OttLite 31700R SlimLine Desk Lamp User Manual

: June 17, 2024
: OttLite

Table of Contents

OttLite 31700R SlimLine Desk Lamp
TUBE INSERTION/REPLACEMENT
WHAT’S IN THE BOX
PRODUCT DIMENSIONS
FEATURES
HOW TO USE
MAINTENANCE
PRECAUTIONS
TROUBLESHOOTING
FREQUENTLY ASKED QUESTIONS
Read User Manual Online (PDF format)
Download This Manual (PDF format)

OttLite 31700R SlimLine Desk Lamp

This product complies with Part 18 of FCC Rules but may cause interference to radios, televisions, wireless telephones, and remote controls. Avoid placing this product near these devices. If interference occurs, move the product away from the device or plug either into a different outlet. Do not install this product near maritime safety equipment or other critical navigation or communication equipment operating between 0.45-30 MHz

CONGRATULATIONS! You’ve purchased the finest in natural lighting technology with your new OttLite® product.

PRODUCT REGISTRATION FORM

Please complete the enclosed Product Registration Form and return it today by mail, or register online by going to: http://warranty.OttLite.com.

WARNING: To prevent electric shock, make sure the lamp is not plugged in until all assembly steps are complete.

LAMP ASSEMBLY

Align base as shown. Install base screw (A) loosely by hand.
Tighten the base screw until snug.

TUBE INSERTION/REPLACEMENT

Make sure the lamp is not plugged into an electrical socket.
If the lamp has been in use, allow it to cool for approximately 5 minutes before proceeding.
Raise the shade so access to the tube is possible.
To install a tube in the socket, hold the tube firmly at the non-base end with your thumb and forefinger. Align into the socket, then press the base into the socket until it “snaps” into place (B).
To remove a tube already installed in the lamp, grasp it firmly at the free end between thumb and forefinger. Use your free hand to push your fingers and tube away from the socket. Do not twist or turn the tube.
CAUTION: Take care to prevent the tube end from hitting the shade. Tube breakage may result.
Return the shade to the desired position.
Plug a lamp into a standard 120V, 60Hz socket. Your lamp is ready to use.
Turn the lamp on or off by pushing switch (C) in.

Please note that in operation, OttLite® tubes are not dimmable. Enjoy your OttLite® SlimLine Task Lamp! This lighting system is designed for use with OttLite® type bulbs (style number PL13-E). Use of other products voids the warranty and may result in d For more information on purchasing replacement tubes/bulbs please go to www.OttLite.com/replacement13wtube

WHAT’S IN THE BOX

Desk Lamp
User Manual

PRODUCT DIMENSIONS

FEATURES

Compact Design: The SlimLine Desk Lamp can be conveniently stowed away by folding the arm, providing an efficient space-saving solution.
Adjustable Flexibility: With an articulating arm adaptable from 14.75 to 19.75 inches and a swiveling shade, this lamp offers a versatile range of motion.
Energy-Efficient Lighting: Equipped with a 13-watt Type E bulb that can be easily replaced, offering up to 10,000 hours of energy-efficient illumination.
Customizable Illumination: The lamp features an adjustable shade to minimize glare and reduce eye strain during extended use.
Daylight Simulation: OttLite prioritizes replicating natural daylight indoors, ensuring accurate color representation, reduced glare, and minimal eye strain.
Corded Operation: Designed to operate with corded electric power, providing consistent and reliable energy.
Room Versatility: Suitable for various spaces, including offices, dens, bedrooms, craft rooms, and sewing rooms.
Elegant Aesthetic: With a sleek white design, the lamp adds a stylish touch to any workspace.
Varied Lighting Options: Adjust the lighting method to suit specific tasks and preferences.
USB Connectivity: Featuring USB connectivity technology, the lamp adds functionality for charging compatible devices.

HOW TO USE

As needed, tighten or loosen the two pivot joints (D) using a coin. Be careful to not overtighten the joints.
Shade height and angle can be changed by grasping the shade and base and moving it up or down.
The shade can also be rotated right and left at the upper joint.

MAINTENANCE

Regularly clean the lamp with a damp cloth to eliminate dust and dirt.
Ensure smooth movement of the articulating arm and swiveling shade by checking for any obstructions.
Replace the bulb following the manufacturer’s guidelines.
Inspect the power cord for damage and replace if necessary.
Wipe the lamp’s surface to preserve its sleek appearance.
Check the USB port for debris, cleaning it with a dry cloth if needed.
Store the lamp in a cool, dry place when not in use to prevent dust buildup.
Unplug the lamp during extended periods of non-use to conserve energy.
Examine adjustable points for wear or loosening, tightening as needed.

PRECAUTIONS

Avoid overextending the articulating arm to prevent damage.
Handle the lamp carefully, avoiding forceful adjustments.
Refrain from using the lamp in wet conditions to prevent electrical hazards.
Place the lamp on a stable surface to prevent tipping accidents.
Adhere to the recommended wattage when replacing the bulb.
Keep the lamp away from heat sources to avoid potential damage.
Do not attempt to disassemble the lamp; seek professional help for repairs.
Replace a damaged power cord or plug immediately.
Avoid direct sunlight exposure to prevent discoloration.
Exercise caution when using the USB port to prevent overloading.

TROUBLESHOOTING

If the lamp fails to power on, check the power source and verify the functionality of the push-button switch.
Confirm smooth movement of the articulating arm and swiveling shade without obstructions.
If the lamp flickers or provides uneven lighting, consider replacing the bulb with a new 13-watt Type E version.
Examine the power cord for visible damage or fraying; replace if necessary.
If the USB port malfunctions, inspect for debris and ensure compatibility with connected devices.
In case of an unusual odor or smoke, immediately unplug the lamp and seek professional assistance.
If the lamp becomes excessively hot during use, turn it off and allow it to cool before resuming operation.
For electrical issues, avoid self-repair attempts and contact OttLite customer support.