Cloudy Bay LJD008BLXX 8 Inch Smart LED Recessed Ceiling Light Installation Guide
- June 15, 2024
- Cloudy Bay
Table of Contents
Cloudy Bay LJD008BLXX 8 Inch Smart LED Recessed Ceiling Light
Product Information
Specifications:
- Model: LJD008BLXX
- Size: 8 inches
- Technology: Bluetooth LED
- Type: Recessed Down Light
Product Usage Instructions
Manual Control Through ON/OFF Wall Switch
- Ensure that each turn-on lasts for more than 10 seconds to prevent accidental pairing and blinking.
- If the light blinks due to wrong operation, allow it to blink for 10 seconds.
- Turn off the wall switch and then turn it back on to restore the light to its paired status.
Radiation Exposure and Distance
This equipment complies with FCC radiation exposure limits for an
uncontrolled environment. To ensure safety, the equipment should be installed
and operated with a minimum distance of 20cm between the radiator and your
body.
Wire Clamp Exclusion
Note: Wire clamp is not included with the product.
Contact Information
If you encounter any issues or require assistance, please contact the
seller through the following channels:
- E-mail: smart@cloudybaylighting.com or info@cloudybaylighting.com
- Toll-Free Phone Number: (1) 877-870-5171
We are committed to resolving any questions, comments, suggestions, or complaints you may have. Your satisfaction is our top priority.
FAQ (Frequently Asked Questions)
-
Q: How do I prevent the light from accidentally entering pairing mode?
A: Ensure that each turn on lasts for more than 10 seconds. -
Q: What should I do if the light blinks due to wrong operation?
A: Allow the light to blink for 10 seconds, then turn off the wall switch and turn it back on to restore the light to its paired status. -
Q: How far should I keep the radiator from my body?
A: The radiator should be installed and operated with a minimum distance of 20cm between it and your body. -
Q: What should I do if I have trouble using the product?
A: Please contact the seller through the provided e-mail or refer to the troubleshooting section in the manual.
Thank you for purchasing Cloudybay Smart LED Lighting Fixtures.
GENERAL: All electrical connections must be by local and National Electrical Code (N.E.C.) standards. If you are unfamiliar with proper electrical wiring connections, contact and obtain the services of a qualified electrician. Use UL or IEC approved wire only for input/output connections. Remove fixture and mounting components from the box, and make sure that no parts are missing, by referencing the illustration in the illustration instructions. This retrofit assembly is accepted as a component of a led luminaire where the suitability of the combination shall be determined by csa or canadian authorities having jurisdiction. This device is not intended for use with emergency exits.
XX= WH, ORB or other finish color
- Turn power off before installation, inspection, or removal.
- Use all necessary precautions while performing this procedure.
- Properly ground electrical enclosure. THE OUTLET BOX MUST BE PROPERLY GROUNDED.
- DO NOT REVERSE THE HOT AND NEUTRAL CONNECTIONS, OTHERWISE SAFETY WILL BE COMPROMISED.
- This Integrated LED Fixture has no lamp/bulb to replace.
- WARNING – RISK OF ELECTRIC SHOCK. DISCONNECT MAIN POWER AT FUSE OR CIRCUIT BREAKER BEFORE INSTALLING OR SERVICING THE FIXTURE.
PRODUCT CARE
After Sales Service
- Please discontinue to use the product right away if the product shows any visible defect and contact customer service.
- If there is any problem with our lights for non-human reasons, please contact customer service, and we will send you a brand-new replacement without the need to return goods or a full refund.
- If you are not completely satisfied with the product after installation but prefer not to disassemble it, contact us right away, we will provide comparable compensation.
About Manual Control Through ON/OFF Wall Switch:
- Please make sure duration of each turn on is more than 10 seconds so that it won’t enter pairing and start blinking by mistake.
- If light blinks due to wrong operation, please let it blink for 10 seconds and turn off wall switch, then turn back on, so it will recover to paired status.
WARNING- RISK OF FIRE OR ELECTRIC SHOCK
- LED Ultra Slim Panel kit installation requires knowledge of luminaires electrical systems. If not qualified, do not attempt installation. Contact a qualified electrician.
- Install this kit only in luminaires that have the construction features and dimensions shown in the photographs and/or drawings and where the input rating of the panel kit does not exceed the input rating of the luminaire.
- Do not make or alter any open holes in an enclosure of wiring or electrical components during kit installation.
- To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.
- The inside of the ceiling must be waterproof.
Component list
Note: This product is a smart light, using Direct Digital Controls rather than triac dimming. Here is two dimming way for you reference:
- Download Cloudy Bay’s APP, go to product group or single product page, adjust the brightness and CCT of white light or color light on control panel; you can also go to home page, click product group or single product’s common function, adjust brightness and color temperature
- Control with smart voice device such as Google Assistant or Amazon Alexa if you have installed it successfully.
If you only have a dimmer at hand, set it to highest level only. If light performance is not good, we strongly advise you to change it to a regular switch.
INSTALLATION INSTRUCTIONS
- Cut a round hole in 0 8-1/4 inch with a template in package. (Fig. 1)
- Insert flat screwdriver’s blade into knock out hole, swing left and right until the metal plate fall down. (Fig.2)
- Put wire clamp into knock-out hole. (Fig. 3) (wire clamp is not included)
- Open connection box by pulling up the cover (Fig.4)
- Insert the white supply wire (neutral) into quick wire connector with the preassembled white fixture wire. Insert the black supply wire (hot) into quick wire connector with the preassembled black fixture wire. Insert supply ground wire into quick wire connector with the preassembled ground wire. Make sure all connections are secure tuck all wires into the junction box. Put on the cover of the junction box(Fig.4)
- Connect the low-voltage cable to the light kit – the arrows on the male and female parts of the connector between the driver and the fixture should match. (Fig.5)
- Squeeze both TORSION SPRINGS arms together and insert into the above ceiling. (Fig.6)
- Installation is completed. (Fig.7)
- Set up products according to user manual and voice guideline
- Please contact seller through E-mail for assistance or refer to troubleshooting if you have a problem in using our products
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
This device may not cause harmful interference, and This device must accept
any interference received, including interference that may cause undesired
operation.
NOTE: This equipment has been tested and under Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used by the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiver antenna.
- Increase the separation between the equipment and receiver.
- Install the product onto on a circuit different from that to which the receiver is connected.
- Consult with the dealer or an experienced radio/TV technician for help.
CAUTION: Any changes made to the electronics circuit will void this
equipment’s compliance with Part 15 of the FCC Rules and should not be
operated.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance 20cm between the radiator and your body.
3-Year Limited Warranty
LIMITED WARRANTY : This fixture is warranted to be free from defects in workmanship and material for up to 3 years. Based upon reasonable household usage, when used by package and included instructions. If this fxture does not last for the period guaranteed, the manufacturer will send you a replacement fixture upon receipt of the returned fixture, register receipt, and proof of purchase. To contact us, please email us at smart@cloudybaylighting.com to find out how to return the fixture. We are committed to making high-quality products. Returning the fixture will help us monitor and further improve product quality. This replacement is the sole remedy available, and LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IS HEREBY EXPRESSLY EXCLUDED
QUESTIONS? COMMENTS? SUGGESTIONS? COMPLAINTS?
Please contact with us through
Toll-Free Phone Number: (1)
877-870-5171
smart@cloudybaylighting.com or
info@cloudybaylighting.com We will do our
best to make it right for vou. Thank you very much!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>