SKYDANCE WT5 WiFi and RF 5 in1 LED Controller User Manual

SKYDANCE WT5 WiFi and RF 5 in1 LED Controller

Product Information

Specifications

• Dimensions: 38.00 mm
• Input: 12-24VDC
• Product Model: WT5
• Function: WiFi & RF 5 in 1 LED Controller
• Features: Control RGB, RGBW, RGB+CCT, colour temperature or
  single color LED strip; DC power socket input; 5 channel constant
  voltage output; Tuya APP cloud control; Voice control with Amazon
  Alexa, Google Assistant, Tmall Genie, and Xiaodu smart speakers; RF
  2.4G remote control optional; WiFi-RF converter functionality;
  Light on/off fade time 3s selectable.

Mechanical Structures and Installations

• Power input: + and –
• Installation rack
• DC socket input
• LED indicator
• Match/Set key

System Wiring

• + (Positive)
• R (Red)
• UN (Unused)
• MATCH/SET (Match/Set key)
• – (Negative)
• WW (Warm White)
• CW (Cold White)
• B (Blue)
• G (Green)
• R (Red)

Safety and EMC

• EMC Standard: ETSI EN 301 489-1 V2.2.3, ETSI EN 301 489-17 V3.2.4
• Safety Standard: EN 62368-1:2020+A11:2020
• Radio Equipment (RED) Certification: CE, EMC, RED

Warranty and Protection

• Warranty: 5 years
• Protection: Reverse polarity, Over-heat, Short circuit

Product Usage Instructions

Light Type Configuration

Before connecting to the Tuya APP network and matching the RF remote, you must set the light type by pressing the Match/Set key.

Tuya APP Cloud Control

• Download and install the Tuya APP on your mobile phone.
• Connect the WT5 controller to your WiFi network.
• Open the Tuya APP and add the WT5 controller as a device.
• Once added, you can use the Tuya APP to control various functions such as on/off, RGB colour, colour temperature, brightness adjustment, delay turn on/off light, timer run, scene edit, and music play.

Voice Control

The WT5 controller supports voice control with Amazon Alexa, Google Assistant, Tmall Genie, and Xiaodu smart speakers. Set up the voice control feature according to the instructions provided by your smart speaker.

RF Remote Control (Optional)

If you have an RF remote control, you can pair it with the WT5 controller by following these steps:

1. Make sure the WT5 controller is in the appropriate light-type mode.
2. Press and hold the Match/Set key for 16 seconds until the RUN LED indicator turns blue.
3. Release the Match/Set key.
4. The controller is now ready to be paired with the RF remote control.

WiFi-RF Converter

The WT5 controller can also work as a WiFi-RF converter. This allows you to control one or more RF LED controllers or RF LED dimming drivers synchronously using the Tuya APP.

Light On/Off Fade Time

You can select a fade time of 3 seconds for the light to gradually turn on or off.

FAQ

• Q: What is the input voltage range for the WT5 controller?
• A: The WT5 controller is compatible with input voltages ranging from 12V to 24V DC.
• Q: What is the maximum output power of the WT5 controller?
• A: The WT5 controller can provide a maximum output power of 5 x (36-72)W, depending on the connected LED strips.
• Q: Can I control different types of LED strips with the WT5 controller?
• A: Yes, the WT5 controller supports control of RGB, RGBW, RGB+CCT, colour temperature, or single-colour LED strips.
• Q: How far can I control the WT5 controller using the Tuya APP or RF remote control?
• A: The control distance for the WT5 controller is approximately 30 meters in a barrier-free space for both WiFi and RF control.
• Q: What is the warranty period for the WT5 controller?
• A: The WT5 controller comes with a 5-year warranty.
• Q: What protections are provided by the WT5 controller?
• A: The WT5 controller has protection against reverse polarity, overheating, and short circuits.

WiFi & RF 5 in1 LED Controller

• 5 1 function, used for control RGB, RGBW, RGB+CCT, colour temperature or single colour LED strip.
• DC power socket input and 5-channel constant voltage output.
• Tuya APP cloud control, support on/off, RGB colour, colour temperature and brightness adjust, delay turn on/off light, timer run, scene edit and music play function.
• Voice control, support for Amazon Alexa, Google Assistant, Tmall Genie and Xiaodu smart speakers.
• Match with RF 2.4G remote control optional.
• Users need to set the light type by pressing the key before the Tuya APP network connection and matching the RF remote of the same light type.
• Each WT5 controller can also work as a WiFi-RF converter, and then use the Tuya APP to synchronise one or more RF LED controllers or RF LED dimming drivers.
• Light on/off fade time 3s selectable.

