belkin WIA007 Universal Easy Align Wireless Charging Pad User Guide

June 16, 2024
belkin

belkin WIA007 Universal Easy Align Wireless Charging Pad

Product Information

  • Specifications:
    • Model: BoostCharge Pro Universal Easy Align Wireless Charging Pad
    • SKU: WIA007
    • Input: ~12V 2A
    • Output: 15W

Product Usage Instructions

  • Connect the Power Supply
    • Connect the wireless charger’s power supply to a nearby power outlet that is easily accessible.
  • Indoor Use Only
    • Use this product only indoors and in a dry location. Avoid charging your device near heat sources or moisture.
  • Keep Away from Liquids
    • Keep the wireless charger and the power supply away from any liquids or moisture.
  • Disconnect When Not in Use
    • Unplug the wireless charger when not in use for extended periods.
  • Storage Recommendations
    • Do not store your device in extremely hot or cold places. It is recommended to use the wireless charger within the temperature range specified in the user manual.
  • Frequently Asked Questions (FAQ)
    • What should I do if I experience problems with the wireless charger?
    • If you experience problems with the wireless charger, please discontinue use, unplug the power supply from the socket, and contact Belkin for assistance.
    • Where can I find the marking information?
    • The marking information is located at the bottom of the apparatus.
    • What are the FCC regulations for this equipment?
    • Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
    • What are the regulatory requirements in Canada?
    • This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to certain conditions regarding interference and radiation exposure limits.
    • Can I adjust the power output level?
    • If available, you can achieve a greater reduction in RF exposure by keeping the product as far away from the user’s body as possible or adjusting the power output level to a lower setting.

HOW TO USE

Be Ready For Today™belkin-WIA007-Universal-Easy-Align-Wireless-
Charging-Pad-FIG-1 \(1\) belkin-WIA007-Universal-Easy-Align-Wireless-Charging-Pad-FIG-1
\(2\) belkin-WIA007
-Universal-Easy-Align-Wireless-Charging-Pad-FIG-1 \(3\) belkin-WIA007-Universal-Easy-Align-Wireless-
Charging-Pad-FIG-1 \(4\)

BoostCharge Pro

  • Universal Easy Align Wireless Charging Pad 15W
  • Chargeur a induction avec alignement facile (15 W)belkin-WIA007-Universal-Easy-Align-Wireless-Charging-Pad-FIG-1 \(5\)
  • SKU/MODEL: WIA007

Regulatory and Sustainability Information

NORTH AMERICA Safety Instructions
WARNING: Failure to follow these instructions could result in fire, electric shock, injury, or damage to the user, product, or other property.

  1. Connect the power supply of the wireless charger to a power outlet that Is close by and is easy to disconnect from.
  2. Use Indoors and in a dry location only; Avoid charging near sources of heat or humidity.
  3. Keep the wireless charger and power supply away from any liquids or moisture.
  4. Unplug the wireless charger when not in use for long periods.
  5. Do not store your device in very hot or very cold locations. It is recommended to use your device at room temperature.
  6. Do not use if visible defects are observed on the wireless charger or power supply.
  7. Do not attempt to service, modify, or disassemble the wireless charger or power supply.
  8. Use of a power supply not recommended or sold by Belkin may result in an increased risk of fire, electric shock, injury, or damage to the user, product, or other property.
  9. The wireless charging power transmission rate is regulated by the wireless charging device receiving power which can be influenced by factors like, but not limited to, proprietary charging protocols, ambient temperature, current battery percentage level and age of the device being charged.

CAUTION: If you experience problems with the wireless charger, please discontinue use, unplug the power supply from the socket, and contact Belkin for assistance. The marking information is located on the bottom of the apparatus.

FCC

FCC Statement
DECLARATION 6F CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY

  • We, Belkin International,
  • Inc., of 555 S. Aviation Blvd.,
  • Suite 180,
  • El Segundo,
  • CA 90245, USA,
  • Tel: +1(310)
  • 751 5100, declare under our sole responsibility that this product complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

  1. this device may not cause harmful interference and
  2. this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference In a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used Following the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular Installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the distance between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver Is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC Caution:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

  • Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.
  • Innovation, Science, and Economic Development Canada Statement (ISED): This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).

