. On the Touch Panel, press and hold any of the touch keys until the LED indicator blinks.
4. The Touch Panel and LED controller are now paired. Repeat this process for each LED controller you want to control with the Touch Panel.

Using the Touch Panel

The Touch Panel offers various functions based on the model:

• TW1-4 (4 Zone Dimming):
  • Tap on the touch keys to control the brightness of each zone.
• TW2-4 (4 Zone CCT):
  • Tap on the touch keys to adjust the color temperature of each zone.
• TW4-4 (4 Zone RGB/RGBW):
  • Tap on the touch keys to select different colors for each zone.
• TW5-4 (4 Zone RGB+CCT):
  • Tap on the touch keys to control both color temperature and color selection for each zone.

FAQ

Q: What type of battery is used in the Touch Panel?

• A: The Touch Panel is powered by a CR2032 battery.

Q: What is the remote distance of the Touch Panel?

• A: The Touch Panel can be used within a remote distance of 30m from the LED controllers.

Q: Is the Touch Panel available in different colors?

• A: Yes, the Touch Panel is available in both White and Black colors.

MODELS

TW1-4,TW2-4,TW4-4,TW5-4

Wall-Mounted Touch Panel

• Touch panel 1-5 color 4 zone RF remote.
• Each touch panel can remotely control multiple RF 2.4G LED controllers.
• Ultra-sensitive strength glass touch panel with touch color wheel in the middle.
• Touch keys with LED indicator.
• Free installation, no wiring, removable.
• CR2032 battery powered.
• White & Black available.
• LVD RED 1-5 color/Glass touch panel/Touch color wheel/Wireless remote 30m distance/CR2032 battery

Technical Parameters

Mechanical Structures and Installations

• To fix the panel, three options are offered for selection:
• Option 1. Fix it on the wall with two screws.
• Option 2. Admit it to the wall with a paster.
• Option 3. The panel can be adsorbed directly onto metal surfaces.
• Note: If the LED indicator is not on when pressing the key, it is due to a dead battery or bad contact caused by multiple plugs, please replace the battery, or raise the battery shrapnel with a screwdriver

Installation diagram

Match with RF LED controller (two match ways)

An end user can choose the suitable match/delete ways.

Two options are offered for selection:

• Use the controller’s Match key

Match:

• Short press the match key, and immediately press the on/off key on the touch panel. The LED indicator fast flashes a few times means the match is successful.

Delete:

• Press and hold the match key for 5s to delete all matches.
• The LED indicator fast flashes a few times means all matched remotes were deleted.

Use Power Restart  Match:

• Switch off the power, then switch on the power, repeat. Immediately short-press the on/off key 3 times on the touch panel. The light blinks 3 times means the match is successful.

Delete:

• Switch off the power, then switch on the power, and repeat. Immediately short-press press on/off key 5 times on the touch panel. The light blinks 5 times means all matched remotes were deleted.

Key function

TW1-4 4 zone dimming panel

• Turn on/off all zone lights.
• Adjust brightness,10 levels.
• Touch to change brightness.
• In two scenes, the short press recalls the scene, and the long press 5s to save the current state into scene 1/2.
• Short press turn on the zone light and select zone simultaneously, long press 2s turn off the zone light. Short press the multiple zone key fast, will select multiple zone synchronously.
• 4 zone control seperately or synchronously, each zone could control multiple receivers.

TW2-4 4 zone CCT panel

• Turn on/off all zone lights.
• Adjust brightness,10 levels.
• Touch to change color temperature.
• In two scenes, the short press recalls the scene, and the long press 5s to save the current state into scene 1/2.
• Short press turn on the zone light and select zone simultaneously, long press 2s turn off the zone light.
• Short press the multiple zone key fast, will select multiple zone synchronously.
• 4 zone control seperately or synchronously, each zone could control multiple receivers.

TW4-4-4 zone RGB/RGBW panel

• Turn on/off all zone lights.
• Adjust brightness,10 levels.
• Short press run next dynamic mode, long press 2s run mode-cycle.
• For dynamic mode, adjust speed, short press 10 levels, and long press 2s get the default speed.
• For static RGB color, adjust saturation, short press 11 levels, and long press 1-6s for continuous adjustment.
• For RGB light, short press to get white (RGB mix).
• For RGBW light, short press to get white (W channel), and long press 1-6s to adjust W brightness.
• Touch to change static RGB color.
• Short press turn on the zone light and select zone simultaneously, long press 2s turn off the zone light.
• Short press the multiple zone key fast, will select multiple zone synchronously.
• 4 zone control seperately or synchronously, each zone could control multiple receivers.

TW5-4 4 zone RGB+CCT panel

• Turn on/off all zone lights.
• Adjust brightness,10 levels.
• Short press run next dynamic mode, long press 2s run mode-cycle.
• For dynamic mode, adjust speed, short press 10 levels, and long press 2s get the default speed.
• For static RGB color, adjust saturation, short press 11 levels, and long press 1-6s for continuous adjustment.
• Adjust color temperature,11 levels. Touch to change static RGB color.
• Short press turn on the zone light and select zone simultaneously, long press 2s turn off the zone light.
• Short press the multiple zone key fast, will select multiple zone synchronously.
• 4 zone control seperately or synchronously, each zone could control multiple receivers.

TW5-4 zone light typesetting

• Each zone can match a single color, dual color(WW/CW), RGB/RGBW, or RGB+CCT(WW/CW) controller.
• Long press any of the keys and any of the four function keys for 2 seconds, which will change one zone light type.
• Long press any of the keys and any of the four function keys for 2 seconds, will change all four zone light types at the same time.
• Long press 2 seconds, set 1, 2, 3, or 4 zones as single color type.
• Long press 2 seconds, set 1, 2, 3, or 4 zones as dual color type.
• Long press 2 seconds, set 1, 2, 3, or 4 zones as RGB/RGBW color type.
• Long press 2 seconds, set 1, 2, 3, or 4 zones as RGB+CCT type.
• Long press 2 seconds, set all 4 zones as single color type.
• Long press 2 seconds, set all 4 zones as dual color type.
• Long press 2 seconds, and set all 4 zones as RGB/RGBW color type.
• Long press 2 seconds, and set all 4 zones as RGB+CCT type.
• For example, If you want to change zone 1 light type to RGB type, please long press and key 2 seconds,
• When set is OK, the LED indicator will lighten red and blue.

TW1-4 and TW2-4 scene locking

• Scene keys can be set to locked state, cancel long press for 5 seconds to save the scene function (default scene is not locked).
• Short press the panel on/off key, turn on the light first, then turn off the light, immediately long-press the panel on/off key for 5 seconds, then immediately long press any one scene key for 5 seconds to set all scene keys to locked state.
• Short press the panel on/off key, turn on the light first, then turn off the light, immediately long-press the panel on/off key for 5 seconds, then immediately long press any one scene key for 10 seconds to restore all scene keys to unlocked state.

Safety information

1. Read all instructions carefully before you begin this installation.
2. When installing a battery, pay attention to the battery’s positive and negative polarity.
   • After a long time without the remote control, remove the battery.
   • When remote distance becomes smaller and insensitive, replace the battery.
3. If no response from the receiver, please re-match the remote.
4. Gently handle the remote, beware of falling.
5. For indoor and dry location use only.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>