Technical Parameters

Input and Output

• Input voltage: 12-24VDC
• Input current: 15.5A
• Output voltage: 5 x (12-24)VDC
• Output current: 5CH,3A/CH
• Output power: 5 x (36-72)W
• Output type: Constant voltage

Package

• Size: L120 x W43 x H35mm
• Gross weight: 0.055kg

Dimming data

• Input signal: Tuya APP + RF 2.4GHz
• Control distance: 30m(Barrier-free space)
• Dimming grayscale: 4096 (2^12) levels
• Dimming range: 0 -100%
• Dimming curve: Logarithmic
• PWM frequency: 1000Hz (default)

Environment

• Operation temperature: Ta: -30 OC ~ +55OC
• Case temperature (Max.): Tc: +85OC

Safety and EMC

• EMC standard (EMC): ETSI EN 301 489-1 V2.2.3 ETSI EN 301 489-17 V3.2.4
• Safety standard: EN 62368-1:2020+A11:2020
• Radio Equipment(RED): ETSI EN 300 328 V2.2.2
• Certification: CE, EMC, RED

Warranty and Protection

• Warranty: 5 years
• Protection: Reverse polarity Over-heat Short circuit

Mechanical Structures and Installations

System wiring

Note

1. The above distance is measured in a spacious (no obstacle) environment, Please refer to the actual test distance before installation.
2. Please check if the WiFi router net in the 2.4G band, the 5G band is not available, and do not hide your router network.
3. Please keep the distance between WT5 devices and router close, and check the WiFi signals.

Wiring Diagram

For RGB+CCT

• Press and hold the match/set key for 16s, until the RUN LED indicator turns blue, then release, the controller will become RGB+CCT type, then do smart conFIg by tuya APP, or short press match key to match with RGB+CCT RF remote.

For RGBW

• Press and hold the match/set key for 14s, until the RUN LED indicator turns green, then release, the controller will become RGBW type, then do smart conFIg by tuya APP, or short press match key to match with RGBW RF remote.

For RGB

• Press and hold the match/set key for 12s, until the RUN LED indicator turns red, then release, the controller will become RGB type, then do smart conTIg by Tuya APP, or short press match key to match with RGB RF remote.

For dual-colour CCT

• Press and hold the match/set key for 10s, until the RUN LED indicator turns yellow, then release, the controller will become CCT type, then do smart conTIg by tuya APP, or short press match key to match with CCT RF remote.

For single color

• Press and hold the match/set key for 8s, until the RUN LED indicator turns white, then release, the controller will become DIM type, then do smart conIRg by Tuya APP, or short press match key to match with dimming RF remote.

Note

1. Users can connect a constant voltage or power adapter as power input.
2. Press and hold the Match/Set key for 2s, and switch 5 kinds of light type in sequence.
3. For RGB+CCT or CCT light type, continuous power on and off will change 3 levels of colour temperature (WW, NW and CW) in sequence.
4. Switch off the power, then switch on the power, repeat.
   Immediately short-press press match key 3 times, and the light on/off time will change between 3s and 0.5s.

Tuya APP network connection

• Please download the corresponding Tuya/smart life app according to your region.
• Push twice the Match/Set key fastly, or when press and hold the Match/Set key for 8-16s to set 5 kinds of light type:
• Clear the previous network connection, and enter Smart config mode, the purple LED indicator flash fast, and the output LED will flash 10 times.
• Press and hold the Match/Set key for 2s:
• Switch 5 kinds of light type in sequence, notice this operation does not automatically clear the previous network connection.
• Press and hold the Match/Set key for 5s:
• Clear the previous network connection, enter AP config mode, and the purple LED indicator flash slowly.
• If the smart config fails, please try the AP config.
• Repeat power on and off for 5 consecutive times, also clear the previous network connection, enter Smart config mode, and the output LED will flash 10 times.
• If the Tuya APP network connection succeeds, the RUN LED indicator will stop flashing purple, and turn the corresponding light type colour (White: DIM, Yellow: CCT, Red: RGB, Green: RGBW, Blue: RGB+CCT). in Tuya APP, you can find RGB+CCT device (or other
• DIM, CCT, RGB or RGBW).

