SUNSTONE SUNJKDIV6 Universal Appliance Jacket Installation Guide
- June 13, 2024
- SUNSTONE
Table of Contents
UNIVERSAL APPLIANCE JACKET
PRODUCT
6″ JACKET DIVIDER BOX PANEL
Item No. SUNJKDIV6
DESCRIPTION
6″ JACKET DIVIDER BOX PANEL FOR CREATING JACKET COMBINATIONS WITHIN A SINGLE CUT-OUT
PRODUCT DIMENSIONS
6″ WIDTH x 14-1/4″
HEIGHT x 25-3/4″
DEPTH
CUT-OUT DIMENSIONS
ADD ADDITIONAL 2-1/4″
TO CUTOUT FOR ANY
TWO JACKET
COMBINATIONS
PRODUCT DIMENSIONS
CUT-OUT DIMENSIONS
ADD ADDITIONAL 2-1/4″ TO ANY TWO JACKET COMBINATIONS, OR DOUBLE THIS LENGTH FOR ANY THREE JACKETS
CONNECT DIVIDER BETWEEN “ANY” TWO OPPOSING APPLIANCE JACKETS
DIVIDER BOX SETUP
- Place SUNJKDIV6 upside down
- Slide each adjoining jacket over divider box panel, each jacket mounting flange overlaps the divider.
- Screw in all provided screws, which are included with unused jacket side panel.
- Be sure all screws are tightened down securely, then flip entire connected jackets right side up.
JACKET PANEL INSTALL
If using any Burner Jackets, these have an additional back support panel, which can be installed between with jacket side panel and the adjacent divider box side.
Mount the lower front vent panel between each jacket side and center divider box panel.
SUPPORT
TECH SUPPORT
888-934-9449
WWW.SUNSTONEMP.COM
Documents / Resources
|
SUNSTONE SUNJKDIV6 Universal Appliance
Jacket
[pdf] Installation Guide
SUNJKDIV6 Universal Appliance Jacket, SUNJKDIV6, Universal Appliance Jacket,
Appliance Jacket, Jacket
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>