Operation is subject to the following two conditions:

  1. This device may not cause interference.
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

Radiation Exposure Statement:

  • This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment.
  • This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.
  • Innovation, Science and Economic Development Canada Statement: This digital apparatus complies with CAN ICES-003(8) / NMB-003(6).

UKCA Conformity:

  • We, Belkin International, Inc., declare that the radio equipment complies with Radio Equipment
  • Regulations 2017, RoHS Regulations 2012, and WEEE Regulations 2013
  • The full text of the UKCA declaration of conformity is available at the following Internet address: www.belkin.com/doc.
  • Waste Electrical and Electronic Equipment Directive
  • For information on product disposal, please refer to http://www.belkin.com/uk/weee-regulations/.
  • Under and per Article 14 of the Directive 2012/19/EU of the European Parliament on waste in electrical and electronic equipment (WEEE).
  • The barred symbol of the rubbish bin shown on the equipment indicates that, at the end of its useful life, the product must be collected separately from other waste.
  • Therefore, any product that has reached the end of its useful life must be given to a waste disposa I centre specializing in separate collection of waste electrical and electronic equipment or given back to the dealer when purchasing a new WEEE, under and following Article 14 as implemented in the country.
    • Frequency band in which the radio equipment operates: 127.7 kHz, 360 kHz, 111-148 kHz
    • Maximum power transmitted: -1.81 dBμA/m @10m

UKCA Conformity:

  • We, Belkin International, Inc., declare that the radio equipment complies with Radio Equipment
  • Regulations 2017, RoHS Regulations 2012, and WEEE Regulations 2013.
  • The full text of the UKCA declaration of conformity is available at the following Internet address: www.belkin.com/doc.
  • Recycling program. s for this packaging may not exist, in your area.

Waste Electrical and Electronic Equipment Directive

  • For information on product disposal, please refer to http://www.belkin.com/uk/weee-regulations/.
  • According to and per Article 14 of the Directive 2012/19/EU of the European Parliament on waste in electrical and electronic equipment (WEEE).
  • The barred symbol of the rubbish bin shown on the equipment indicates that, at the end of its useful life, the product must be collected separately from other waste.
  • Therefore, any product that has reached the end of its useful life must be given to waste disposal centres specializing in separate collection of waste electrical and electronic equipment or given back to the dealer when purchasing a new WEEE, under and per Article 14 as implemented in the country.

Information for end-users as per COMMISSION REGULATION (EU) 2019/1782

Manufacturer’s name or trademark, commercial registration number and address| Shenzhen Aoda Power Technology Co., Ltd.
Model identifier| A923-120200W·EU2
Input voltage(unit· V)| 100-240V-
Input AC frequency (unit: Hz)| 50/60Hz
Output voltage(unit: V)| 12.0VDC
Output current (unit: A)| 2.0A
Output power (unit:W)| 24.0W
Average active efficiency (unit:%)| 87.07%
Efficiency at low load (10%) {unit %)| 81.42%
No-load power consumption (unit W)| 0.089W
The above information is also available as part of the EU declaration or conformity at the following Internet address: www.belkin.com/doc.

  • Belkin International, Inc. El Segundo, CA 90245, USA
  • Belkin Ltd., Unit 1, Regent Park, Booth Drive, Wellingborough, Northants NNS 6GR, United Kingdom
  • Belkln BV., Herikerbergweg 106, Plaza Arena – Jupiter, 1101 CM, Amsterdam, The Netherlands
  • Belkin Asia Pacific Ltd. Hong Kong
  • japansupport@belkin.com.
  • Belkin Tech Support: www.belkin.com/support.
  • 8850bt01737
  • Rev. A00
  • MODEL: WIA007

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals