kogan KAPWB45SLBA Ultra Slim 4500mAh Power Bank User Guide
- June 17, 2024
- Kogan
Table of Contents
kogan KAPWB45SLBA Ultra Slim 4500mAh Power Bank
Product Specifications
- Model: KAPW B45SLBA/KAPW B45SLSA
- Battery Capacity: 4500mAh
- Input: DC 5V/1A
- Output: DC 5V/1A
Product Layout and Connections
The UltraSlim 4500mAh PowerBank has the following layout and connections:
- A: Power Indicator LED
- B: Input Port
- C: Output Port
- Power Button
- Multi-lead
Power Indicator LED
The Power Indicator LED is located at position A on the PowerBank. It shows
the current power level of the device.
Charging the PowerBank
Before using the PowerBank for the first time or after an extended period
of non-use, it is recommended to fully charge the unit. Follow these steps to
charge the PowerBank:
- Connect the provided charging cable to the Input Port (B) of the PowerBank.
- Plug the other end of the charging cable into a USB power source.
- The Power Indicator LED will start flashing to indicate that the PowerBank is charging.
- Once fully charged, all four LED lights will be solid.
Note : If you are not using the PowerBank for an extended period of time, it is recommended to fully charge it at least once every three months to maintain optimal battery performance.
Power Indicator Levels
Press the Power Button to check the power level of the PowerBank. The LED
lights will indicate the following:
- 1 LED lights up: Battery level is less than 25% charged
- 2 LED lights up: Battery level is between 25% and 50% charged
- 3 LED lights up: Battery level is between 50% and 75% charged
- 4 LED lights up: Battery level is between 75% and 100% charged
Charging Devices with the PowerBank
The UltraSlim 4500mAh PowerBank can be used to charge various devices such
as smartphones, tablets, and other USB-powered devices. Follow these steps to
charge your device:
- Connect one end of the charging cable (compatible with your device) to the Output Port (C) of the PowerBank.
- Connect the other end of the charging cable to your device.
- Press the Power Button on the PowerBank to start charging.
Product Care
To ensure the longevity of your UltraSlim 4500mAh PowerBank, follow these
care instructions:
- Avoid exposing the PowerBank to extreme temperatures or direct sunlight.
- Keep the PowerBank away from water, moisture, and other liquids.
- Do not disassemble or attempt to repair the PowerBank yourself.
- Avoid dropping the PowerBank or subjecting it to strong impacts.
- Use only the provided charging cable or compatible cables to charge the PowerBank and your devices.
FAQ
Q: Where can I find the complete user manual for the UltraSlim 4500mAh
PowerBank?
A: The complete user manual can be found at https://manual-hub.com/.
Q: What is the recommended charging frequency for the PowerBank if not in
use?
A: It is recommended to fully charge the PowerBank at least once every
three months if not in use.
Product Specifications
- Capacity: 4500mAh
- Lifespan: up to 5000 hours
- Input: DC 5V/1A (max)
- Output: DC 5V/1.5A (max)
- Dimensions: 131 x 70 x 8mm
- Weight: 125g
Product Layout and Connections
- A – iPad/iPhone/iPod tip
- B – Micro USB tip
- C – iPhone 5+ tip
Usage
Charging the Power Bank
Important: before first use, please FULLY charge the Power Bank using the
supplied cable.
- Connect the Micro USB connector to the Input port on the Power Bank.
- Connect the USB connector on the multi-lead to an empty USB port on your laptop/PC or other USB power equipment.
- While the Power Bank is charging, the LED indicator light will flash.
- When the Power Bank is fully charged, all 4 LED indicator lights will stop flashing.
- Disconnect the USB cable from the USB port and from the Power Bank.
- Press the Power Button to see the power status. When all 4 LEDs are lit, it means the unit is fully charged.
Note : it is recommended that if you are not using the Power Bank for an extended period of time, the unit should be fully charged at least once every three months.
Four LED Indicator Lights
Press the Power Button to see the power level of the Power Bank.
- LED lights up : < 25% charged
- LED lights up: 25 – 50% charged
- LED lights up: 50 – 75% charged
- LED lights up: 75 – 100% charged
Charging Devices with the Power Bank
- Connect the multi-lead (or the original USB cable from your device) to the Output USB port of the Power Bank.
- Connect the other end of the USB cable with the correct tip, (or the other end of the original USB cable) to your device,them press the Power Button.
- After charging, remove the USB cable from both devices.
Product Care
- Do not allow the Power Bank to be immersed into water or other liquids. It is not waterproof.
- Do not press the Power Button with excessive force.
- Do not expose the Power Bank to extreme temperatures.
- Do not attempt to open the Power Bank or repair it yourself. Doing so will void the warranty.
- Clean the Power Bank with a soft dry cloth only.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>