MONSTER XKO13 True Wireless Bluetooth Headphone Instruction Manual
- June 16, 2024
- Monster
Table of Contents
Monster Airmars XKO13
True wireless Bluetooth headphone instruction manual
Product parameters
- Bluetooth version————————V5.4
- Transmission distance———————≥10m
- Driver diameter———————Φ13mm
- Driver impedance—————————16Ω±15%
- sensitivity——————————–117±3dB
- Frequency response———————–50Hz-20KHz
- Battery capacity(Charging case)——————400mAh 3.7V
- Battery capacity(Headphone)———————–45mAh 3.7V
- Charging time(Charging case)———————≈2 hours
- Music playtime(Headphone)———————–≈5 hours
- Music playtime with charging case————–≈25 hours
Product Schematic Description
Product Schematic Description
Charge the charging case
Connect the charging case to the 5V power adapter with Type-C charging cable.
Rated input: 5V 45mA(Headphone) Rated input: 5V 400mA(Charging case)
TIPS: When the cover of the charging box is closed, the indicator light
of the charging box flashes ice-blue, please charge the charging box.
Indicator guide
Mode| Describe|
Sound prompt
---|---|---
Power On| Ice blue light of the headset blinks three times| “Power on”
Power Off| Red indicator light on the headphones remains on for 1 second and
goes off| Power off”
Pairing| Ice blue and red lights of the headset flash alternately| “Pairing”
Connected| Headphones LED indicator is off.| “Connected”
Disconnected| Ice blue and red light flashes alternately in the main ear, and
the secondary ear is extinguished| “Disconnected”
Low Battery| Red indicator on the headset blinks| “Battery low”
Headphones placed in charging case| Ice blue indicator light of the charging
case is bright| –
Charging case low power| Blue indicator of the charging case blinks|
–
Charging case charged| Red indicator of the charging case blinks|
–
Charging case fully charged| Red light of the charging case is bright| –
Product operating instructions
-
Power on
Method 1：Open the top cover of the charging case, and the headset will turn on automatically;
Method 2：Long press the MFB button of the left/right headset for about 3 seconds to power on the headset. -
Power off
Method 1：Put the earphone back in the charging case, close the cover of the charging case, and the earphone will automatically shut down;
Method 2：The device automatically shuts down after 3 minutes of disconnection from the Bluetooth device. -
Pairing
Step one: Open the top cover of the charging case, and the headset will turn on automatically;
Step two: Open the Bluetooth list of smart devices, search for “Monster Airmars XKO13” to pair, and the connection is successful After that, you will hear the “Connected” tone * Headphones will try reconnecting to the device within 3 minutes when connection is lost.
NOTE:
- Fully charge the headphones and power off before an intended not-in-use period.
- Unplug the charging cable after charging.
Operation
Normal
Music playback
Restore factory settings
When you turn on the headphone, make sure it does not connect to any Bluetooth
device, and click the MF button 5 times to clear the pairing record, then turn
off the headphone.
Precautions
- Take out the earphone from the charging box, without pressing any button, the earphone will automatically turn on, connect or pair, put the earphone into the charging box, and the charging box will automatically Charge your headphones. Turn them off.
- Often clean, long life, if not used for a long time, it is recommended to charge once every 15 days to extend battery life, and the charging part of the headset is often used with cotton swabs Alcohol wipe, can help smooth charging, avoid bad contact, affect the use experience.
- The battery [battery pack or battery combination] shall not be exposed to lighting, baking or similar overheating environment; Do not disassemble, knock, squeeze or throw. In the fire, if there is serious swelling, do not continue to use; Do not place in high temperature environment; Do not use after soaking water.
- Because this product adopts wireless connection mode, it is affected by environment, mobile phone brand, usage behavior and other factors in daily use. It may be normal to have a brief, slight sound delay during the playing of music.
Warnings
- Do not use headphones at high volume for an extended perios of time.
- Keep the headphones away from dust and water.
- Do not disassemble the headphones and accessories, otherwise warranty will be voided.
- Keep headphones away from any impact or vibration.
- Do not use any chemical solvents or cleaning agent on the headphones.
| Name of the Parts | Hazardous Substances |
|---|---|
| Pb | Hg |
| Housing | 0 |
| Loudspeakers | 0 |
| PCBA | X |
| Accessories | X |
This table is compliled according to SJ/T 11364
O : Indicates that this hazardous substance contained in all of the
homogeneous materials for this part is below the limit requirement in GB/T
26572.
X : Indicates that this hazardous subatance contained in at least one of the
homogeneous materials used for this part is above the limit requirement in
GB/T 26572.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver isconnected.
— Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference(2) this device must accept
any interference received, including interference that may cause undesired
operation. Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 0cm between the radiator and your body.
FCCID：2A8PV-QSMXKO13
Environment Friendly Use Period (EFUP)
This logo refers to the period (10 years) during which the hazardous
substances in electronic and electrical produsts will not leak or mutate so
that the use of these [substances] will not result in any severe environmental
pollution, any bodily injury or damage to any assets.
Warranty Service
Dear user, this warranty card is the proof of your future warranty
application, please cooperate with the seller to fill it out and keep it for
future use!
User info
User name| | Email|
---|---|---|---
Contact number| | Postal code|
Mailing address|
Product information
Product name| | Product number|
---|---|---|---
Product barcode / Serial number / Batch number|
Vendor information
Name|
---|---
Address|
Contact number| | Postal code|
Sates date| | Invoice number|
Remark|
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>