Tuya APP interface

White interface

For DIM type
Touch the brightness slide to adjust brightness.
For RGB type
Touch the brightness slide, get RGB mixed white first, then adjust white brightness.
For RGBW type
Touch the brightness slide, and adjust the white channel brightness.

Colour interface

For RGB or RGBW type:

• Touch the colour wheel to adjust static RGB colour.
• Touch the brightness slide to adjust colour brightness.
• Touch saturation slide to adjust colour saturation, namely gradient from the current colour to white (RGB mixed).

For RGB+CCT type

• Touch the colour wheel to adjust static RGB colour, and WW/CW will turn off automatically.
• Touch the brightness slide to adjust colour brightness.
• Touch saturation slide to adjust colour saturation, namely gradient from the current colour to white (RGB mixed).

Music, Timer, Schedule

• The music player can use a smartphone music player or micro-phone as music signal input.
• The Timer key can turn on or turn off the light in the next 24 hours.
• The Schedule key can add multiple timers to turn on or turn off lights according to different periods.

Color temperature interface

For CCT type

• Touch the colour wheel to adjust the colour temperature.
• Touch the brightness slide to adjust brightness.

For RGB+CCT type

• Touch the colour wheel to adjust colour temperature,
• RGB will turn off automatically.
• Touch the brightness slide to adjust the white brightness.

Scene interface

• The 1-4 scene is static color for all light types. the inner colour of these scenes can be editable.
• The 5-8 scene is dynamic mode for RGB, RGBW,
• RGB+CCT type, such as green fade in and fade out, RGB jump, 6 colour jump, 6 colours smooth.

WT5 match remote control (Optional)

The end user can choose the suitable match/delete ways. Two options are offered for selection:

Use the WT5’s Match key

Match

• Short press the match key of WT5, and immediately press the on/off key (single zone remote) or zone key (multiple zone remote) on the remote.
• The LED indicator fast flashes a few times means the match is successful.

Delete
Press and hold the match key of WT5 for the 20s,
The LED indicator fast flashes a few times means all matched remotes were deleted.

Use Power Restart

Match

• Switch off the power of WT5, then switch on the power, and repeat.
• Immediately short press the on/off key (single zone remote) or zone key (multiple zone remote) 3 times on the remote.
• The light blinks 3 times means the match is successful.

Delete

• Switch off the power of WT5, then switch on the power, and repeat.
• Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 5 times on the remote.
• The light blinks 5 times means all matched remotes were deleted.

WT5 works as a WiFi-RF converter to match the RF LED controller or dimming driver

The end user can choose the suitable match/delete ways. Two options are offered for selection:

Use the controller’s Match key

Match
Short press the match key of the controller, and immediately press the on/off key on the Tuya APP.
The LED indicator fast flashes a few times means the match is successful.

Delete
Press and hold the match key of the controller for 5s,
The LED indicator fast flashes a few times means the match was deleted.

Use Power Restart

Match
Switch off the power of the controller, then switch on the power, and repeat.
Immediately short-press press on/off key 3 times on the Tuya APP.
The light blinks 3 times means the match is successful.

Delete
Switch off the power of the controller, then switch on the power, and repeat again.
Immediately short-press the on/off key 5 times on the Tuya APP.
The light blinks 5 times means the match was deleted.

Dynamic mode list

For RGB/RGBW

For RGB+CCT

Installation Precautions

1. The products shall not be stacked, the distance should be ≥ 20cm, so as not to affect the lifespan of the products due to poor heat dissipation.
2. The product shall not be installed close to the switching power supply with an interval of ≥ 20cm to avoid radiation interference of the switching power supply.
3. The installation height shall be ≥ 1m from the floor to avoid shortening the remote control distance due to too weak reception signal.
4. The products are not allowed to be close to or covered by metal objects, with an interval of ≥ 20cm to avoid signal attenuation and shorten the remote distance.
5. Avoid installation at the corner of the wall or the corner of the beam, with an interval of ≥ 20cm to avoid signal interference.

FCC STATEMENT

15.19 Labeling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Information to the user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC RF Radiation Exposure Statement

1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
2. This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment.

This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>